×

Discussion Board

Results 1 to 8 of 8
  1. #1
    Regular Contributor
    Join Date
    Nov 2006
    Posts
    71

    Angry Not found Mif & BMP

    When I build my project using 3rd_FP1 I get the following errors:

    Error 1
    ERROR: File not found: 2\Symbian\9.2\S60_3rd_FP1\epoc32\release\WINSCW\UDEB\Z\resource\apps\MyProject.mif


    Note: I have defined the following file MyProject.mifdef along with other project files, it contains the following line:
    c32,8|gfx\qgn_menu_MyProject.svg

    Error 2
    make[1]: *** No rule to make target `\Symbian\9.2\S60_3rd_FP1\EPOC32\RELEASE\WINSCW\UDEB\inetproutil.lib', needed by `\Symbian\9.2\S60_3rd_FP1\EPOC32\RELEASE\WINSCW\UDEB\MyProject.exe'. Stop.

    Note: the inetproutil library is already included in the mmp file

    When I build my application using 3rd I get this error
    Error 1
    ERROR: File not found \Symbian\9.1\S60_3rd\epoc32\release\WINSCW\UDEB\Z\resource\apps\GPSMonitor.bmp


    In addition to that I get the same second error

    How to tackle and resolve these problems? (I have searched a lot for solutions and until now I was not able to fix it!)

    FYI:
    Carbide v1.2 & v1.3
    SDKs 3rd, 3rd_MR, 3rd_FP1

  2. #2
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,674

    Re: Not found Mif & BMP

    Some things seem to be typo-issues:
    - the "2" in 2\Symbian\... looks suspicious, since that "2" does not appear in any other message
    - inetproutil.lib really does not exist, it should be inetprotutil
    - the 3rd error is probably correct too, you can simply visit that directory, and there are high chances that it does not have GPSMonitor.bmp - though I have never seen a build process complaining about missing image files from a target folder, your project must be a strange one.

  3. #3
    Registered User
    Join Date
    Dec 2005
    Posts
    1,236

    Re: Not found Mif & BMP

    Hi,
    If your problem is not resolved yet could you share your .mmp and .mk to better understand your situation and pin point the problem.

    Thanks and Regards,
    Sriky

  4. #4
    Regular Contributor
    Join Date
    Nov 2006
    Posts
    71

    Re: Not found Mif & BMP

    I have removed the invalid inetproutil library entry from the mmp file it removed the second error but still when I'm building my application I receive error 1

    When building using sdk 3rdEd -> bmp file not found !!
    When building using sdk 3rdEd_FP1 -> mif file not found !!

    This is the content of the mmp file
    Code:
    TARGET            MyProject.exe
    TARGETTYPE        exe
    UID		  0x0     0x20010FEC 
    
    SOURCEPATH        ..\src
    SOURCE            MyProject.cpp
    SOURCE            MyProjectApplication.cpp
    SOURCE            MyProjectAppUi.cpp
    SOURCE            MyProjectDocument.cpp
    
    SOURCEPATH        ..\data
    START RESOURCE    MyProject.rss
    HEADER
    TARGETPATH resource\apps
    END //RESOURCE
    
    START RESOURCE    MyProject_reg.rss
    TARGETPATH 	      \private\10003a3f\apps
    END //RESOURCE
    
    START RESOURCE    ..\data\20010FEC.rss
    TARGETPATH        \private\101f875a\import
    HEADER
    END
    
    USERINCLUDE       ..\inc
    
    SYSTEMINCLUDE     \epoc32\include \epoc32\include\variant \epoc32\include\oem \epoc32\include\ecom ..
    
    LIBRARY           euser.lib
    LIBRARY			  ws32.lib
    LIBRARY			  apgrfx.lib
    LIBRARY			  ecom.lib
    LIBRARY			  commdb.lib
    LIBRARY			  http.lib
    LIBRARY			  satinfo.lib
    LIBRARY			  apparc.lib
    LIBRARY			  cone.lib
    LIBRARY			  eikcore.lib
    LIBRARY			  avkon.lib
    LIBRARY			  commonengine.lib
    LiBRARY			  etel3rdparty.lib
    LIBRARY			  efsrv.lib
    LIBRARY			  estor.lib
    LIBRARY			  aknskinsrv.lib
    LIBRARY			  aknskins.lib
    LIBRARY			  lbs.lib
    LIBRARY			  bafl.lib
    LIBRARY			  eikcoctl.lib
    LIBRARY			  eikdlg.lib
    LIBRARY			  eikctl.lib
    LIBRARY			  fbscli.lib
    LIBRARY			  aknicon.lib
    LIBRARY			  aknnotify.lib
    LIBRARY			  etext.lib
    LIBRARY			  gdi.lib
    LIBRARY			  egul.lib
    LIBRARY			  edbms.lib
    LIBRARY			  insock.lib
    LIBRARY			  inetproutil.lib
    LIBRARY			  http.lib
    LIBRARY			  esock.lib commonui.lib apmime.lib sysutil.lib hlplch.lib inetprotutil.lib
    
    LANG SC 01
    EPOCSTACKSIZE 	  0x14000
    EPOCHEAPSIZE      0x5000 0x800000
    VENDORID	  	  0
    SECUREID	      0x20010FEC
    CAPABILITY	  	  LOCATION NETWORKSERVICES READUSERDATA
    // End of File
    START BITMAP MyProject_mbm.mbm
    	HEADER
    	SOURCEPATH ..\Bitmaps
    	SOURCE c24 MainScreen.bmp
    	SOURCE 8 MainScreenMask.bmp
    	SOURCE c24 GPSInactive.bmp
    	SOURCE 8 GPSInactiveMask.bmp
    	SOURCE c24 GPSLookup.bmp
    	SOURCE 8 GPSLookupMask.bmp
    	SOURCE c24 SpeedUp.bmp
    	SOURCE 8 SpeedUpMask.bmp
    	SOURCE c24 SpeedDown.bmp
    	SOURCE 8 SpeedDownMask.bmp
    	SOURCE c24 NorthNeedle.bmp
    	SOURCE 8 NorthNeedleMask.bmp
    	SOURCE c24 SouthNeedle.bmp
    	SOURCE 8 SouthNeedleMask.bmp
    	SOURCE c24 EastNeedle.bmp
    	SOURCE 8 EastNeedleMask.bmp
    	SOURCE c24 WestNeedle.bmp
    	SOURCE 8 WestNeedleMask.bmp
    	SOURCE c24 SouthWestNeedle.bmp
    	SOURCE 8 SouthWestNeedleMask.bmp
    	SOURCE c24 SouthEastNeedle.bmp
    	SOURCE 8 SouthEastNeedleMask.bmp
    	SOURCE c24 NorthWestNeedle.bmp
    	SOURCE 8 NorthWestNeedleMask.bmp
    	SOURCE c24 NorthEastNeedle.bmp
    	SOURCE 8 NorthEastNeedleMask.bmp
    	SOURCE c24 GPSActive.bmp
    	SOURCE 8 GPSActiveMask.bmp
    	TARGETPATH resource\apps
    END
    START BITMAP MyProject_352x416.mbm
    	HEADER
    	SOURCEPATH ..\Bitmaps(352x416)
    	SOURCE c24,1 MainScreen.bmp MainScreenMask.bmp EastNeedle.bmp EastNeedleMask.bmp WestNeedle.bmp WestNeedleMask.bmp SouthNeedle.bmp SouthNeedleMask.bmp NorthNeedle.bmp NorthNeedleMask.bmp SouthWestNeedle.bmp SouthWestNeedleMask.bmp SouthEastNeedle.bmp SouthEastNeedleMask.bmp NorthWestNeedle.bmp NorthWestNeedleMask.bmp NorthEastNeedle.bmp NorthEastNeedleMask.bmp
    	TARGETPATH resource\apps
    END
    START BITMAP MyProject_320x240_mbm.mbm
    	HEADER
    	SOURCEPATH ..\Bitmaps(320x240)
    	SOURCE c24,1 MainScreen.bmp MainScreenMask.bmp WestNeedle.bmp WestNeedleMask.bmp SouthNeedle.bmp SouthNeedleMask.bmp NorthNeedle.bmp NorthNeedleMask.bmp EastNeedle.bmp EastNeedleMask.bmp SouthWestNeedle.bmp SouthWestNeedleMask.bmp SouthEastNeedle.bmp SouthEastNeedleMask.bmp NorthWestNeedle.bmp NorthWestNeedleMask.bmp NorthEastNeedle.bmp NorthEastNeedleMask.bmp GPSLookup.bmp GPSLookupMask.bmp GPSActive.bmp GPSActiveMask.bmp GPSInactive.bmp GPSInactiveMask.bmp SpeedDown.bmp SpeedDownMask.bmp SpeedUp.bmp SpeedUpMask.bmp
    	TARGETPATH resource\apps
    END
    START BITMAP MyProject_240x320_mbm.mbm
    	HEADER
    	SOURCEPATH ..\Bitmaps(240x320)
