Hi all!
I have problems using the nokia voip client: I can not register to the service easily.

The problem is that the embedded client doesn't permit me to access to the stun configuration.
A possible solution I found is to put the phone into the dmz but I don't like that idea: into dmz I can register to my voip provider.
Another way is to send configuration (the xml file) with OMA: I used the client from http://www.nowsms.com and also the following configuration xml file.

# <?xml version="1.0"?>
# <!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN" "http://www.wapforum.org/DTD/prov.dtd">
# <wap-provisioningdoc>
# <characteristic type="APPLICATION">
# <parm name="APPID" value="w9013"/>
# <parm name="PROVIDER-ID" value="Skypho VoIP"/>
# <parm name="NAME" value="Skypho VoIP"/>
# <parm unknown="" value="sipphone"/>
# <parm name="SMPORT" value="8000"/>
# <parm name="EMPORT" value="8020"/>
# <parm name="MEDIAQOS" value="26"/>
# <parm name="HRBTIMER" value="2"/>
# <parm name="UAHTERMINALTYPE" value="1"/>
# <parm name="ACMPL"/>
# <parm name="CFNOANS"/>
# <parm name="CFBUSY"/>
# <parm name="CFUNCOND"/>
# <parm name="REDUNDANCY"/>
# <parm name="VOIPPLUGINUID" value="0x1027541F"/>
# <characteristic type="CODEC">
# <parm name="MEDIASUBTYPE" value="1"/>
# <parm name="PRIORITYINDEX" value="1"/>
# </characteristic>
# <characteristic type="CODEC">
# <parm name="MEDIASUBTYPE" value="3"/>
# <parm name="PRIORITYINDEX" value="2"/>
# </characteristic>
# <characteristic type="CODEC">
# <parm name="MEDIASUBTYPE" value="0"/>
# <parm name="PRIORITYINDEX" value="0"/>
# </characteristic>
# <characteristic type="CODEC">
# <parm name="MEDIASUBTYPE" value="4"/>
# <parm name="PRIORITYINDEX" value="3"/>
# </characteristic>
# <characteristic type="VOIPURIS">
# <parm unknown="" value="sipphone"/>
# </characteristic>
# </characteristic>
# <characteristic type="APPLICATION">
# <parm name="APPID" value="w9010"/>
# <parm name="NAME" value="Skypho SIP"/>
# <parm unknown="" value="sipphone"/>
# <parm name="PROVIDER-ID" value="Skypho VoIP"/>
# <parm name="PTYPE" value="IETF"/>
# <parm name="PUID" value="12345@voip.eutelia.it"/>
# <characteristic type="APPADDR">
# <parm name="ADDR" value="voip.eutelia.it"/>
# <parm name="LR"/>
# <characteristic type="PORT">
# <parm name="PORTNBR" value="5060"/>
# </characteristic>
# </characteristic>
# <characteristic type="APPAUTH">
# <parm name="AAUTHNAME" value="12345"/>
# <parm name="AAUTHSECRET" value="54321"/>
# <parm name="AAUTHDATA" value="voip.eutelia.it"/>
# </characteristic>
# <characteristic type="RESOURCE">
# <parm name="URI" value="voip.eutelia.it:5060;transport=UDP"/>
# <parm name="AAUTHNAME" value="12345"/>
# <parm name="AAUTHSECRET" value="54321"/>
# <parm name="AAUTHDATA" value="voip.eutelia.it"/>
# </characteristic>
# </characteristic>
# <characteristic type="APPLICATION">
# <parm name="APPID" value="w902E"/>
# <parm name="NAME" value="sipphone NAT/FW settings"/>
# <characteristic type="NW">
# <parm unknown="" value="sipphone domain specifics"/>
# <parm name="DOMAIN" value="voip.eutelia.it"/>
# <parm name="STUNSRVADDR" value="stun.voip.eutelia.it"/>
# <parm name="STUNSRVPORT" value="3478"/>
# <parm name="NATREFRESHTCP" value="30"/>
# <parm name="NATREFRESHUDP" value="20"/>
# <parm name="CRLFREFRESH"/>
# </characteristic>
# </characteristic>
# </wap-provisioningdoc>

That file is from http://www.vocesuip.com/1-vt3589.html?start=0
This xml is to a nokia n80

Unluckly it seems the voip client does not work yet with that configuration file: outside the dmz I can not register.

I am going to take a dump and I am going to analyze it....


I think it could be enough to install any plugin or similar that permit to change the stun configuration....

I tryed fring but I don't like that tool. Do you suggest any other tool?

What do you think? did you find the way? How did you solve?


Thanks

Marco Strullato