×

Discussion Board

Results 1 to 6 of 6
  1. #1
    Registered User
    Join Date
    May 2008
    Location
    Indonesia, Bandung
    Posts
    6

    [moved] build problem (was Re: Problems in Getting Cell Ids and Signal Strengths)

    OK, now i got this problem, anyone knows why?

    gcc -s -fomit-frame-pointer -O -march=armv4t -mthumb-interwork -pipe -c -nostdinc -Wall -Wno-ctor-dtor-privacy -Wno-unknown-pragmas -DNDEBUG -D_UNICODE -D__SYMBIAN32__ -D__GCC32__ -D__EPOC32__ -D__MARM__ -D__MARM_ARMI__ -D__DLL__ -I "..\SRC" -I "..\INC" -I "../../../EPOC32/INCLUDE" -I "..\..\..\EPOC32\INCLUDE" -o ..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\HELLOWORLDPLUS\GROUP\HELLOWORLDPLUS\ARMI\UREL\QUYUAPP.o "..\SRC\Quyuapp.cpp"
    gcc -s -fomit-frame-pointer -O -march=armv4t -mthumb-interwork -pipe -c -nostdinc -Wall -Wno-ctor-dtor-privacy -Wno-unknown-pragmas -DNDEBUG -D_UNICODE -D__SYMBIAN32__ -D__GCC32__ -D__EPOC32__ -D__MARM__ -D__MARM_ARMI__ -D__DLL__ -I "..\SRC" -I "..\INC" -I "../../../EPOC32/INCLUDE" -I "..\..\..\EPOC32\INCLUDE" -o ..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\HELLOWORLDPLUS\GROUP\HELLOWORLDPLUS\ARMI\UREL\QUYUCONTAINER.o "..\SRC\Quyucontainer.cpp"
    gcc -s -fomit-frame-pointer -O -march=armv4t -mthumb-interwork -pipe -c -nostdinc -Wall -Wno-ctor-dtor-privacy -Wno-unknown-pragmas -DNDEBUG -D_UNICODE -D__SYMBIAN32__ -D__GCC32__ -D__EPOC32__ -D__MARM__ -D__MARM_ARMI__ -D__DLL__ -I "..\SRC" -I "..\INC" -I "../../../EPOC32/INCLUDE" -I "..\..\..\EPOC32\INCLUDE" -o ..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\HELLOWORLDPLUS\GROUP\HELLOWORLDPLUS\ARMI\UREL\QUYUREFRESH.o "..\SRC\Quyurefresh.cpp"
    perl -S makedef.pl -Deffile "..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\HELLOWORLDPLUS\GROUP\HELLOWORLDPLUS\ARMI\UREL\HELLOWORLDPLUS.inf" -1 NewApplication__Fv "..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\HELLOWORLDPLUS\GROUP\HELLOWORLDPLUS\ARMI\HELLOWORLDPLUS.def"
    ld -s -e _E32Dll -u _E32Dll "..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\HELLOWORLDPLUS\GROUP\HELLOWORLDPLUS\ARMI\UREL\HELLOWORLDPLUS.exp" --dll \
    abld -v final ARMI UREL
    abld -c build ARMI UREL
    MISSING: \Symbian\7.0s\Series60_v20\EPOC32\RELEASE\ARMI\UREL\HELLOWORLDPLUS.APP
    MISSING: \Symbian\7.0s\Series60_v20\EPOC32\RELEASE\ARMI\UREL\HELLOWORLDPLUS.APP.MAP

  2. #2
    Nokia Developer Moderator
    Join Date
    Sep 2004
    Location
    Tampere, Finland
    Posts
    11,359

    Re: [moved] build problem (was Re: Problems in Getting Cell Ids and Signal Strengths)

    New problem means new thread, eventually also new forum...

    Can you show the MMP file, so that we understand what it is that you are building?

