×

Discussion Board

Results 1 to 4 of 4
  1. #1
    Registered User
    Join Date
    May 2007
    Location
    Poland
    Posts
    606

    Hardware/UI platform dependency

    Hello,
    I m wondering what UID should i include in my pkg file.
    I m planning to certified sign my application in Nokia for AllFiles capabilities.

    There is information that:
    Code:
    The application must define the manufacturer ID ([1]) in the PKG
    Nokia's id is: Nokia TManufacturer::EManufacturer_Nokia 0x00000002

    I have to include UID of platforms on which application will be installed.
    Should my pkg looks like that:

    Code:
    ...
    ;Supports Nokia
    [0x00000002], 0, 0, 0, {"NokiaID"}
    
    ;Supports S60 release 3.0
    [0x101F7961], 0, 0, 0, {"Series60ProductID"}
    
    ;Supports S60 release 5.0
    [0x1028315F], 0, 0, 0, {"Series60ProductID"}
    
    ...
    When i changed Nokia ID to SonyEricsson ID i have installed application on my Nokia device without any problem.

    Thanks in advance

    nuker85

  2. #2
    Nokia Developer Moderator
    Join Date
    Sep 2004
    Location
    Tampere, Finland
    Posts
    11,359

    Re: Hardware/UI platform dependency

    Your answer is, as usual, in the wiki
    http://wiki.forum.nokia.com/index.php/Manufacturer_id
    -- Lucian

    If you are not yet a DVLUP member it is time to correct that mistake :) Click here to join: http://www.dvlup.com/lucian/Invite

  3. #3
    Registered User
    Join Date
    May 2007
    Location
    Poland
    Posts
    606

    Re: Hardware/UI platform dependency

    Tnx for fast replay,

    I have seen it and tried it.
    It just informs that it s not for this manufacturer but if you press yes it will install.
    Is that enough?

    I have set IF manufacturer = 3 (Panasonic)
    and on Nokia got information (from the file) Yes/No
    I pressed Yes and installation continues. (maybe this happens because i ve got developer certificate and Nokia certified application will not allow to install it by pressing YES, or it s just ok?)
    If i just set FILETEXT and press continue button installation successfully complete (of course nothing is installed so i ve got empty application installed on the device what doesn t seem to be professional)

    Is that enough for certified signing ?

    thanks in advance

    nuker85
    Last edited by nuker85; 2010-01-13 at 15:31.

  4. #4
    Nokia Developer Moderator
    Join Date
    Sep 2004
    Location
    Tampere, Finland
    Posts
    11,359

    Re: Hardware/UI platform dependency

    Since all your file copying is done only if manufacturer == 2 (Nokia) the installation may in fact "succeed" for the wrong manufacturer but without the files being actually deployed to the device.

    Optimally the installation would indeed fail but if that cannot be achieved you have to settle for the next best thing and that is ensure that your applications cannot be used in devices for which you do not have the capability usage approved. Or get approvals from all manufacturers,
    -- Lucian

    If you are not yet a DVLUP member it is time to correct that mistake :) Click here to join: http://www.dvlup.com/lucian/Invite

Similar Threads

  1. Problem adding Java ME MIDP Platform Emulator in NetBeans 6.5
    By furau in forum Mobile Java Tools & SDKs
    Replies: 4
    Last Post: 2010-11-26, 09:42
  2. S60 Java Platform issues
    By FragMagnet in forum Mobile Java Tools & SDKs
    Replies: 5
    Last Post: 2009-03-20, 14:36
  3. Problems about maemo 4.0.1 SDK installation.
    By fgg_maemo in forum General Development Questions
    Replies: 3
    Last Post: 2008-10-07, 14:26
  4. help help. can't run in WINSB platform
    By khinsen in forum Symbian Tools & SDKs
    Replies: 6
    Last Post: 2005-01-03, 17:58

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×