I have a Nokia 32, and i want to do the following:
When I call the GSM number from the terminal it should open the PBX line and call an INTERNAL number. The pbx line connected with the the terminal is giving an inside house dial tone, but it dials for an ouside line instead of dialling the internal number.
I have tried different internal numbers with **####**1234*9**xxx# 555**# but this does not help.
Also I have trouble getting the configuration software into the 'pbx' mode....I can controle the I/O interfaces, but not the PBX terminal.
I have a NOKIA 32 PBX, i already setup it and i try communicate with hyperterminal, using COM1 and (2400 bits per second, 8 data bits, None parity, 1 Stop bits, hardware Flow Control). and I Apply it, in the status BAR it appears connected, but I Cant' type on the terminal...