×

Discussion Board

Page 1 of 6 123456 LastLast
Results 1 to 15 of 79

Hybrid View

  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    2

    SMS BASED APPLICATION DEVELOPMENT

    Hi, I am extremely new to this technology. I wish to create an application using VB which can automatically receive sms and after processing the received sms details could send out the information back to the sender. I already have the Processing bit covered out but would like to know what tools do i need to read SMS from a connected mobile. and send sms from it.
    Thanks

  2. #2
    Nokia Developer Expert
    Join Date
    Mar 2003
    Location
    Tampere / Finland
    Posts
    1,839

    RE: SMS BASED APPLICATION DEVELOPMENT

    Hi!

    Please, read the PC Connectivity SDK documentation for more details.

    Teemu / Forum Nokia

  3. #3
    Registered User
    Join Date
    Mar 2003
    Posts
    30

    RE: SMS BASED APPLICATION DEVELOPMENT

    I'm not into VB programming, but if VB can access the serial port, then sending / receiving SMS from mobile attached to serial port can be a simple matter of sending / receiving AT commands on the serial port. There's a doc on the AT command-set somewhere in Forum Nokia.

  4. #4
    Registered User
    Join Date
    Mar 2003
    Posts
    2

    RE: SMS BASED APPLICATION DEVELOPMENT

    I am also interested in doing the same thing, but I am using a Nokia D211 card and apparently the AT command set does not work for this card - is there a way to get around this or to be able to read the SMSs straight into an application like that, only I couldnt seem to get the SDK to help me much unfortunately.

    Has anyone else posted a similar question, or what experience have you have using this?

    Any help is very much appreciated.

    Sparky.

  5. #5
    Registered User
    Join Date
    Mar 2003
    Posts
    9

    RE: SMS BASED APPLICATION DEVELOPMENT

    You should use rs232 to do this.if your gsm modem or mobile phone support AT commands
    MSComm1.CommPort = 1
    MSComm1.Settings = "9600,N,8,1"
    MSComm1.PortOpen = True
    MSComm1.Output = "AT+CMGR=1" & Chr$(13)
    This reads your first sms in your inbox in PDU format.
    This code changes depending on serial port you connect your phone.I hope I could help you.

  6. #6
    Registered User
    Join Date
    Mar 2003
    Posts
    1

    RE: SMS BASED APPLICATION DEVELOPMENT

    Hi! Try downloading the 2.1 SDK for earlier models. There are sample programs included. Just pick up bits and pieces from the samples and put them together. I have made one that fits your description. If you are still having problems let me know and I will send you the working code I made in VB6.

  7. #7
    Registered User
    Join Date
    Mar 2003
    Posts
    2

    RE: SMS BASED APPLICATION DEVELOPMENT

    Thanks a lot guys. I have been able to develop the system easily. If anyone is interested in the code than pls contact me and i will forward the details to you.
    I achieved it using the PC Connectivity Kit but what if I would like to distribute this app. My questions are
    1. How do I distribute this app within my organisation
    2. How can the same thing be achieved by using AT Commands
    3. Would anyone like to join me to develop an ActiveX control which can work by using AT commands for any mobile which will be available via the net as freeware.
    Thanks
    Shuklaji

  8. #8
    Registered User
    Join Date
    Jan 2007
    Posts
    11

    Re: SMS BASED APPLICATION DEVELOPMENT

    dear Shuklaji and frankpaullin

    i really need your help, coz i'm also developing a similiar application , and i stuck in the middle of no where without guidance..

    could i have a copy of the working sample codes?
    my email is lefinale05@yahoo.com
    thanks a lot..

  9. #9
    Registered User
    Join Date
    Mar 2003
    Posts
    2

    RE: SMS BASED APPLICATION DEVELOPMENT

    Hi Shuklaji,
    may you please mail to me your email?
    Kind regards Hoirkman
    hoirkman.szehsszt@gmx.de

  10. #10
    Registered User
    Join Date
    Mar 2003
    Posts
    2

    RE: SMS BASED APPLICATION DEVELOPMENT

    Hi Shuklaji,
    may you please mail to me your email?
    Kind regards Hoirkman
    hoirkman.szehsszt@gmx.de

  11. #11
    Registered User
    Join Date
    Mar 2003
    Posts
    3

    RE: SMS BASED APPLICATION DEVELOPMENT

    Hai Shukalji,
    Iam new to this network and iam working as Software Web Application Developer . Right now i have got a new requirement , where i have to send SMS messages to mobile devices . Right now Iam working on VB6.0,ASP,COM/DCOM,XML etc and i don't know how to proceed . Can u please tell me how should i proceed for sending SMS to cell phones using VB6. If u give me some sample Code it will be very helpful to me as i have to finish the feature in another 1 week .

    my email address is : contactabilash@yahoo.co.in

    thanxs , Abilash

  12. #12
    Regular Contributor
    Join Date
    Aug 2005
    Posts
    210

    Re: SMS BASED APPLICATION DEVELOPMENT

    for vb6 developer look at my code at
    http://cmansstudios.8m.com[follow opensource link]

  13. #13
    Registered User
    Join Date
    Mar 2006
    Posts
    2

    Re: SMS BASED APPLICATION DEVELOPMENT

    Hi friends!

    I need a intall file: ActiveXperts version: 3.2 to do Graduation paper
    If you have it please send to: duc08082000@yahoo.com

    thank you very much!

  14. #14
    Registered User
    Join Date
    Apr 2006
    Posts
    22

    Re: SMS BASED APPLICATION DEVELOPMENT

    Hey I found an interesting Product in The following site
    www.sunsilica.com
    You can try Business Messaging, I'm using it. working Fine. simple APIs.
    Hope it may help you.

    Thank you
    V V RAJU

  15. #15
    Regular Contributor
    Join Date
    Aug 2005
    Posts
    210

    Re: SMS BASED APPLICATION DEVELOPMENT

    Quote Originally Posted by vvraju
    Hey I found an interesting Product in The following site
    www.sunsilica.com
    You can try Business Messaging, I'm using it. working Fine. simple APIs.
    Hope it may help you.

    Thank you
    V V RAJU
    i couldnt see the download link how u downloaded

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×