×

Discussion Board

Results 1 to 12 of 12
  1. #1
    Registered User
    Join Date
    Apr 2009
    Posts
    7

    MyFirstProject Emulator debug problem

    Hi,

    This is my first Carbide.C++ project, It cann't debug on emulator, I spended long time cann't go over, can anyone give me a help.

    My PC OS: Vista Professional
    ActivePerl: 5.6.1.635
    IDE: Carbide.C++ 2.0
    SDK: 3rd edition FP2_v1_1
    GCCE patch for vista has been applied
    CSL toolChain (GCCE) already installed.

    I follow Symbian C++ eLearning tutorial "Getting started with Carbide.C++" create the MyFirstProject with wizard, when I run Emulator Debug as:
    MyFirstProject Emulator Debug (WINSCW) [S60_3rd_FP2_SDK_v1.1]
    it gave me error:
    No source available for "0x2E6C6C75( field.dll )() "


  2. #2
    Nokia Developer Champion
    Join Date
    Mar 2006
    Location
    Helsinki, Finland
    Posts
    8,336

    Re: MyFirstProject Emulator debug problem

    Apart from debugging, are you able to build it successfully for Emulator(WINSCW UDEB) ?
    Nokia Developer Wiki Moderation team

  3. #3
    Super Contributor
    Join Date
    Mar 2004
    Location
    Singapore
    Posts
    9,968

    Re: MyFirstProject Emulator debug problem

    Are you sure your Emulator Starts with out Error ?

  4. #4
    Registered User
    Join Date
    Apr 2009
    Posts
    7

    Re: MyFirstProject Emulator debug problem

    Quote Originally Posted by kiran10182 View Post
    Apart from debugging, are you able to build it successfully for Emulator(WINSCW UDEB) ?
    Yes, it is built successfully.

    and I used context munu: "Debug as -> Debug Sybian OS application" as the tutorial instructed.

    Then how to launch Emulator seperately?

    Thanks.

  5. #5
    Super Contributor
    Join Date
    Mar 2004
    Location
    Singapore
    Posts
    9,968

    Re: MyFirstProject Emulator debug problem

    Then how to launch Emulator seperately?
    Just type "epoc" from command line

  6. #6
    Registered User
    Join Date
    Apr 2009
    Posts
    7

    Re: MyFirstProject Emulator debug problem

    Quote Originally Posted by skumar_rao View Post
    Just type "epoc" from command line
    Thanks for help.

    Run epoc.exe from command line display message "epoc.exe has stopped working", what should I do.

    Forgive me I am Symbian beginner.
    Last edited by gouyang; 2009-04-19 at 17:13.

  7. #7
    Super Contributor
    Join Date
    Mar 2004
    Location
    Singapore
    Posts
    9,968

    Re: MyFirstProject Emulator debug problem

    So the problem is with you Emulator Not with your test application.
    I suggest you search in wiki and this section for all possible solutions. For "Emulator Not working on Vista" Problem

  8. #8
    Nokia Developer Champion
    Join Date
    Oct 2007
    Location
    જુનાગઢ - India
    Posts
    3,034

    Re: MyFirstProject Emulator debug problem

    Following article might be useful to you.

    http://wiki.forum.nokia.com/index.ph...10_seconds_fix

  9. #9
    Registered User
    Join Date
    Apr 2009
    Posts
    7

    Re: MyFirstProject Emulator debug problem

    Quote Originally Posted by savaj View Post
    Following article might be useful to you.

    http://wiki.forum.nokia.com/index.ph...10_seconds_fix
    I have followed this post instruction, but it does not work for my case.

    1.Disable High Definition Audio Device
    2.Execute "bcdedit.exe /set {current} nx AlwaysOff " as Administrator at Command Prompt
    3.Apply Vista patch at MyFirstProject\group folder

    when I run epoc.exe at command prompt, still give me "epoc.exe has stopped working" messagebox
    and MyFirstProject Emulator Debug generated same error at the first post show.

  10. #10
    Super Contributor
    Join Date
    Mar 2004
    Location
    Singapore
    Posts
    9,968

    Re: MyFirstProject Emulator debug problem

    you have fix the Emulator Starting Error Before you can debug your application.

  11. #11
    Registered User
    Join Date
    Apr 2009
    Posts
    7

    Re: MyFirstProject Emulator debug problem

    Still don't know how to solve this problem.

    1.Disable High Definition Audio Device
    2.Execute "bcdedit.exe /set {current} nx AlwaysOff "

    only take away part of obstacle to run Symbian Emulator.

    I tried to unblock firewall, no differency.
    Last edited by gouyang; 2009-04-20 at 23:25.

  12. #12
    Registered User
    Join Date
    Apr 2009
    Posts
    7

    Re: MyFirstProject Emulator debug problem

    The problem "epoc.exe stop working" has been solved by reinstall SDK at "Default" location.

Similar Threads

  1. STLPort namespace issue
    By yickhong in forum Open C/C++
    Replies: 0
    Last Post: 2009-04-09, 08:54
  2. SyncML link problem
    By samuel_ in forum Symbian
    Replies: 4
    Last Post: 2009-03-27, 08:02
  3. Problem with eglSwapBuffers and heap corruption
    By greatape in forum Symbian Media (Closed)
    Replies: 2
    Last Post: 2007-05-24, 03:35
  4. netcards - Problem with opening adapter
    By kernj in forum Symbian Tools & SDKs
    Replies: 5
    Last Post: 2007-01-10, 08:56
  5. Problem: S60 SDK for CW in PC with .NET
    By anttij in forum Carbide.c++ IDE and plug-ins (Closed)
    Replies: 1
    Last Post: 2005-02-28, 11:36

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •