×

Discussion Board

Page 1 of 2 12 LastLast
Results 1 to 15 of 19
  1. #1
    Registered User
    Join Date
    Jul 2008
    Posts
    2

    Error "missing separator. Stop."

    When I tried to build hellowolrdbasic program (with "abld build gcce udep"). I found 2 error:
    -----------------------------------------------------------------
    make -r -f "\S60\devices\S60_3rd_FP2_SDK\EPOC32\BUILD\S60\devices\S60_3rd_FP2_SDK\S60CppExamples\helloworldbasic\group\GCCE.make" LIBRARY
    \S60\devices\S60_3rd_FP2_SDK\EPOC32\BUILD\S60\devices\S60_3rd_FP2_SDK\S60CppExamples\helloworldbasic\group\HELLOWORLDBASIC\GCCE\HELLOWORLDBASIC.GCCE:85: *** missing separator. Stop.
    make: *** [LIBRARYHELLOWORLDBASIC] Error 2
    -----------------------------------------------------------------
    and this
    -----------------------------------------------------------------
    make -r -f "\S60\devices\S60_3rd_FP2_SDK\EPOC32\BUILD\S60\devices\S60_3rd_FP2_SDK\S60CppExamples\helloworldbasic\group\GCCE.make" TARGET CFG=UREL
    \S60\devices\S60_3rd_FP2_SDK\EPOC32\BUILD\S60\devices\S60_3rd_FP2_SDK\S60CppExamples\helloworldbasic\group\HELLOWORLDBASIC\GCCE\HELLOWORLDBASIC.GCCE:85: *** missing separator. Stop.
    make: *** [TARGETHELLOWORLDBASIC] Error 2
    -----------------------------------------------------------------

    I used S60 3rd SDK FP2 and I have patched "C:\Program Files\CSL Arm Toolchain\bin" in my PATH env variable. I worked at XP.

    With this error, I can't make helloworldbasic.exe file and SIS file.

    I really need help for this problem soon. Thank you
    Last edited by john.hexis; 2008-07-12 at 05:16.

  2. #2
    Registered User
    Join Date
    Nov 2007
    Posts
    444

    Re: Error "missing separator. Stop."

    What is your project path?
    Specify the path starting from drive letter to project dir(C:\... | D:\...)

    Regards,
    Kavit.

  3. #3
    Registered User
    Join Date
    Jul 2008
    Posts
    2

    Re: Error "missing separator. Stop."

    I work in (C:\S60\devices\S60_3rd_FP2_SDK\).

  4. #4
    Registered User
    Join Date
    Nov 2007
    Posts
    444

    Re: Error "missing separator. Stop."

    Ok sorry then no problem with your path.

  5. #5
    Super Contributor
    Join Date
    Mar 2004
    Location
    Singapore
    Posts
    9,968

    Re: Error "missing separator. Stop."

    Quote Originally Posted by john.hexis View Post
    When I tried to build hellowolrdbasic program (with "abld build gcce udep"). I found 2 error:
    -----------------------------------------------------------------
    make -r -f "\S60\devices\S60_3rd_FP2_SDK\EPOC32\BUILD\S60\devices\S60_3rd_FP2_SDK\S60CppExamples\helloworldbasic\group\GCCE.make" LIBRARY
    \S60\devices\S60_3rd_FP2_SDK\EPOC32\BUILD\S60\devices\S60_3rd_FP2_SDK\S60CppExamples\helloworldbasic\group\HELLOWORLDBASIC\GCCE\HELLOWORLDBASIC.GCCE:85: *** missing separator. Stop.
    make: *** [LIBRARYHELLOWORLDBASIC] Error 2
    -----------------------------------------------------------------
    and this
    -----------------------------------------------------------------
    make -r -f "\S60\devices\S60_3rd_FP2_SDK\EPOC32\BUILD\S60\devices\S60_3rd_FP2_SDK\S60CppExamples\helloworldbasic\group\GCCE.make" TARGET CFG=UREL
    \S60\devices\S60_3rd_FP2_SDK\EPOC32\BUILD\S60\devices\S60_3rd_FP2_SDK\S60CppExamples\helloworldbasic\group\HELLOWORLDBASIC\GCCE\HELLOWORLDBASIC.GCCE:85: *** missing separator. Stop.
    make: *** [TARGETHELLOWORLDBASIC] Error 2
    -----------------------------------------------------------------

    I used S60 3rd SDK FP2 and I have patched "C:\Program Files\CSL Arm Toolchain\bin" in my PATH env variable. I worked at XP.

    With this error, I can't make helloworldbasic.exe file and SIS file.

    I really need help for this problem soon. Thank you
    You are trying to use VISTA which has known problem with Symbian.C++ development environment. You have to follow links in wiki.

  6. #6
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,347

    Smile Re: Error "missing separator. Stop."

    Quote Originally Posted by john.hexis View Post
    When I tried to build hellowolrdbasic program (with "abld build gcce udep"). I found 2 error:
    -----------------------------------------------------------------
    ......
    I used S60 3rd SDK FP2 and I have patched "C:\Program Files\CSL Arm Toolchain\bin" in my PATH env variable. I worked at XP.

    ...
    Search for "missing separator" on this forums. This has been discussed many times.

    Kiran.
    Nokia Developer Wiki Moderation team

  7. #7
    Nokia Developer Champion
    Join Date
    May 2004
    Posts
    2,267

    Re: Error "missing separator. Stop."

    \devices\S60_3rd_FP2_SDK\S60CppExamples\helloworldbasic\group\HELLOWORLDBASIC\GCCE\HELLOWORLDBASIC.GCCE:85: *** missing separator. Stop.
    make: *** [TARGETHELLOWORLDBASIC] Error 2
    Hi,

    I had the same problem and resolved it by deleting the .gcce file and then rebuild the project.

    Regards

    Ziteng Chen

  8. #8
    Registered User
    Join Date
    Mar 2009
    Posts
    12

    Re: Error "missing separator. Stop."

    WHat was the solution?

    I have the same problem. I have Windows XP and I added the patch.

    The error es the following:


    ***Building project "HelloWorld" for configuration "Phone Release (GCCE) [UIQ3]"

    ***Printing environment variables modified from default:
    PATH=C:\Symbian\UIQ3SDK\epoc32\tools;C:\Symbian\UIQ3SDK\epoc32\gcc\bin;C:/Archivos de programa/Nokia/Carbide.c++ v2.0/jre/bin/client;C:/Archivos de programa/Nokia/Carbide.c++ v2.0/jre/bin;C:\Archivos de programa\Archivos comunes\Symbian\tools;C:\Perl\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\VoiceAge\Common;C:\Archivos de programa\Archivos comunes\Teleca Shared;C:\Archivos de programa\Intuwave\Shared\mRouterRuntime;C:\Symbian\UIQ3SDK\epoc32\tools\nokia_compiler\Symbian_Tools\Command_Line_Tools
    PATH=C:\Symbian\UIQ3SDK\epoc32\tools;C:\Symbian\UIQ3SDK\epoc32\gcc\bin;C:/Archivos de programa/Nokia/Carbide.c++ v2.0/jre/bin/client;C:/Archivos de programa/Nokia/Carbide.c++ v2.0/jre/bin;C:\Archivos de programa\Archivos comunes\Symbian\tools;C:\Perl\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\VoiceAge\Common;C:\Archivos de programa\Archivos comunes\Teleca Shared;C:\Archivos de programa\Intuwave\Shared\mRouterRuntime;C:\Symbian\UIQ3SDK\epoc32\tools\nokia_compiler\Symbian_Tools\Command_Line_Tools
    EPOCROOT=\Symbian\UIQ3SDK\
    NO_DEPENDENCIES=-nd
    MAKE=make -j 4

    Working Directory: C:/Symbian/UIQ3SDK/Examples/UIQ/QHelloWorld/Group

    ***Makefile structures up to date. Skipping 'bldmake bldfiles'

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ export
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\EXPORT.make" EXPORT VERBOSE=-s
    Nothing to do

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ library gcce
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\GCCE.make" LIBRARY VERBOSE=-s
    \Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE:85: *** missing separator. Stop.
    make: *** [LIBRARYHELLOWORLD] Error 2
    make -s -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE" LIBRARY

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ resource gcce urel
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\GCCE.make" RESOURCE CFG=UREL VERBOSE=-s
    \Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE:85: *** missing separator. Stop.
    make -s -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE" RESOURCEUREL
    make: *** [RESOURCEHELLOWORLD] Error 2

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ target gcce urel
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\GCCE.make" TARGET CFG=UREL VERBOSE=-s
    \Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE:85: *** missing separator. Stop.
    make -j 4 -s -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE" UREL
    make: *** [TARGETHELLOWORLD] Error 2

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ final gcce urel
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\GCCE.make" FINAL CFG=UREL VERBOSE=-s

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ test export
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\EXPORTtest.make" EXPORT VERBOSE=-s
    Nothing to do

    Total Time: 0 sec

    ***Errors were detected in build. See the Problems or Console view for details.

    Total Time: 0 sec


    Any help please?
    Last edited by JoanC; 2009-03-16 at 18:17.

  9. #9
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,347

    Smile Re: Error "missing separator. Stop."

    Quote Originally Posted by JoanC View Post
    ***Building project "HelloWorld" for configuration "Phone Release (GCCE) [UIQ3]"
    I cannot find any entry for CSL ARM Toolchain in your path. I think that you have not installed CSL ARM Toolchain. You can install it from:

    Code:
    Start -> Programs -> CSL ARM Toolchain....
    I hope that helps.
    Nokia Developer Wiki Moderation team

  10. #10
    Registered User
    Join Date
    Mar 2009
    Posts
    12

    Re: Error "missing separator. Stop."

    ok. I had changed the path txt file in C:\Symbian\UIQ3SDK. But, now I have changed the PATH environment from carbide (clicking rigth on the HelloWorld, properties, Carbide.c++, Buid Configurations, Environment Tab).

    When I clean the project and buid again the error continue:




    ***Building project "HelloWorld" for configuration "Phone Release (GCCE) [UIQ3]"

    ***Printing environment variables modified from default:
    PATH=C:\Symbian\UIQ3SDK\epoc32\tools;C:\Symbian\UIQ3SDK\epoc32\gcc\bin;C:\Symbian\UIQ3SDK\epoc32\tools;C:\Symbian\UIQ3SDK\epoc32\gcc\bin;C:/Archivos de programa/Nokia/Carbide.c++ v2.0/jre/bin/client;C:/Archivos de programa/Nokia/Carbide.c++ v2.0/jre/bin;C:\Archivos de programa\Archivos comunes\Symbian\tools;C:\Perl\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\VoiceAge\Common;C:\Archivos de programa\Archivos comunes\Teleca Shared;C:\Archivos de programa\Intuwave\Shared\mRouterRuntime;C:\Symbian\UIQ3SDK\epoc32\tools\nokia_compiler\Symbian_Tools\Command_Line_Tools;C:\Archivos de programa\CSL Arm Toolchain\bin
    PATH=C:\Symbian\UIQ3SDK\epoc32\tools;C:\Symbian\UIQ3SDK\epoc32\gcc\bin;C:/Archivos de programa/Nokia/Carbide.c++ v2.0/jre/bin/client;C:/Archivos de programa/Nokia/Carbide.c++ v2.0/jre/bin;C:\Archivos de programa\Archivos comunes\Symbian\tools;C:\Perl\bin\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Archivos de programa\VoiceAge\Common;C:\Archivos de programa\Archivos comunes\Teleca Shared;C:\Archivos de programa\Intuwave\Shared\mRouterRuntime;C:\Symbian\UIQ3SDK\epoc32\tools\nokia_compiler\Symbian_Tools\Command_Line_Tools
    EPOCROOT=\Symbian\UIQ3SDK\
    NO_DEPENDENCIES=-nd
    MAKE=make -j 4

    Working Directory: C:/Symbian/UIQ3SDK/Examples/UIQ/QHelloWorld/Group

    ***Makefile structures up to date. Skipping 'bldmake bldfiles'

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ export
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\EXPORT.make" EXPORT VERBOSE=-s
    Nothing to do

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ library gcce
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\GCCE.make" LIBRARY VERBOSE=-s
    make -s -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE" LIBRARY
    \Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE:85: *** missing separator. Stop.
    make: *** [LIBRARYHELLOWORLD] Error 2

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ resource gcce urel
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\GCCE.make" RESOURCE CFG=UREL VERBOSE=-s
    \Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE:85: *** missing separator. Stop.
    make -s -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE" RESOURCEUREL
    make: *** [RESOURCEHELLOWORLD] Error 2

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ target gcce urel
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\GCCE.make" TARGET CFG=UREL VERBOSE=-s
    \Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE:85: *** missing separator. Stop.
    make -j 4 -s -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\HELLOWORLD\GCCE\HELLOWORLD.GCCE" UREL
    make: *** [TARGETHELLOWORLD] Error 2

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ final gcce urel
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\GCCE.make" FINAL CFG=UREL VERBOSE=-s

    Total Time: 0 sec

    ***Invoking abld command
    perl.exe -S ABLD.PL \Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\ test export
    make -r -f "\Symbian\UIQ3SDK\EPOC32\BUILD\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld\Group\EXPORTtest.make" EXPORT VERBOSE=-s
    Nothing to do

    Total Time: 0 sec

    ***Errors were detected in build. See the Problems or Console view for details.

    Total Time: 0 sec


    What can I do?

    Thanks in advance for your help!

  11. #11
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,347

    Re: Error "missing separator. Stop."

    Which version of perl you have installed? Type perl -v on command prompt and see what is the version of perl.
    Nokia Developer Wiki Moderation team

  12. #12
    Registered User
    Join Date
    Mar 2009
    Posts
    12

    Re: Error "missing separator. Stop."

    v. 5.6.1

    Is it the problem?

  13. #13
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,347

    Re: Error "missing separator. Stop."

    Quote Originally Posted by JoanC View Post
    v. 5.6.1

    Is it the problem?
    There should be a build number also.... However you have not given full details, it seems to be the right version. Can you try with creating a complete new GUI project from Carbide.c++ and build for Phone Release(GCCE UREL) ?

    PS: Also type PATH on command prompt and list the content here. Just want to make sure...
    Nokia Developer Wiki Moderation team

  14. #14
    Registered User
    Join Date
    Mar 2009
    Posts
    12

    Re: Error "missing separator. Stop."

    C:\Symbian\UIQ3SDK\Examples\UIQ\QHelloWorld>perl -v

    This is perl, v5.6.1 built for MSWin32-x86-multi-thread
    (with 1 registered patch, see perl -V for more detail)

    Copyright 1987-2001, Larry Wall

    Binary build 635 provided by ActiveState Corp. http://www.ActiveState.com
    Built 15:34:21 Feb 4 2003


    Perl may be copied only under the terms of either the Artistic License or the
    GNU General Public License, which may be found in the Perl 5 source kit.

    Complete documentation for Perl, including FAQ lists, should be found on
    this system using `man perl' or `perldoc perl'. If you have access to the
    Internet, point your browser at http://www.perl.com/, the Perl Home Page.


    When I type path, it shows me a path different to the one set with the method explained in the before message.
    How could I set the path from the command line?


    Thanks you so much!!

    JoanC

  15. #15
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,347

    Re: Error "missing separator. Stop."

    Quote Originally Posted by JoanC View Post
    When I type path, it shows me a path different to the one set with the method explained in the before message.
    How could I set the path from the command line?


    Thanks you so much!!

    JoanC
    From your computer:
    Control Panel -> System -> Advanced -> Environment Variables -> System variables -> Path...
    Nokia Developer Wiki Moderation team

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×