×

Discussion Board

Results 1 to 12 of 12
  1. #1
    Registered User
    Join Date
    Dec 2009
    Posts
    5

    Make .sis file with QtCreator

    Hi,
    How i can make a .sis or .sisx file with Qt creator ? I have to import my project to Carbide.c++ but is not working.

    Thanks for your help.

  2. #2
    Regular Contributor
    Join Date
    Nov 2009
    Posts
    83

    Re: Make .sis file with QtCreator

    These are the steps how I make the sis file:
    "running the qt for symbian command prompt;
    cd to the file of your project
    qmake
    make release-gcce
    make sis"

    that's it. Then you can get the .sis file.

    Good Luck!

  3. #3
    Nokia Developer Champion
    Join Date
    Nov 2009
    Location
    Minnesota, USA
    Posts
    3,209

    Re: Make .sis file with QtCreator

    I've not tried it on Creator, but under Carbide you have to set up the "build configuration" -- specify the PKG file. I'd give you chapter and verse except that I'm in the middle of uninstalling/reinstalling everything.

  4. #4
    Nokia Developer Champion
    Join Date
    Mar 2009
    Posts
    430

    Re: Make .sis file with QtCreator

    If you try to run the application on your device from creator, it will create the .sis files, at least if you have a device connected.

  5. #5
    Registered User
    Join Date
    Dec 2009
    Posts
    5

    Re: Make .sis file with QtCreator

    Quote Originally Posted by pta0007 View Post
    These are the steps how I make the sis file:
    "running the qt for symbian command prompt;
    cd to the file of your project
    qmake
    make release-gcce
    make sis"

    that's it. Then you can get the .sis file.

    Good Luck!
    Hi, thanks for your answer.

    When i follow your command i have 4errors with makefile.
    But if i make my project with Qt creator i have no error.

    Quote Originally Posted by axeljaeger
    If you try to run the application on your device from creator, it will create the .sis files, at least if you have a device connected.
    I have connect my n97 and config Qt Creator but i have error with message "No phone connected".

    I have screen my Qt Creator config, and upload here.

    Thanks again for help me.

  6. #6
    Registered User
    Join Date
    Dec 2009
    Posts
    5

    Re: Make .sis file with QtCreator

    Any one for help me ?

  7. #7
    Nokia Developer Champion
    Join Date
    Nov 2009
    Location
    Minnesota, USA
    Posts
    3,209

    Re: Make .sis file with QtCreator

    On Carbide, in order to create a .sis file, you must edit the properties of the project and select "Build Configuration" (shown under the "Carbide.c++" category).

    There you select the phone (vs emulator) configuration and the "SIS Builder" tab. Pressing "Add" on that tab gives you a SIS Properties screen. You must fill in the PKG file name on that screen. (The rest can default.)

    I don't know how much this procedure resembles what goes on with Creator.

  8. #8
    Registered User
    Join Date
    Dec 2009
    Posts
    5

    Re: Make .sis file with QtCreator

    I try create a .sis with QtCreator on my laptop, and it's work.
    So i think my pc have a bad configurations.

    My problem are resolved, thanks again for help me

  9. #9
    Registered User
    Join Date
    Apr 2009
    Posts
    506

    Wink Re: Make .sis file with QtCreator

    Quote Originally Posted by exitlol View Post
    Hi,
    How i can make a .sis or .sisx file with Qt creator ? I have to import my project to Carbide.c++ but is not working.

    Thanks for your help.
    just add "make sis" build step in Qt Creator's Projects tab for the project

  10. #10
    Registered User
    Join Date
    Jan 2011
    Posts
    4

    Re: Make .sis file with QtCreator

    Quote Originally Posted by vladest View Post
    just add "make sis" build step in Qt Creator's Projects tab for the project
    I have that option when I use QT Creator 2.01, but when I use QT Creator 2.1 I don't have it. Does anybody knows how to activate it?

  11. #11
    Registered User
    Join Date
    Jan 2011
    Posts
    4

    Re: Make .sis file with QtCreator

    Found, it was in the Deploy screen instead of the make one.

  12. #12
    Registered User
    Join Date
    May 2012
    Posts
    1

    Re: Make .sis file with QtCreator

    apply the best for my Nokia C7

Similar Threads

  1. how 2 make .sis file???
    By nmostafa in forum Mobile Java General
    Replies: 14
    Last Post: 2008-03-02, 11:38
  2. [announce] PyUIQ. Python for UIQ 2.1 and 3.x
    By OscarBernabeu in forum Python
    Replies: 35
    Last Post: 2008-01-17, 09:12
  3. Building on Vista - make permissions
    By clawton in forum Symbian Tools & SDKs
    Replies: 2
    Last Post: 2007-10-31, 17:44
  4. how 2 make .sis file???
    By nmostafa in forum Mobile Java Tools & SDKs
    Replies: 2
    Last Post: 2005-10-17, 00:55
  5. Replies: 1
    Last Post: 2005-05-26, 14:22

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •