×

Discussion Board

Results 1 to 15 of 16

Threaded View

  1. #1
    Registered User
    Join Date
    Nov 2010
    Posts
    4

    Nokia X3-02 with VOIP other than Gizmo5

    Many many thanks to sudude and traud. I can confirm that my Nokia X3-02 VOIP work perfectly configured with .xml file from this post, just replacing the name of the voip provider (Justvoip), username and password.

    I tried n0kvoip but when activate the service it is rejected by justvoip....didn't work for me. I've contact and send them my *.xml file and they promised that in the next version will make some changes so I think it will work, still not tried.

    Here are some Justvoip settings:

    SIP port : 5060
    Registrar : sip.justvoip.com
    Proxy server : sip.justvoip.com
    Outbound proxy server : leave empty
    Account name : your JustVoip username
    Password : your JustVoip password
    Display name/number : your JustVoip username or voipnumber
    Stunserver (option) : stun.justvoip.com
    If you have audio problems:
    Use a STUN server (e.g. stun.justvoip.com) with port 3478 (if supported by your device)
    Use the G.711 codec

    Here is example .xml file for the phone CLICK

    Thank you again

    Here is the working .xml content:

    <?xml version="1.0"?>
    <!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN"
    "http://www.wapforum.org/DTD/prov.dtd">
    <wap-provisioningdoc version="1.1">
    <!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
    <characteristic type="BOOTSTRAP">
    <parm name="NAME" value="justvoip" />
    </characteristic>
    <!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
    <!-- Nokia S40 v72 VoIP settings, w9013 -->
    <characteristic type="APPLICATION">
    <parm name="APPID" value="w9013"/>
    <parm name="PROVIDER-ID" value="justvoip"/>
    <parm name="NAME" value="justvoip"/>
    <parm name="TO-NAPID" value="INTERNET"/>
    <parm name="TO-APPREF" value="justvoip_SIP_settings"/>
    <parm name="SMPORT" value="16384"/>
    <parm name="EMPORT" value="32766"/>
    <parm name="MEDIAQOS" value="46"/>
    <parm name="SECURECALLPREF" value="0"/>
    <parm name="RTCP" value="0"/>
    <parm name="MOMAXALERT" value="45"/>
    <parm name="MTMAXALERT" value="30"/>

    <!-- AMR NB -->
    <characteristic type="CODEC">
    <parm name="MEDIASUBTYPE" value="0"/>
    <parm name="PRIORITYINDEX" value="0"/>
    <parm name="OCTET-ALIGN"/>
    <parm name="VAD"/>
    </characteristic>

    <!-- G.729 with default values -->
    <characteristic type="CODEC">
    <parm name="MEDIASUBTYPE" value="10"/>
    <parm name="PRIORITYINDEX" value="1"/>
    <parm name="ANNEXB"/>
    </characteristic>

    <!-- G711 a-law with default values -->
    <characteristic type="CODEC">
    <parm name="MEDIASUBTYPE" value="3"/>
    <parm name="PRIORITYINDEX" value="2"/>
    <parm name="VAD"/>
    </characteristic>

    <!-- G711 u-law with default values -->
    <characteristic type="CODEC">
    <parm name="MEDIASUBTYPE" value="4"/>
    <parm name="PRIORITYINDEX" value="3"/>
    <parm name="VAD"/>
    </characteristic>

    <!-- G.726-40 with default values -->
    <characteristic type="CODEC">
    <parm name="MEDIASUBTYPE" value="5"/>
    <parm name="PRIORITYINDEX" value="4"/>
    <parm name="VAD"/>
    </characteristic>

    <!-- G.726-32 with default values -->
    <characteristic type="CODEC">
    <parm name="MEDIASUBTYPE" value="6"/>
    <parm name="PRIORITYINDEX" value="5"/>
    <parm name="VAD"/>
    </characteristic>

    <!-- G.726-24 with default values -->
    <characteristic type="CODEC">
    <parm name="MEDIASUBTYPE" value="7"/>
    <parm name="PRIORITYINDEX" value="6"/>
    <parm name="VAD"/>
    </characteristic>

    <!-- G.726-16 with default values -->
    <characteristic type="CODEC">
    <parm name="MEDIASUBTYPE" value="8"/>
    <parm name="PRIORITYINDEX" value="7"/>
    <parm name="VAD"/>
    </characteristic>

    <!-- CN Comfort noise with default values -->
    <characteristic type="CODEC">
    <parm name="MEDIASUBTYPE" value="9"/>
    <parm name="PRIORITYINDEX" value="8"/>
    </characteristic>

    </characteristic>

    <!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
    <!-- NAT/FW settings, w902E -->
    <characteristic type="APPLICATION">
    <parm name="APPID" value="w902E"/>
    <parm name="NAME" value="NAT/FW Traversal settings"/>
    <characteristic type="NW">
    <parm name="APPREF" value="justvoip_NAT_FW_settings"/>
    <parm name="DOMAIN" value="sip.justvoip.com"/>
    <parm name="STUNSRVADDR" value="0.0.0.0"/>
    <parm name="STUNSRVPORT" value="3478"/>
    <parm name="NATREFRESHTCP" value="30"/>
    <parm name="NATREFRESHUDP" value="20"/>
    </characteristic>
    <characteristic type="NATIAP">
    <parm name="TO-NAPID" value="INTERNET"/>
    <parm name="REFRESHTCP" value="1200"/>
    <parm name="REFRESHUDP" value="28"/>
    <parm name="STUNRETRANSMIT" value="250"/>
    </characteristic>
    </characteristic>

    <!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
    <!-- SIP settings, w9010 -->
    <characteristic type="APPLICATION">
    <parm name="APPID" value="w9010"/>
    <parm name="APPREF" value="justvoip_SIP_settings"/>
    <parm name="PROVIDER-ID" value="justvoip"/>
    <parm name="TO-NAPID" value="INTERNET"/>
    <parm name="PTYPE" value="IETF"/>
    <parm name="PUID" value="sip:USERNAME@justvoip.com"/>
    <parm name="APROTOCOL" value="UDP" />
    <!-- Outbound settings -->
    <characteristic type="APPADDR">
    <parm name="LR"/>
    <parm name="ADDR" value="sip.justvoip.com"/>
    <characteristic type="PORT">
    <parm name="PORTNBR" value="5060" />
    </characteristic>
    </characteristic>
    <!-- Outbound credentials -->
    <characteristic type="APPAUTH">
    <parm name="AAUTHNAME" value="USERNAME"/>
    <parm name="AAUTHSECRET" value="PASSWORD"/>
    <parm name="AAUTHDATA" value=""/>
    <parm name="AAUTHTYPE" value="HTTP-DIGEST" />
    </characteristic>
    <!-- Registrar location and credentials -->
    <characteristic type="RESOURCE">
    <parm name="URI" value="sip.justvoip.com"/>
    <parm name="AAUTHNAME" value="USERNAME"/>
    <parm name="AAUTHSECRET" value="PASSWORD"/>
    <parm name="AAUTHDATA" value=""/>
    <parm name="AAUTHTYPE" value="HTTP-DIGEST" />
    </characteristic>
    </characteristic>

    <!-- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX-->
    </wap-provisioningdoc>
    Last edited by stambo98; 2011-01-02 at 00:14.

Similar Threads

  1. Nokia 6300i with Voip - other than Gizmo5
    By Soegaard in forum VoIP
    Replies: 125
    Last Post: 2010-12-22, 08:29
  2. Replies: 1
    Last Post: 2010-11-08, 14:38
  3. Nokia x3-02 touch and type
    By chaitanyabhargav27 in forum General Development Questions
    Replies: 1
    Last Post: 2010-10-06, 08:09
  4. Issues with Mp3 progressive_download Playing on S40 V3FP5 with Nokia X3-02
    By vngwcc in forum Mobile Java Media (Graphics & Sounds)
    Replies: 0
    Last Post: 2010-10-05, 18:53
  5. Nokia X3-02, which SDK, and what about the soft keys?
    By levon.levonian in forum Mobile Java Tools & SDKs
    Replies: 2
    Last Post: 2010-08-24, 00:19

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×