×

Discussion Board

Page 1 of 2 12 LastLast
Results 1 to 15 of 16
  1. #1
    Regular Contributor
    Join Date
    Sep 2006
    Posts
    185

    Post Certificate Error!

    Hi,

    Please help I cannot signed mysis file by certificate symbiansigned why?
    Look there message when I signSIS:
    Could not verify signature with know algorithm, exiting.
    verification failure, invalid signature.
    but the Certificate by Self-Signing it's not show for me any error message.

    Thanks.

  2. #2
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,344

    Smile Re: Certificate Error!

    Hi,

    Read the following thread:
    http://discussion.forum.nokia.com/fo...d.php?t=106836

    And follow the steps provided in the following post:
    http://discussion.forum.nokia.com/fo...9&postcount=11

    Kiran.

  3. #3
    Regular Contributor
    Join Date
    Sep 2006
    Posts
    185

    Re: Certificate Error!

    Hey Kiran... Thanks for help, I have successfully signed by symbiansigned but when the installation after chose MMC or PhoneMemory i have this message appear:
    Required application access not granted
    I remember this msg is appear for me when i use self-signed certificate.

  4. #4
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,344

    Smile Re: Certificate Error!

    Hi,

    Check this Antony's blog: http://blogs.forum.nokia.com/view_entry.html?id=93

    I hope you have included all the required capabilities in your Developer Certificate.

    Kiran.

  5. #5
    Regular Contributor
    Join Date
    Sep 2006
    Posts
    185

    Re: Certificate Error!

    yeah i'm adding all application capabilities by Symbian Developer Certificate Request.
    but it's still appear that message!

  6. #6
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,344

    Question Re: Certificate Error!

    Quote Originally Posted by Zero 6630 View Post
    yeah i'm adding all application capabilities by Symbian Developer Certificate Request.
    but it's still appear that message!
    Which capabilities your application require?
    Have you tired with installing simple "HelloWorld" application yet?

    If you require Developer Certificate then i hope you have gone through this link:
    http://discussion.forum.nokia.com/fo...9&postcount=11

    Kiran.

  7. #7
    Regular Contributor
    Join Date
    Sep 2006
    Posts
    185

    Re: Certificate Error!

    I don't know what capabilities is that require my application!
    but I ask you How I know what capabilities my application require?

    yeah in fact I gone through this link, and I hope to give me the solution Step-4 exactly.
    for solution this problem.

  8. #8
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,344

    Smile Re: Certificate Error!

    Quote Originally Posted by Zero 6630 View Post
    I don't know what capabilities is that require my application!
    but I ask you How I know what capabilities my application require?
    It depends on the API you are using. May i know what type of application you are developing?
    And have you tried with installing simple "HelloWorld GUI" application?
    On which phone are you installing the .sis file?

    Quote Originally Posted by Zero 6630 View Post
    yeah in fact I gone through this link, and I hope to give me the solution Step-4 exactly.
    for solution this problem.
    In step-4 you need to add the IMEI number of your device. You would get IMEI number by using *#06# code on your device. Write down that IMEI number in step-4 of DevCertRequestTool.
    And add necessary capabilities by selecting them and press "ADD" button.

    Kiran.

  9. #9
    Regular Contributor
    Join Date
    Sep 2006
    Posts
    185

    Lightbulb The Solution!

    Hey Kiran I found the idea! look there... it's result that mistake I have:
    Code:
    Package Name: Zero
    Vendor Name: Zero 6630
    Package UID: 0x20006FDF
    Capabilities: ReadDeviceData, NetworkServices, LocalServices 
    Install Type: Standard Application (SA) 
    
    Signing Status: Signed
    "Signed" means that your SIS file has been through Symbian Signed, or some other equivalent manufacturer signing process (or is signed by a dev cert, which is much the same.) A signed SIS file can make use of capabilities that are not available to a self signed SIS file. 
    
    Note: The process this tool uses to determine a SIS file's signing status is not guaranteed 100% accurate, it may be properly signed, but this tool may detect it as self-signed. 
    
    
    
    Warning: Package UID is also used as a SID!
    One (or more!) of the executables this package contains has the same Secure ID as the package UID. While technically allowed, and commonly done this is a stylistic mistake. The package UID and executables Secure IDs are different things. A SIS file only has one package UID, but may have several executables, each with a unique SID. 
    
    The offending executables are: 
    
    !:\sys\bin\Zero.exe
    This Result By Debugger MySISFileInstall.com

    please read The Warning Message then clear for me what the mistake I have, then tell me what I do after..Ok!

    Thanks.
    Last edited by Zero 6630; 2007-08-10 at 10:02.

  10. #10
    Registered User
    Join Date
    Oct 2006
    Location
    Berlin
    Posts
    201

    Re: Certificate Error!

    Package UID is also used as a SID! ?

    UID = SID in the projectproperties?
    (UID 3)= (Secure ID)

  11. #11
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,344

    Re: The Solution!

    Quote Originally Posted by Zero 6630 View Post
    Hey Kiran I found the idea! look there... it's result that mistake I have:
    Post your .pkg file and .mmp file entires here.

    Kiran.

  12. #12
    Regular Contributor
    Join Date
    Sep 2006
    Posts
    185

    Thumbs up Re: The Solution!

    Hi,
    finally I solves my problem!
    and thanks for Site "MySISFileInstall.com" that Clarified the method for my problem.

    Look for final result and details:
    Code:
    Scan Complete: No Errors/Warnings encountered
    Congratulations, it appears your SIS file contains no errors or stylistic problems that this tool can detect. Of course, since this isn't a real phone, that doesn't mean your SIS file will actuall install, but it has a pretty good chance as far we can tell.

  13. #13
    Regular Contributor
    Join Date
    Sep 2006
    Posts
    185

    Re: The Solution!

    Hi,

    I have some other application has showing for me that message again!!!
    Required application access not granted
    Please help how i can signing any application without error? and by used the UID Protected & Unprotected. by the way Q: Why I cannot use The UID Protected?

  14. #14
    Super Contributor
    Join Date
    Oct 2005
    Posts
    739

    Re: The Solution!

    Quote Originally Posted by Zero 6630 View Post
    Hi,

    I have some other application has showing for me that message again!!!


    Please help how i can signing any application without error? and by used the UID Protected & Unprotected. by the way Q: Why I cannot use The UID Protected?
    You will get more information about signing and why we ned signing from
    http://forum.nokia.com/info/sw.nokia..._0_en.pdf.html and
    www.symbiansigned.com The protected UIDs are reserverd for symbian signed.

    regards,
    Peter

  15. #15
    Registered User
    Join Date
    Oct 2006
    Location
    Berlin
    Posts
    201

    Re: Certificate Error!


Similar Threads

  1. XMl Parser Implementation for Symbian
    By ittiam in forum Symbian
    Replies: 26
    Last Post: 2009-09-16, 05:26
  2. Error with makesis.exe and creating the .pkg file
    By gramya87 in forum Symbian Tools & SDKs
    Replies: 7
    Last Post: 2007-10-10, 13:53
  3. carbide build problem help please
    By berkcekisbas in forum Carbide.c++ IDE and plug-ins (Closed)
    Replies: 1
    Last Post: 2006-09-26, 19:41
  4. User break point error in Grid
    By ag24master in forum Symbian User Interface
    Replies: 0
    Last Post: 2003-08-07, 08:20
  5. Unresolved external symbols problem
    By georgica1979 in forum Symbian User Interface
    Replies: 1
    Last Post: 2003-04-06, 13:26

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×