    	SOURCE c24,1 MainScreen.bmp MainScreenMask.bmp MainScreen2.bmp MainScreenMask2.bmp GPSLookup.bmp GPSLookupMask.bmp GPSInactive.bmp GPSInactiveMask.bmp GPSActive.bmp GPSActiveMask.bmp WestNeedle.bmp WestNeedleMask.bmp SouthNeedle.bmp SouthNeedleMask.bmp NorthNeedle.bmp NorthNeedleMask.bmp EastNeedle.bmp EastNeedleMask.bmp SouthWestNeedle.bmp SouthWestNeedleMask.bmp SouthEastNeedle.bmp SouthEastNeedleMask.bmp NorthWestNeedle.bmp NorthWestNeedleMask.bmp NorthEastNeedle.bmp NorthEastNeedleMask.bmp SpeedDown.bmp SpeedDownMask.bmp SpeedUp.bmp SpeedUpMask.bmp
    	TARGETPATH resource\apps
    END
    SOURCEPATH ..\src
    SOURCE TimeOutTimer.cpp SettingsDialog.cpp Response.cpp NetworkCellMonitor.cpp IMEI.cpp MyProjectView.cpp MyProjectUtils.cpp MyProjectSettingsItemList.cpp MyProjectSettingsInfo.cpp MyProjectPositionRequestor.cpp MyProjectLogEngine.cpp MyProjectEngine.cpp MyProjectDBMSEngine.cpp MyProjectContainer.cpp MyProjectActivation.cpp GPSGuiControl.cpp GPRSHttpManagerEngine.cpp GPRSController.cpp GPRSConnOpener.cpp CustomEdwin.cpp
    START BITMAP BMP.mbm
    	TARGETPATH resource\apps
    	HEADER
    	SOURCEPATH ..\BitmapImages
    	SOURCE c24,1 MainScreen176x208.bmp MainScreenMask176x208.bmp MainScreen240x320.bmp MainScreenMask240x320.bmp MainScreen320x240.bmp MainScreenMask320x240.bmp GPSInactive176x208.bmp GPSInactiveMask176x208.bmp GPSInactive240x320.bmp GPSInactiveMask240x320.bmp GPSLookup176x208.bmp GPSLookupMask176x208.bmp GPSLookup240x320.bmp GPSLookupMask240x320.bmp GPSActive176x208.bmp GPSActiveMask176x208.bmp GPSActive240x320.bmp GPSActiveMask240x320.bmp NorthNeedle176x208.bmp NorthNeedleMask176x208.bmp NorthNeedle240x320.bmp NorthNeedleMask240x320.bmp SouthNeedle176x208.bmp SouthNeedleMask176x208.bmp SouthNeedle240x320.bmp SouthNeedleMask240x320.bmp WestNeedle176x208.bmp WestNeedleMask176x208.bmp WestNeedle240x320.bmp WestNeedleMask240x320.bmp EastNeedle176x208.bmp EastNeedleMask176x208.bmp EastNeedle240x320.bmp EastNeedleMask240x320.bmp NorthWestNeedle176x208.bmp NorthWestNeedleMask176x208.bmp NorthWestNeedle240x320.bmp NorthWestNeedleMask240x320.bmp SouthWestNeedle176x208.bmp SouthWestNeedleMask176x208.bmp SouthWestNeedle240x320.bmp SouthWestNeedleMask240x320.bmp SouthEastNeedle176x208.bmp SouthEastNeedleMask176x208.bmp SouthEastNeedle240x320.bmp SouthEastNeedleMask240x320.bmp NorthEastNeedle176x208.bmp NorthEastNeedleMask176x208.bmp NorthEastNeedle240x320.bmp NorthEastNeedleMask240x320.bmp SpeedDown176x208.bmp SpeedDownMask176x208.bmp SpeedDown240x320.bmp SpeedDownMask240x320.bmp SpeedUp176x208.bmp SpeedUpMask176x208.bmp SpeedUp240x320.bmp SpeedUpMask240x320.bmp
    END

  5. #5
    Regular Contributor
    Join Date
    Nov 2006
    Posts
    71

    Re: Not found Mif & BMP

    By the way regarding the
    ERROR: File not found: 2\Symbian\9.2\S60_3rd_FP1\epoc32\release\WINSCW\UDEB\Z\resource\apps\MyProject.mif

    I have seen a similar error in the following post also mifconv.exe fails with option /X

    Here is the content of the mk file:
    Code:
    ifeq (WINS,$(findstring WINS, $(PLATFORM)))
    ZDIR=$(EPOCROOT)epoc32\release\$(PLATFORM)\$(CFG)\Z
    else
    ZDIR=$(EPOCROOT)epoc32\data\z
    endif
    
    TARGETDIR=$(ZDIR)\resource\apps
    ICONTARGETFILENAME=$(TARGETDIR)\MyProject.mif
    
    ICONDIR=..\gfx
    
    do_nothing :
    	@rem do_nothing
    
    MAKMAKE : do_nothing
    
    BLD : do_nothing
    
    CLEAN : do_nothing
    
    LIB : do_nothing
    
    CLEANLIB : do_nothing
    
    RESOURCE :	
    	mifconv /X $(ICONTARGETFILENAME) \
    		/c32 $(ICONDIR)\qgn_menu_MyProject.svg
    		
    	mifconv $(ICONTARGETFILENAME)  \
    		 /H$(EPOCROOT)epoc32\include\MyProject.mbg  \
    		 /c32,8 $(ICONDIR)\qgn_menu_MyProject.svg
    FREEZE : do_nothing
    
    SAVESPACE : do_nothing
    
    RELEASABLES :
    	@echo $(ICONTARGETFILENAME) 
    
    FINAL : do_nothing

  6. #6
    Regular Contributor
    Join Date
    Nov 2006
    Posts
    71

    Unhappy Re: Not found Mif & BMP

    I have detected that there was some sort of duplicate creation of mif files so I have removed the first two commands, unfortunatly this was automatically generated by carbide v1.2&v1.3 update tools where it inserted the last 3 lines but it failed to remove the original 2 lines
    Code:
    mifconv /X $(ICONTARGETFILENAME) \
    	/c32 $(ICONDIR)\qgn_menu_MyProject.svg
    		
    mifconv $(ICONTARGETFILENAME)  \
    	 /H$(EPOCROOT)epoc32\include\MyProject.mbg  \
    	 /c32,8 $(ICONDIR)\qgn_menu_MyProject.svg
    Now I'm able to build the application and run it using 3rd_FP1

    On the other hand, when I build using 3rd I get build complete but when I try to run the emulator I get the error Launching "program file doesn't exist"
    This is a copy of the detailed message Program file does not exist
    "C:\Symbian\9.2\S60_3rd_FP1\Epoc32\release\WINSCW\UDEB\GPSMonitor.exe not found"

    I really don't understand why carbide is trying to locate the project exe in the 3rd_FP1 folder while I was building for the 3rd edition. I perform the switch between the sdks using the "Active Build Configuration" Options menu !!!

    NOTE: Before I issue any build commands I perform a cleaning operation on the project
    Last edited by mockba; 2008-09-11 at 07:19.

  7. #7
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,674

    Re: Not found Mif & BMP

    Check the "Run configuration", so what file it tries to execute, and also check if your .exe is really created in epoc32\release\winscw\udeb.

  8. #8
    Regular Contributor
    Join Date
    Nov 2006
    Posts
    71

    Smile Re: Not found Mif & BMP

    Thanks alot managed to fix my problems, had to create a new run launch configuration for the 3rd_Ed build

Similar Threads

  1. 'SVGTBINENCODE.exe' not found
    By bmw330i in forum Symbian Tools & SDKs
    Replies: 14
    Last Post: 2010-01-05, 12:32
  2. Trojan horse in S60 2nd ed FP3 SDK?
    By mrtj in forum Symbian Tools & SDKs
    Replies: 4
    Last Post: 2008-01-15, 12:12
  3. Replies: 2
    Last Post: 2004-11-17, 10:20
  4. 6310 IR Modem.inf not found under W2000
    By Nokia_Archived in forum PC Suite API and PC Connectivity SDK
    Replies: 1
    Last Post: 2002-05-24, 13:21

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×