    Based on the Quyu*.cpp files I would expect that you're building Quyu.app thus I wonder how HELLOWORLDPLUS.APP sneaks into the picture.
    -- Lucian

    If you are not yet a DVLUP member it is time to correct that mistake :) Click here to join: http://www.dvlup.com/lucian/Invite

  3. #3
    Registered User
    Join Date
    May 2008
    Location
    Indonesia, Bandung
    Posts
    6

    Re: [moved] build problem (was Re: Problems in Getting Cell Ids and Signal Strengths)

    the problem is the same,but i tried to show the error message...okay..thanks..i used the helloworldplus template for those quyu* sourcecodes

    TARGET helloworldplus.app
    TARGETTYPE app

    // Change the second number here to change the UID for this application
    UID 0x100039CE 0x10005bcb
    TARGETPATH \system\apps\helloworldplus

    SOURCEPATH ..\group
    USERINCLUDE ..\inc
    USERINCLUDE ../../../Epoc32/include


    SYSTEMINCLUDE \epoc32\include

    LIBRARY euser.lib
    LIBRARY apparc.lib
    LIBRARY cone.lib
    LIBRARY eikcore.lib
    LIBRARY avkon.lib
    LIBRARY commonengine.lib
    LIBRARY gsmbas.lib
    LIBRARY etel.lib
    LIBRARY gdi.lib
    LIBRARY gsmadv.lib
    LIBRARY hwtricks.lib
    LIBRARY estlib.lib

    SOURCEPATH ..\src
    SOURCE QuyuContainer.cpp
    SOURCE QuyuApp.cpp
    SOURCE QuyuRefresh.cpp

  4. #4
    Nokia Developer Moderator
    Join Date
    Sep 2004
    Location
    Tampere, Finland
    Posts
    11,359

    Re: [moved] build problem (was Re: Problems in Getting Cell Ids and Signal Strengths)

    Let's hope that you have made the right changes in the right places. I don't understand however why you don't simply generate a new project or keep the original helloworldbasic and modify only the *AppUI::HandleCommandL method to allow the execution of your test code.

    Please clean the project and then post the full build output from the console.
    -- Lucian

    If you are not yet a DVLUP member it is time to correct that mistake :) Click here to join: http://www.dvlup.com/lucian/Invite

  5. #5
    Registered User
    Join Date
    May 2008
    Location
    Indonesia, Bandung
    Posts
    6

    Re: [moved] build problem (was Re: Problems in Getting Cell Ids and Signal Strengths)

    those warnings dont have effect on build, i think the error began from the bold(i make it bold), if the build succeeded, it always writes" ld -s -e _E32Dll -u _E32Dll --dll \
    • petran "..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYU\GROUP\QUYU\ARMI\UREL\QUYU.APP" "..\..\..\EPOC32\RELEASE\ARMI\UREL\QUYU.APP" \
    " after the bold message

