×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Super Contributor
    Join Date
    Mar 2003
    Posts
    2,426

    How to get/choose the TP-Message Reference ?

    I am able to send messages indicating a status Request Status Report and I receive correctly de SMS-Status when the message is delivered to the destination. My problem is that the modem follows an internal sequencially Message Identifier that I cannot know which message belongs to. Is there any way to specify the Message Identifier (I do that in the PDU but it still uses its internal counter) or otherwise, can I get the internal modem counter using some AT command ??

    Thank you

    Posted by Alberto Devesa, alberto.devesa@m-centric.com
    on January 14, 2002 at 14:00

  2. #2
    Super Contributor
    Join Date
    Mar 2003
    Posts
    2,426

    RE: How to get/choose the TP-Message Reference ?

    Posted by Forum Nokia Developer Support,
    on January 21, 2002 at 00:43

    Hello,

    Upon successful messaging sending, the Message Reference is returned (shown). (See e.g. question 7 in the SmartMessaging FAQ.)

    Forum Nokia Developer Support

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×