Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Mar 2003

    AT Command to send SMS in PDU format

    I have tried to send SMS through AT Command to the mobile connected to my COM port through HyperTerminal: "at+cmgs=<length><CR><PDU><Ctrl Z>". But i am not successful in sending through it. I have followed the PDU standards through GSM 03.38 and GSM 03.40. For AT Commands i have followed GSM 07.05.
    Similarly i am not able to write the SMS in the memory of the phone through command: "at+cmgw=<param>...".
    Other commands like listing, reading of SMS are working fine.
    If anybody has successfully been able to send the SMS please help, may be with a working PDU and some example tried by you.

  2. #2
    Nokia Developer Expert
    Join Date
    Mar 2003
    Tampere / Finland

    RE: AT Command to send SMS in PDU format


    PDU examples can be found from Smart Messaging FAQ and also from Card Phone 2.0 OEM manual. OEM manual is available at http://www.forum.nokia.com/cardphoneforum/main/1,35452,1_99_6_30,00.html the document is called "Nokia Card Phone OEM-manual".

    Teemu / Forum Nokia

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts