Also have the same problem - I get an incoming call into the nokia E72, but cannot hear the other side, dispite going right through the advanced settings - and yes I put 'nokia.stun' into the protocol settings to no avail.
I have set the E72 into the DMZ of my router so there can be no NAT issues or firewall issues.
Might try and downgrade the Voip to 2.x. Seems nokia don't seem to care about this common problem, which must have a easy fix because the E71 works fine!
trampjuice, this thread is about the contact header field. In this thread, no call is received at all. Because your call is established on signalling level, you are facing another issue. If your Nokia is your exposed host, do you need STUN at all? Try to use 0.0.0.0 as server address in the Firewall/NAT section, then. Do you have access to some sort of traffic-logs?
Hello all.My problem is the same: i may do a outgoing calls from my E52 that register as a client of nec sv8100 by sip, but i can't receive incoming calls from another client of the same station. pbx can not find my nokia by URI that generate my sip application. i right understand that when i downgrade sip modules and application in my e52 i resolve this problem.
sorry for my english))))
i have a local SIP regestere and i used to register E72 using internet tel but now ith advanced voip setting i am able to make calls, but i am not able to receive calls could any one please help me?
Could any one tel me about any other Voip Clint to use?
also i need to buy 10 phones that can send and receive calls over Local SIP Regestere, so could any one help me to chose the best phone for my clint?
your cooperation is highly approciated.
Last edited by slayre; 2011-01-30 at 10:35. Reason: Mistake