×

Discussion Board

Results 1 to 6 of 6
  1. #1
    Registered User
    Join Date
    May 2010
    Posts
    6

    Unhappy Help required for Calling all innovators challenge

    I have made an application which I intend to deploy on S60v3 and S60v5 phones, however I am unable to compile binaries for them as I encounter the following error while building with:

    Code:
    make release-gcce
    The error is in Qtuitools.lib where it says "could not read symbols: bad value"
    the entire compile output is:

    Code:
    bldmake bldfiles
    ABLD.BAT build gcce udeb
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\EXPORT.make" EXPORT VERBOSE=-s
    make[1]: Entering directory `D:/myDoc'
    Nothing to do
    make[1]: Leaving directory `D:/myDoc'
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" MAKEFILE VERBOSE=-s
    make[1]: Entering directory `D:/myDoc'
    make -s  -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE MAKMAKE
    perl -S makmake.pl  -D \myDoc\MYDOC_0XE613A542 GCCE  
    	perl -S ecopyfile.pl "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\myDoc.rsg" "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\myDoc.rsg"
    make[1]: Leaving directory `D:/myDoc'
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" LIBRARY VERBOSE=-s
    make[1]: Entering directory `D:/myDoc'
    make -s  -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE LIB
    make -s  -r -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\MYDOC_0XE613A542.GCCE" LIBRARY
    make[1]: Leaving directory `D:/myDoc'
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" RESOURCE CFG=UDEB VERBOSE=-s
    make[1]: Entering directory `D:/myDoc'
    make -s  -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE CFG=UDEB RESOURCE
    make -s  -r -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\MYDOC_0XE613A542.GCCE" RESOURCEUDEB
    
    
    make[1]: Leaving directory `D:/myDoc'
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" TARGET CFG=UDEB VERBOSE=-s
    make[1]: Entering directory `D:/myDoc'
    make -s  -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE CFG=UDEB BLD
    make -s  -r -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\MYDOC_0XE613A542.GCCE" UDEB
    make[1]: Leaving directory `D:/myDoc'
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" FINAL CFG=UDEB VERBOSE=-s
    make[1]: Entering directory `D:/myDoc'
    make -s  -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE CFG=UDEB FINAL
    make[1]: Leaving directory `D:/myDoc'
    and the error occurs after this, as :-
    Code:
    \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\udeb\QtUiTools.lib: could not read symbols: Bad value
    make[2]: *** [\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\GCCE\udeb\myDoc.exe] Error 1
    make[1]: *** [TARGETMYDOC_0XE613A542] Error 2
    and so i cannot make sis, and deploy.
    However I can run this on windows.
    my system configuration is :
    Code:
    Windows 7
    qt-sdk-win-opensource-2010.02.1
    qt-symbian-opensource-4.6.2
    Carbide.c++_v2.3
    S60_3rd_Edition_SDK_Feature_Pack_2_v1_1_en_2
    s60_open_c_cpp_plug_in_v1_6_en
    ActivePerl-5.10.1.1007-MSWin32-x86-291969

    The application makes frequent use of:

    Code:
    #include <QtXmlPatterns>
    #include <QNetworkAccessManager>
    #include <QtUiTools/QUiLoader>
    #include <QFile>
    #include <QVBoxLayout>

  2. #2
    Regular Contributor
    Join Date
    Sep 2008
    Posts
    286

    Re: Help required for Calling all innovators challenge

    Hi,
    Error sounds like you might have wrong linker version in use (if that is all possible).
    Can you compile with verbose output on and post that log?

    qmake
    abld build gcce urel -v >log.txt 2>&1

  3. #3
    Registered User
    Join Date
    May 2010
    Posts
    6

    Re: Help required for Calling all innovators challenge

    I have run the command and here is the complete log file, I hope you can more sense of it than I do:

    Thanks

    Code:
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\EXPORT.make" EXPORT
    Nothing to do
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" MAKEFILE
    make   -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE MAKMAKE
    make[1]: Entering directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" create_temps QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Leaving directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" pre_targetdeps QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Nothing to be done for `pre_targetdeps'.
    make[2]: Leaving directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" store_build QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Leaving directory `D:/myDoc'
    make[1]: Leaving directory `D:/myDoc'
    perl -S makmake.pl  -D \myDoc\MYDOC_0XE613A542 GCCE  
    	perl -S ecopyfile.pl "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\myDoc.rsg" "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\myDoc.rsg"
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" LIBRARY
    make   -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE LIB
    make[1]: Entering directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" create_temps QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Leaving directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" pre_targetdeps QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Nothing to be done for `pre_targetdeps'.
    make[2]: Leaving directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" store_build QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Leaving directory `D:/myDoc'
    make[1]: Leaving directory `D:/myDoc'
    make   -r -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\MYDOC_0XE613A542.GCCE" LIBRARY
    make[1]: Entering directory `D:/myDoc'
    make[1]: Nothing to be done for `LIBRARY'.
    make[1]: Leaving directory `D:/myDoc'
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" RESOURCE CFG=UREL
    make   -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE CFG=UREL RESOURCE
    make[1]: Entering directory `D:/myDoc'
    make[1]: Leaving directory `D:/myDoc'
    make   -r -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\MYDOC_0XE613A542.GCCE" RESOURCEUREL
    make[1]: Entering directory `D:/myDoc'
    perl -S epocrc.pl -m045,046,047 -I "\myDoc" -I- -I "\Qt\4.6.2-symbian\include\QtUiTools" -I "\Qt\4.6.2-symbian\include\QtUiTools\tmp" -I "\Qt\4.6.2-symbian\include\QtCore" -I "\Qt\4.6.2-symbian\include\QtCore\tmp" -I "\Qt\4.6.2-symbian\include\QtNetwork" -I "\Qt\4.6.2-symbian\include\QtNetwork\tmp" -I "\Qt\4.6.2-symbian\include\QtGui" -I "\Qt\4.6.2-symbian\include\QtGui\tmp" -I "\Qt\4.6.2-symbian\include\QtXml" -I "\Qt\4.6.2-symbian\include\QtXml\tmp" -I "\Qt\4.6.2-symbian\include\QtXmlPatterns" -I "\Qt\4.6.2-symbian\include\QtXmlPatterns\tmp" -I "\Qt\4.6.2-symbian\include" -I "\Qt\4.6.2-symbian\include\tmp" -I "\Qt\4.6.2-symbian\mkspecs\common\symbian" -I "\Qt\4.6.2-symbian\mkspecs\common\symbian\tmp" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include" -I "\myDoc" -I "\myDoc\tmp" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\stdapis" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\stdapis\sys" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\stdapis\stlport" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\variant" -DUNICODE  -DQT_KEYPAD_NAVIGATION  -DQT_SOFTKEYS_ENABLED  -DQT_USE_MATH_H_FLOATS  -DQT_XMLPATTERNS_LIB  -DQT_XML_LIB  -DQT_GUI_LIB  -DQT_NETWORK_LIB  -DQT_CORE_LIB  -DLANGUAGE_SC -u "\myDoc\myDoc.rss"    -o\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\data\z\resource\apps\myDoc.rsc   -h"\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\myDoc.rsg" -t"\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE" -l"z\resource\apps:\myDoc" -preinclude"\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\variant\Symbian_OS_v9.3.hrh"
    
    perl -S ecopyfile.pl "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\myDoc.rsg" "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\myDoc.rsg"
    perl -S epocrc.pl -m045,046,047 -I "\myDoc" -I- -I "\Qt\4.6.2-symbian\include\QtUiTools" -I "\Qt\4.6.2-symbian\include\QtUiTools\tmp" -I "\Qt\4.6.2-symbian\include\QtCore" -I "\Qt\4.6.2-symbian\include\QtCore\tmp" -I "\Qt\4.6.2-symbian\include\QtNetwork" -I "\Qt\4.6.2-symbian\include\QtNetwork\tmp" -I "\Qt\4.6.2-symbian\include\QtGui" -I "\Qt\4.6.2-symbian\include\QtGui\tmp" -I "\Qt\4.6.2-symbian\include\QtXml" -I "\Qt\4.6.2-symbian\include\QtXml\tmp" -I "\Qt\4.6.2-symbian\include\QtXmlPatterns" -I "\Qt\4.6.2-symbian\include\QtXmlPatterns\tmp" -I "\Qt\4.6.2-symbian\include" -I "\Qt\4.6.2-symbian\include\tmp" -I "\Qt\4.6.2-symbian\mkspecs\common\symbian" -I "\Qt\4.6.2-symbian\mkspecs\common\symbian\tmp" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include" -I "\myDoc" -I "\myDoc\tmp" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\stdapis" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\stdapis\sys" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\stdapis\stlport" -I "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\variant" -DUNICODE  -DQT_KEYPAD_NAVIGATION  -DQT_SOFTKEYS_ENABLED  -DQT_USE_MATH_H_FLOATS  -DQT_XMLPATTERNS_LIB  -DQT_XML_LIB  -DQT_GUI_LIB  -DQT_NETWORK_LIB  -DQT_CORE_LIB  -DLANGUAGE_SC -u "\myDoc\myDoc_reg.rss"    -o\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\data\z\private\10003a3f\import\apps\myDoc_reg.rsc   -t"\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE" -l"z\private\10003a3f\import\apps:\myDoc" -preinclude"\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\include\variant\Symbian_OS_v9.3.hrh"
    More ...

