×

Discussion Board

Results 1 to 4 of 4
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    3

    RE: Nokia30 and SMS receiving...

    Hi,

    The most simpliest way to read the received SMS messages with Nokia 30 terminal is to use HyperTerminal program of the windows (this program comes with windows operating system) or use program like SMSenabler.

    1) Use standard modem driver of the windows or install modem driver of the nokia 30 terminal (you can read information about modem use download the modem driver from:
    http://www.forum.nokia.com/main/1,35452,1_70,00.html
    and choose:
    "Nokia M2M Products"
    "Nokia 30 GSM Connectivity Terminal"
    Choose "Nokia 30 GSM Connectivity Terminal User's Guide for Modem Use" document and if you want to download the Nokia 30 modem driver,
    then go to the part "Software Downloads" and download the newest modem driver.

    2) Open hyperTerminal program and use standard modem driver or Nokia30 modem driver with it.

    3) write at+cmgf=1 to use text mode with SMS

    4) Use at+cmgr or at+cmgl commands to read the received SMS messages


    br,

    M2M developer support team

  2. #2
    Registered User
    Join Date
    Mar 2003
    Posts
    10

    RE: Nokia30 and SMS receiving...

    Hello.

    I have the M31 and I assume they are similar in recv. mode.

    I use a RS-232 terminal, and have the option AT+CNMI set to:
    AT+CNMI=1,2,2,1,0 that way as soon as it recieves a msg it echos back to the DTE.

  3. #3
    Registered User
    Join Date
    Mar 2003
    Posts
    1

    Nokia30 and SMS receiving...

    Maybe it is not question for this site, but anyway...

    Is it possible to receive SMS messages from Nokia30 to PC, without any "hard-to-use AT command lines" and USD 50,- worth additional software?

  4. #4
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    439

    RE: Nokia30 and SMS receiving...

    Hi,

    The Nokia30 terminal is capable of receiving SMS messages,
    but you need to have some program to able to read them.

    The program can be HyperTerminal or some kind of corresponding terminal if you are using AT commands.

    You can also use Nokia 30 terminal in M2M mode and use SMS messages
    with it. In this case you need to have Nokia M2M gateway trial version or real M2M gateway.


    You can found more information about the trial version of the M2M gateway
    from the following links:
    http://www.forum.nokia.com/main/1,35452,1_70,00.html

    Go there and choose "Order Nokia M2M Application development tools " to order
    Nokia M2M application development tools.
    You need to have Two Nokia30 terminals, evaluation module and ADK software
    to be able to get to know Nokia M2M application development.

    From the same page (http://www.forum.nokia.com/main/1,35452,1_70,00.html)
    you can choose "Application Development" to find a lot of documentation
    about the software developing and also you can download "the ADK software"

    BR,

    M2M developer support team

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×