    bldmake -v bldfiles
    abld -v makefile ARMI
    perl -S makmake.pl -D \SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU ARMI
    abld -v reallyclean ARMI UREL
    Clean finished
    bldmake -v bldfiles
    abld -v export
    abld -v makefile ARMI
    perl -S makmake.pl -D \SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU ARMI
    abld -v resource ARMI UREL
    perl -S epocrc.pl -I "." -I "..\INC" -I "../../../EPOC32/INCLUDE" -I- -I "..\..\..\EPOC32\INCLUDE" -DLANGUAGE_SC -u "\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU.RSS" -o\Symbian\7.0s\Series60_v20\EPOC32\DATA\Z\SYSTEM\APPS\QUYU\QUYU.RSC -h"\Symbian\7.0s\Series60_v20\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI\QUYU.rsg" -t"\Symbian\7.0s\Series60_v20\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI" -l"Z\SYSTEM\APPS\QUYU:\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP"
    perl -S ecopyfile.pl "\Symbian\7.0s\Series60_v20\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI\QUYU.rsg" "\Symbian\7.0s\Series60_v20\EPOC32\INCLUDE\QUYU.RSG"
    perl -S emkdir.pl \Symbian\7.0s\Series60_v20\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI\UREL
    abld -v library ARMI
    Compile finished
    abld -v target ARMI UREL
    "QuyuContainer.cpp": warning: unused variable `TReal lon' at line 475
    "QuyuContainer.cpp": warning: unused variable `TReal lat2' at line 556
    "QuyuContainer.cpp": warning: unused variable `TReal rs2' at line 370
    "QuyuContainer.cpp": warning: unused variable `TReal rs1' at line 346
    "QuyuContainer.cpp": warning: unused variable `TReal ta' at line 325
    gcc -s -fomit-frame-pointer -O -march=armv4t -mthumb-interwork -pipe -c -nostdinc -Wall -Wno-ctor-dtor-privacy -Wno-unknown-pragmas -DNDEBUG -D_UNICODE -D__SYMBIAN32__ -D__GCC32__ -D__EPOC32__ -D__MARM__ -D__MARM_ARMI__ -D__DLL__ -I "..\SRC" -I "..\INC" -I "../../../EPOC32/INCLUDE" -I "..\..\..\EPOC32\INCLUDE" -o ..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI\UREL\QUYUAPP.o "..\SRC\Quyuapp.cpp"
    gcc -s -fomit-frame-pointer -O -march=armv4t -mthumb-interwork -pipe -c -nostdinc -Wall -Wno-ctor-dtor-privacy -Wno-unknown-pragmas -DNDEBUG -D_UNICODE -D__SYMBIAN32__ -D__GCC32__ -D__EPOC32__ -D__MARM__ -D__MARM_ARMI__ -D__DLL__ -I "..\SRC" -I "..\INC" -I "../../../EPOC32/INCLUDE" -I "..\..\..\EPOC32\INCLUDE" -o ..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI\UREL\QUYUCONTAINER.o "..\SRC\Quyucontainer.cpp"
    gcc -s -fomit-frame-pointer -O -march=armv4t -mthumb-interwork -pipe -c -nostdinc -Wall -Wno-ctor-dtor-privacy -Wno-unknown-pragmas -DNDEBUG -D_UNICODE -D__SYMBIAN32__ -D__GCC32__ -D__EPOC32__ -D__MARM__ -D__MARM_ARMI__ -D__DLL__ -I "..\SRC" -I "..\INC" -I "../../../EPOC32/INCLUDE" -I "..\..\..\EPOC32\INCLUDE" -o ..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI\UREL\QUYUREFRESH.o "..\SRC\Quyurefresh.cpp"
    perl -S makedef.pl -Deffile "..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI\UREL\QUYU.inf" -1 NewApplication__Fv "..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI\QUYU.def"
    ld -s -e _E32Dll -u _E32Dll "..\..\..\EPOC32\BUILD\SYMBIAN\7.0S\SERIES60_V20\SERIES60EX\QUYUS\GROUP\QUYU\ARMI\UREL\QUYU.exp" --dll \
    abld -v final ARMI UREL
    abld -c build ARMI UREL
    MISSING: \Symbian\7.0s\Series60_v20\EPOC32\RELEASE\ARMI\UREL\QUYU.APP
    MISSING: \Symbian\7.0s\Series60_v20\EPOC32\RELEASE\ARMI\UREL\QUYU.APP.MAP
    abld -w build ARMI UREL
    makesis -v -dC:\Symbian\7.0s\Series60_v20\epoc32\release\ARMI\UREL _tmp43361.pkg quyu_ARMI_UREL.sis
    "_tmp43361.pkg": processing languages at line 1
    "_tmp43361.pkg": processing header at line 3
    "_tmp43361.pkg": processing dependency at line 4
    "_tmp43361.pkg": processing file at line 6
    "_tmp43361.pkg": error: file not found at line 6
    External process exited with error code : 1
    Build finished

  6. #6
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,347

    Re: [moved] build problem (was Re: Problems in Getting Cell Ids and Signal Strengths)

    Quote Originally Posted by hilalnuha View Post
    "_tmp43361.pkg": error: file not found at line 6
    External process exited with error code : 1
    What is there at line 6 in your .pkg file? That file does not exist and that's what the problem is. I think it is QUYU.APP.
    Nokia Developer Wiki Moderation team

Similar Threads

  1. Replies: 3
    Last Post: 2009-06-09, 16:25
  2. Location Estimation based on Multiple BTS Cell IDs
    By hU in forum Symbian Networking & Messaging (Closed)
    Replies: 3
    Last Post: 2009-06-09, 15:57
  3. Neighbour cell ids and their signal strength
    By cepetlupa in forum Symbian
    Replies: 20
    Last Post: 2008-12-14, 18:10
  4. Replies: 0
    Last Post: 2007-10-07, 06:42

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×