×

Discussion Board

Results 1 to 5 of 5
  1. #1
    Registered User
    Join Date
    Nov 2007
    Posts
    3

    Nokia S40 3rd should support DS Server-OTA-Alert: HOW?

    I've read in the 'Series_40_Platform_FAQ_v3_2_en-1.pdf' paper that Nokia S40 3rd edition should support server synchronization alert by OTA:

    3.6 Which synchronization technologies does the Series 40 platform support?
    From Series 40 3rd Edition onward, the Series 40 platform supports Open Mobile Alliance Data
    Synchronization (OMA DS) version 1.1.2, which provides a set of universal protocols for data
    synchronization. In addition, the ability to initiate synchronization over the air (OTA) from server-
    based alerts has been added
    .


    I've been able to initialize server sync for Nokia S60 but fail to do the same for Nokia S40 3rd edition.
    I send the following and always get 'File.txt' received in response (no sync initialization). I'm testing with Nokia-6085 (S40 3rd)

    X-Wap-Application-Id = 0x05
    Mime-Type: 'application/vnd.syncml+wbxml' (according to spec)
    also tried all these:
    'application/vnd.nokia.syncset+wbxml'
    'application/vnd.syncml.ds.notification' (OK with S60)
    'application/vnd.syncml.notification' (OK with S60)
    'application/vnd.wap.connectivity-wbxml'

    <?xml version="1.0" ?>
    <SyncML>
    <SyncHdr>
    <VerDTD>1.1</VerDTD>
    <VerProto>SyncML/1.1</VerProto>
    <SessionID>1</SessionID>
    <MsgID>1</MsgID>
    <Target>
    <LocURI>/</LocURI>
    </Target>
    <Source>
    <LocURI>http://x.x.x.x</LocURI>
    </Source>
    </SyncHdr>
    <SyncBody>
    <Alert>
    <CmdID>1</CmdID>
    <Data>206</Data>
    <Item>
    <Target>
    <LocURI>card</LocURI>
    </Target>
    <Source>
    <LocURI>vcard</LocURI>
    </Source>
    <Meta>
    <Type>text/x-vcard</Type>
    </Meta>
    </Item>
    </Alert>
    <Final />
    </SyncBody>
    </SyncML>

    I've followed all specs that I could find:
    - syncml_sync_represent_v11_20020215
    - syncml_dm_notification_v11_20020215
    - OMA-TS-SyncML_SAN-V1_2-20070221-A

    What is the right server alert format for Nokia s40 3rd ? Did anyone resolve this issue?

    Any help will be appreciated

    Regards

    Assaf

  2. #2
    Registered User
    Join Date
    Aug 2008
    Location
    Berlin
    Posts
    7

    Re: Nokia S40 3rd should support DS Server-OTA-Alert: HOW?

    I am having the same problem with Nokia S40 5th edition (6500). I get File.txt' received message on the device. Any one got any clue?

  3. #3
    Registered User
    Join Date
    Jul 2008
    Posts
    2

    Re: Nokia S40 3rd should support DS Server-OTA-Alert: HOW?

    I have the same problem,
    I’ve send the xml below to Nokia xpress Music 5320 (s40 5th) , some of the settings were successfully done such as :

    -Setting / sync and backup / server sync /sync settings (account , username , password)
    -Setting / configuration settings /default config setting
    -Setting / configuration settings /preferred access point


    But the DS server setting seems not to be applied.

    -Setting / configuration settings / personal config. setting

    Is empty and no synchronization is defined there (server address and …)

    I’ve tested the same xml on the nokia s60 phones and it worked fine.
    The xml which I had been sent to the phones is:

    <?xml version="1.0" encoding="utf-8" ?>

    <wap-provisioningdoc>
    <characteristic type="BOOTSTRAP">
    <parm name="NAME" value="hype"/>
    </characteristic>
    <characteristic type="NAPDEF">
    <parm name="NAME" value="hype"/>
    <parm name="NAPID" value="hype_NAPID"/>
    <parm name="BEARER" value="GSM-GPRS"/>
    <parm name="NAP-ADDRESS" value="testcell"/>
    <parm name="NAP-ADDRTYPE" value="APN"/>
    <parm name="INTERNET"/>
    </characteristic>
    <characteristic type="APPLICATION">
    <parm name="APPID" value="w5"/>
    <parm name="TO-NAPID" value="hype_NAPID"/>
    <parm name="NAME" value="hype"/>
    <parm name="ADDR" value="http://192.168.0.3:8080/Funambol/ds"/>
    <characteristic type="RESOURCE">
    <parm name="URI" value="ho-scard"/>
    <parm name="NAME" value="Contacts DB"/>
    <parm name="AACCEPT" value="text/x-vcard"/>
    </characteristic>
    <characteristic type="RESOURCE">
    <parm name="URI" value="ho-scal"/>
    <parm name="NAME" value="Calendar DB"/>
    <parm name="AACCEPT" value="text/x-vcalendar"/>
    </characteristic>
    <characteristic type="RESOURCE">
    <parm name="URI" value="ho-snote"/>
    <parm name="NAME" value="Notes DB"/>
    <parm name="AACCEPT" value="text/plain"/>
    </characteristic>
    <characteristic type="APPAUTH">
    <parm name="AAUTHNAME" value="majid "/>
    <parm name="AAUTHSECRET" value="majid"/>
    </characteristic>
    </characteristic>
    </wap-provisioningdoc>

    Bests
    Mahkameh

  4. #4
    Registered User
    Join Date
    Aug 2008
    Location
    Berlin
    Posts
    7

    Re: Nokia S40 3rd should support DS Server-OTA-Alert: HOW?

    I am able to synchronise my contacts - which means my DS settings are correct. But server alert 206 is not working. Any ideas?

  5. #5
    Registered User
    Join Date
    Mar 2003
    Posts
    4,105
    mahkamehk, please let us continue there …

Similar Threads

  1. ###Upgrading Firmware###
    By zahid44 in forum General Development Questions
    Replies: 27
    Last Post: 2008-10-21, 07:17
  2. Replies: 2
    Last Post: 2005-09-09, 09:55
  3. Series 60Series 60 MIDP Concept SDK Beta 0.2 Linux bug?
    By kauppi in forum Mobile Java Tools & SDKs
    Replies: 3
    Last Post: 2003-04-07, 09:05

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×