×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Mar 2009
    Posts
    23

    series 40, "tag cannot be used" problem with OMNIKEY external reader and card

    Hello,

    I installed OMNIKEY Cardman 5231 as an external reader for the NFC manager. After I attached the reader it appeared under the NFC antenna. Then a place a (SDiD)card near the 5231 card reader (the card works with the reader for sure using vb example), "Tag cannot be used" showed on emulator screen.

    Does anyone know what is the reason for that? Do I need to do anything to make the external reader to "read/write" the card? I went through the series 40 help docu but did not find info about it. Any help will be appreciated. Thanks!

  2. #2
    Nokia Developer Expert
    Join Date
    Dec 2007
    Posts
    46

    Re: series 40, "tag cannot be used" problem with OMNIKEY external reader and card

    Hi,

    It means that you can connect the OMNIKEY reader with NFC Manager, but not able to read the card.

    SDK/NFC Manager supports ISO 14443 smart card and ISO 14443 with NDEF cards - Is your card one among them or something different.

    Regards
    Ravikumar

Similar Threads

  1. Omnikey 5321 Reader & Nokia 6131 NFC 1.1 SDk
    By geri-m in forum Near Field Communication
    Replies: 4
    Last Post: 2008-10-09, 08:07
  2. Help!! Reading and writing to cards from the 6131 and from a card reader
    By wobbly101 in forum Near Field Communication
    Replies: 1
    Last Post: 2008-02-23, 21:08
  3. increment and decrement problem with external reader
    By ehindriks in forum Near Field Communication
    Replies: 6
    Last Post: 2007-08-13, 05:08
  4. Problem MMC+USB Connection
    By Fede81 in forum Symbian
    Replies: 1
    Last Post: 2007-06-14, 06:13
  5. Problem MMC+USB Connection
    By Fede81 in forum General Development Questions
    Replies: 3
    Last Post: 2006-07-19, 15:21

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×