×

Discussion Board

Page 1 of 3 123 LastLast
Results 1 to 15 of 39
  1. #1
    Regular Contributor
    Join Date
    May 2010
    Posts
    413

    getting the delivery report

    Hi , is there any way to switch on the delivery report after the message as been sent outside???? i need to on the delivery report...can anyone plz help me out of it.... thanks for any replies.....

  2. #2
    Regular Contributor
    Join Date
    May 2010
    Posts
    413

    Re: getting the delivery report

    i got a lnk as below...

    http://wiki.forum.nokia.com/index.ph...livery_Reports

    will this link help for my requirement???? plz help me out thanks for any replies..........

  3. #3
    Nokia Developer Moderator
    Join Date
    Mar 2003
    Location
    Lempäälä/Finland
    Posts
    29,166

    Re: getting the delivery report

    No it wont, since that one lists the already received delivery reports, if the delivery report is not on when the message is made and sent, then you will not get delivery reports for the message.

  4. #4
    Regular Contributor
    Join Date
    May 2010
    Posts
    413

    Re: getting the delivery report

    Quote Originally Posted by symbianyucca View Post
    No it wont, since that one lists the already received delivery reports, if the delivery report is not on when the message is made and sent, then you will not get delivery reports for the message.
    so wat should i do yucca??? for getting delivery report...

  5. #5
    Nokia Developer Moderator
    Join Date
    Mar 2003
    Location
    Lempäälä/Finland
    Posts
    29,166

    Re: getting the delivery report

    you should set the delivery reporting on before sending the message. Also if you use MTM APIs for sending SMS, you can set the delivery reports on on individual messages, though I have not checked whether it works if the device settings for delivery reports is off, so you would need to check that by yourself.

  6. #6
    Regular Contributor
    Join Date
    May 2010
    Posts
    413

    Re: getting the delivery report

    Quote Originally Posted by symbianyucca View Post
    you should set the delivery reporting on before sending the message. Also if you use MTM APIs for sending SMS, you can set the delivery reports on on individual messages, though I have not checked whether it works if the device settings for delivery reports is off, so you would need to check that by yourself.
    http://wiki.forum.nokia.com/index.ph..._Edition_-_MTM

    i got the above link yucca... but i think its similar to the sms operation im using yucca...can u tell me in detail how to use tat MTM APIs for switching on delivery report yucca plz thanks for any replies...

  7. #7
    Nokia Developer Moderator
    Join Date
    Mar 2003
    Location
    Lempäälä/Finland
    Posts
    29,166

    Re: getting the delivery report

    can you search tha page for DeliveryReport ?

  8. #8
    Regular Contributor
    Join Date
    May 2010
    Posts
    413

    Re: getting the delivery report

    Quote Originally Posted by symbianyucca View Post
    can you search tha page for DeliveryReport ?
    ya i done tat too in wiki and also in google its repeating the same sms operation links yucca....... in tat i can find only this page which related to delivery report

    http://wiki.forum.nokia.com/index.ph...very_Report.22


    if the above is correct then

    void CSmsHandler::SendSmsL(const TDesC& aAddr, const TDesC& aMsg)
    {
    // Create message
    RSendAsMessage message;
    message.CreateL(iSendAs, KUidMsgTypeSMS);
    CleanupClosePushL(message);

    // Prepare the message
    message.AddRecipientL(aAddr, RSendAsMessage::ESendAsRecipientTo);
    message.SetBodyTextL(aMsg);

    // Send the message
    TRequestStatus status;
    message.SendMessage(status);
    User::WaitForRequest(status);
    CSmsSettings* settings = CSmsSettings::NewL();
    settings->SetDelivery(ESmsDeliveryImmediately);
    settings->SetDeliveryReport(ETrue);

    message.Close();

    CleanupStack::Pop(); // message
    }

    the above code with the changes is correct?? yucca??
    plz help me out yucca...
    Last edited by kathir.s; 2010-09-23 at 12:28.

  9. #9
    Nokia Developer Moderator
    Join Date
    Mar 2003
    Location
    Lempäälä/Finland
    Posts
    29,166

    Re: getting the delivery report

    That would be the way, anyway, as said I'm not certain if it would overwite the actual device settings, so you need to tets it out by yourself.

  10. #10
    Regular Contributor
    Join Date
    May 2010
    Posts
    413

    Re: getting the delivery report

    Quote Originally Posted by symbianyucca View Post
    That would be the way, anyway, as said I'm not certain if it would overwite the actual device settings, so you need to tets it out by yourself.
    ya yucca im getting the delivery report yucca....but i need to use tat delivery report for further operation yucca...how to get tat ?????....its just comin for a sec and goin off.. in which variable it is stored yucca???? plz help me out yucca...

  11. #11
    Nokia Developer Moderator
    Join Date
    Mar 2003
    Location
    Lempäälä/Finland
    Posts
    29,166

    Re: getting the delivery report

    here's on example that also shows on monitoring delivery reports: http://wiki.forum.nokia.com/index.ph...t_Deleting.zip

  12. #12
    Regular Contributor
    Join Date
    May 2010
    Posts
    413

    Re: getting the delivery report

    Quote Originally Posted by symbianyucca View Post
    here's on example that also shows on monitoring delivery reports: http://wiki.forum.nokia.com/index.ph...t_Deleting.zip
    hi yucca how to run tat code yucca i dnt find any bld.inf file yucca..???? how to import it yucca??? thanks for any help.....

  13. #13
    Nokia Developer Moderator
    Join Date
    Mar 2003
    Location
    Lempäälä/Finland
    Posts
    29,166

    Re: getting the delivery report

    you can make your own, just copy the file in some other project and modify it to have the mmp file of the project in it.

  14. #14
    Regular Contributor
    Join Date
    May 2010
    Posts
    413

    Re: getting the delivery report

    Quote Originally Posted by symbianyucca View Post
    you can make your own, just copy the file in some other project and modify it to have the mmp file of the project in it.
    Hi yucca i couldn't get u... can u plz tell me in detail yucca...?????

  15. #15
    Nokia Developer Moderator
    Join Date
    Mar 2003
    Location
    Lempäälä/Finland
    Posts
    29,166

    Re: getting the delivery report

    thr bld.inf file is mainly used for telling which mmp files to include, so you can do it yourself, just check what other bld.inf files are including

Similar Threads

  1. delivery report
    By m-lamaa in forum Mobile Java Networking & Messaging & Security
    Replies: 2
    Last Post: 2008-08-08, 23:52
  2. Delivery report
    By tieutue in forum Symbian Networking & Messaging (Closed)
    Replies: 1
    Last Post: 2008-07-21, 09:29
  3. Where is my delivery report?
    By ganzoom in forum General Messaging
    Replies: 6
    Last Post: 2007-11-09, 11:29
  4. Delivery Report
    By amila325 in forum General Messaging
    Replies: 0
    Last Post: 2007-07-27, 08:43
  5. Delivery report
    By kozagayh in forum Symbian Networking & Messaging (Closed)
    Replies: 4
    Last Post: 2006-02-24, 08:41

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×