×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    9

    Intensity of field, network signal strenght; base station number

    AT+CSQ outputs received power from the network (looks to be within 0-31, according to at+csq=?). But how to read the base station number/identification? Or how to read either in CORBA?

  2. #2
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    439

    RE: Intensity of field, network signal strenght; base station number

    Hi,

    AT+creg? (enables or disables network registration information)
    AT+creg=2 (enables location information)
    AT+creg? (registration and location information)
    +CREG: 2,1,"0B1A","1789"
    2 = enables registration and location information
    1 = registered to the homenetwork
    "0B1A" = Location area code in hexadecimal format
    "1789" = Cell ID in hexadecimal format

    If you are using corba, then you can get these information
    by using GetParam () request which includes NetworkRegistration
    parameter.

    BR,

    M2M developer support team

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×