×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    6

    Using AT Commands

    Hi All,

    I have a 6310i which appears to be poorly supported at present, the many questions and complaints I have read here only confirm my own findings. I am considering using AT commands to get around the connectivity problems. Two questions:

    [1] Where do I find an example (any language) for using AT commands?
    [2] Is there a common standard that works with Nokia, Ericsson, Siemens etc.?

    I only have about 20,000 users :-)

  2. #2
    Registered User
    Join Date
    Mar 2003
    Posts
    24

    RE: Using AT Commands

    > [1] Where do I find an example (any language) for using AT commands?
    AT commands do not need any special technique, just open the virtual COM port of your phone and send AT commands to it.


    > [2] Is there a common standard that works with Nokia, Ericsson, Siemens etc.?

    Please refer to GSM 7.05 and GSM 7.07 from ETSI/3GPP.

    Hope this helps,

    William WK Lee
    Hong Kong

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •