×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Super Contributor
    Join Date
    Mar 2003
    Posts
    1,733

    Help me with Nokia 22 dialing number in pulse mode

    Posted by Anatoliy Golovanov, warp@ukr.net
    on April 30, 2002 at 16:30



    My Nokia 22 connected to PBX (Panasonic TA616) extention line. I dial number from my mobile phone to nokia 22, hear signal PBX and dialing any extention number, but my PBX worked correctly with telephone in pulse mode.
    My nokia 22 worked in DTMF mode.
    How do on nokia 22 pulse mode.
    I have Nokia 22 Configurator Software and cabel.

  2. #2
    Super Contributor
    Join Date
    Mar 2003
    Posts
    1,733

    RE: Help me with Nokia 22 dialing number in pulse mode

    Posted by Forum Nokia Developer Support,
    on May 07, 2002 at 08:32

    The dialing method that N22 will use in case of incoming call is selected with Configurator program. Select page "Extension mode settings" and set the "Dialing mode" to pulse mode. Now the digits that are recieved by N22 from remote end are detected (by N22) and then sent to PBX as pulse dialing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •