×

Discussion Board

Page 1 of 2 12 LastLast
Results 1 to 15 of 30
  1. #1
    Regular Contributor
    Join Date
    Aug 2008
    Location
    Zanjan
    Posts
    183

    [moved] Error in create sis file.

    Hi all
    We use MS Visual studio.NET2003 + carbide2 c++ + SDK 2nd,fp3. We built Btdiscovery example selecting solution config: "Deb_S60_23_WINSCW" without problems. But when we select "Release" it does not work and response is "SDK for build configuration Release is not installed.The build will probably fail."
    What problem is here?
    thanks all

  2. #2
    Nokia Developer Moderator
    Join Date
    Sep 2004
    Location
    Tampere, Finland
    Posts
    11,359

    Re: [moved] Error in create sis file.

    You are using Carbide.vs, not Carbide.c++ therefore this is a more appropriate forum for your question.

    Quote Originally Posted by masoud_bayat View Post
    ... We built Btdiscovery example selecting solution config: "Deb_S60_23_WINSCW" without problems. But when we select "Release" it does not work and response is "SDK for build configuration Release is not installed.The build will probably fail."
    What problem is here?
    thanks all
    If by "Release" you mean Rel_S60_23_WINSCW then such configuration does not exist indeed, the SDK does not deliver the release version of the WINSCW binaries.
    -- Lucian

    If you are not yet a DVLUP member it is time to correct that mistake :) Click here to join: http://www.dvlup.com/lucian/Invite

  3. #3
    Registered User
    Join Date
    Dec 2005
    Posts
    1,236

    Re: [moved] Error in create sis file.

    I think you should try for gcce urel.
    Regards,
    Sriky

  4. #4
    Regular Contributor
    Join Date
    Aug 2008
    Location
    Zanjan
    Posts
    183

    Re: [moved] Error in create sis file.

    hi ltomuta
    We want to create a sis file & We use MS Visual studio.NET2003 + carbide.vs + SDK 2nd,fp3.
    how we to do this actually?
    thanks

  5. #5
    Regular Contributor
    Join Date
    Aug 2008
    Location
    Zanjan
    Posts
    183

    Re: [moved] Error in create sis file.

    hi sriky
    Quote Originally Posted by sriky27 View Post
    I think you should try for gcce urel.
    where can we find it? & how we use it? & can you give us docs or links.
    thanks

  6. #6
    Nokia Developer Moderator
    Join Date
    Sep 2004
    Location
    Tampere, Finland
    Posts
    11,359

    Re: [moved] Error in create sis file.

    Use the THUMB or ARMI release configurations, they are building the application for running it on device. SIS building will likely be part of the build process but you need to make sure that the PKG file is up to date.
    -- Lucian

    If you are not yet a DVLUP member it is time to correct that mistake :) Click here to join: http://www.dvlup.com/lucian/Invite

  7. #7
    Regular Contributor
    Join Date
    Aug 2008
    Location
    Zanjan
    Posts
    183

    Re: [moved] Error in create sis file.

    Dear Itomuta
    we used ARMI & THUMB.and select solution config: "Release" but we face of this message : "SDK for build configuration Release is not installed.The build will probably fail."
    what problem?
    thanks

  8. #8
    Nokia Developer Moderator
    Join Date
    Sep 2004
    Location
    Tampere, Finland
    Posts
    11,359

    Re: [moved] Error in create sis file.

    It must be years since I've last tried Carbide.vs so I'm afraid I can't help much.

    Here's an old post indicating that you should be paying attention when importing the project: http://discussion.forum.nokia.com/fo...ad.php?t=76009
    -- Lucian

    If you are not yet a DVLUP member it is time to correct that mistake :) Click here to join: http://www.dvlup.com/lucian/Invite

  9. #9
    Regular Contributor
    Join Date
    Aug 2008
    Location
    Zanjan
    Posts
    183

    Re: [moved] Error in create sis file.

    dear itomuta
    thanks a lot
    now can you help us about gcce urel.
    too we had saw your link that give us before.
    Quote Originally Posted by ltomuta View Post
    It must be years since I've last tried Carbide.vs so I'm afraid I can't help much.

    Here's an old post indicating that you should be paying attention when importing the project: http://discussion.forum.nokia.com/fo...ad.php?t=76009

  10. #10
    Nokia Developer Moderator
    Join Date
    Sep 2004
    Location
    Tampere, Finland
    Posts
    11,359

    Re: [moved] Error in create sis file.

    What about GCCE UREL? That is a target specific to S60 3rd Edtion and later, you do not have support for it on S60 2nd Edition FP3
    -- Lucian

    If you are not yet a DVLUP member it is time to correct that mistake :) Click here to join: http://www.dvlup.com/lucian/Invite

  11. #11
    Regular Contributor
    Join Date
    Aug 2008
    Location
    Zanjan
    Posts
    183

    Re: [moved] Error in create sis file.

    thanks itomuta
    we dont know doing it?
    Quote Originally Posted by ltomuta View Post
    What about GCCE UREL? That is a target specific to S60 3rd Edtion and later, you do not have support for it on S60 2nd Edition FP3

  12. #12
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,671

    Re: [moved] Error in create sis file.

    It is not about knowing / not knowing. There is no GCCE target in Symbian 6-7-8 / S60 1st and 2nd editions.

  13. #13
    Regular Contributor
    Join Date
    Aug 2008
    Location
    Zanjan
    Posts
    183

    Re: [moved] Error in create sis file.

    thanks wizard
    we how can create a sis file for our program?
    we saw all documents but not exist a way for it.
    too we use sdk 2, fp3 with .net 2003 & carbide vs.
    Quote Originally Posted by wizard_hu_ View Post
    It is not about knowing / not knowing. There is no GCCE target in Symbian 6-7-8 / S60 1st and 2nd editions.

  14. #14
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,344

    Re: [moved] Error in create sis file.

    You can try from command prompt as well.

    Code:
    abld build thumb urel
    or

    Code:
    abld build armi urel
    See what it says after executing above line.
    Nokia Developer Wiki Moderation team

  15. #15
    Regular Contributor
    Join Date
    Aug 2008
    Location
    Zanjan
    Posts
    183

    Re: [moved] Error in create sis file.

    thanks kiran
    we make "abld.bat" and run "makesis btdiscovery.pkg" but we face of this error:
    "processing btdiscovery.pkg...
    btdiscovery.pkg(10) : error: file not found"

    Quote Originally Posted by kiran10182 View Post
    You can try from command prompt as well.

    Code:
    abld build thumb urel
    or

    Code:
    abld build armi urel
    See what it says after executing above line.

Similar Threads

  1. [announce] PyUIQ. Python for UIQ 2.1 and 3.x
    By OscarBernabeu in forum Symbian
    Replies: 35
    Last Post: 2008-01-17, 09:12
  2. Replies: 4
    Last Post: 2007-12-18, 11:06
  3. File corrupted - with signed sis
    By annehj in forum Carbide.c++ IDE and plug-ins (Closed)
    Replies: 4
    Last Post: 2007-12-10, 13:44
  4. Mobile Virus Info and Solution
    By kunalshastry in forum General Development Questions
    Replies: 16
    Last Post: 2007-08-07, 11:12
  5. Create a sis file?
    By sanju in forum Symbian
    Replies: 2
    Last Post: 2006-08-08, 07:27

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×