  4. #4
    Registered User
    Join Date
    May 2010
    Posts
    6

    Re: Help required for Calling all innovators challenge

    ... Continued

    Code:
    make[1]: Leaving directory `D:/myDoc'
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" TARGET CFG=UREL
    \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\urel\QtUiTools.lib: could not read symbols: Bad value
    make[1]: *** [\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\GCCE\urel\myDoc.exe] Error 1
    make: *** [TARGETMYDOC_0XE613A542] Error 2
    make   -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE CFG=UREL BLD
    make[1]: Entering directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" create_temps QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Leaving directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" pre_targetdeps QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Nothing to be done for `pre_targetdeps'.
    make[2]: Leaving directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" store_build QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Leaving directory `D:/myDoc'
    make[1]: Leaving directory `D:/myDoc'
    make   -r -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\MYDOC_0XE613A542.GCCE" UREL
    make[1]: Entering directory `D:/myDoc'
    arm-none-symbianelf-ld -L"D:\CSL Arm Toolchain\bin\..\arm-none-symbianelf\lib" -L"D:\CSL Arm Toolchain\bin\..\lib\gcc\arm-none-symbianelf\3.4.3"     --target1-abs --no-undefined -nostdlib  -shared -Ttext 0x8000   -Tdata 0x400000 --default-symver -soname myDoc{000a0000}[e613a542].exe --entry _E32Startup  -u _E32Startup  \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\urel\EEXE.LIB \
    	-o "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\urel\myDoc.exe" \
    	-Map  "\S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\GCCE\urel\myDoc.exe.map" \
    	  \S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MYDOC_0XE613A542\GCCE\myDoc.GCCE.UREL.objects.via\
    	-( \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\urel\usrt2_2.lib \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\urel\QtUiTools.lib \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\urel\qtmain.lib -) \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\QtXmlPatterns.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\QtXml.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\QtGui.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\QtNetwork.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\QtCore.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\libstdcpp.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\libc.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\libm.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\euser.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\libdl.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\dfpaeabi.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\dfprvct2_2.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\drtaeabi.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\scppnwdl.dso \S60\devices\S60_3rd_FP2_SDK_v1.1\epoc32\release\ARMV5\LIB\drtrvct2_2.dso -lsupc++ -lgcc \
    	  
    make[1]: Leaving directory `D:/myDoc'
      make -r  -f "\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\GCCE.make" FINAL CFG=UREL
    make   -C \myDoc -f "MAKEFILE_0XE613A542.MK" TO_ROOT=.. EPOCBLD=..\S60\devices\S60_3rd_FP2_SDK_v1.1\EPOC32\BUILD\myDoc\MAKEFILE_0XE613A542\GCCE TO_BLDINF=..\myDoc PLATFORM=GCCE CFG=UREL FINAL
    make[1]: Entering directory `D:/myDoc'
    make -f "d:\myDoc\Makefile" finalize QT_SIS_TARGET=RELEASE-GCCE
    make[2]: Entering directory `D:/myDoc'
    make[2]: Nothing to be done for `finalize'.
    make[2]: Leaving directory `D:/myDoc'
    make[1]: Leaving directory `D:/myDoc'

    I think the error is with the Quitools/Quiloader which I have used to dynamically generate ui at runtime from *.ui files embedded in resources.

  5. #5
    Regular Contributor
    Join Date
    Sep 2008
    Posts
    286

    Re: Help required for Calling all innovators challenge

    Thanks for the verbose output. Unfortunately there doesn't seem to be anything wrong with it.

    I thought I had seen this before and indeed there is already bug open about this issue:
    http://bugreports.qt.nokia.com/browse/QTBUG-5692


    -Janne

  6. #6
    Registered User
    Join Date
    Nov 2009
    Posts
    1

    Re: Help required for Calling all innovators challenge

    Hi,
    snehasishkumar have you handle somehow the problem with the QUiLoader ?
    I'm stuck at this point and don't know how to replace QUiLoader.
    QFormBuilder dosn't work for me either.
    Is there any other way to load external *.ui files ?

Similar Threads

  1. Million Dollar Challenge - Calling All Innovators
    By Nokia Ron in forum News and Announcements
    Replies: 1
    Last Post: 2010-01-08, 20:20
  2. carbide-error
    By upendersolanki in forum Carbide.c++ IDE and plug-ins (Closed)
    Replies: 5
    Last Post: 2008-02-06, 11:09
  3. Tip: Challenge start in high latency networks
    By heihauki in forum Mobile Java Games
    Replies: 1
    Last Post: 2007-02-22, 20:46
  4. Problem with Cabride.c++ v1.1
    By markovuksanovic in forum Carbide.c++ IDE and plug-ins (Closed)
    Replies: 3
    Last Post: 2007-01-24, 20:05

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×