×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Super Contributor
    Join Date
    Mar 2003
    Posts
    1,733

    CARD Phone 2.0 mdm file for lotus notes 5

    Posted by Ricky Wong, rwkkk1@hongkong.com
    on January 30, 2002 at 03:53

    I am looking for a modem file for Nokia Card phone 2.0 under Lotus Notes 5.
    I was fine for using lotus notes 4.6 with npn2.mdm. Once I upgrade to notes 5 the card phone couldn't work at all.

  2. #2
    Super Contributor
    Join Date
    Mar 2003
    Posts
    1,733

    RE: CARD Phone 2.0 mdm file for lotus notes 5

    Posted by m t, marcot@jumpy.it
    on May 07, 2002 at 15:55



    Try to use this script, named nsuite.mdm
    This is the one we use



    ; .Nokia Data Suite
    ; {NSUITE.MDM}
    ;
    ; Created: 20/10/94 - Mark A. Lamb - Lotus cc:Mail Support (UK)
    ; Neal Quinlan - Notes Support (UK)
    ; Modified: 2/12/94 - Petri Heinonen - Nokia Mobile Phones (FIN)
    ; 29/11/96 - Numeric responses added (ATV0)
    ; 03/01/00 - Modified to Nokia Data Suite
    ; 03/01/00 - Jarno Rekonius - Nokia Mobile Phones (FIN)
    ;
    ; NB. This .MDM file has not been officially tested by Lotus Development Ltd
    ; It can be used freely but does not legally warrant support until
    ; such at time that it is officially tested and authorised by Lotus.


    [attributes]

    MODELS=Nokia Data Suite (auto)
    NULL MODEM=0
    MAXIMUM SPEED=19200
    DEFAULT SPEED=19200
    FIXED SPEED=1

    [cc:Commands]

    CCSETUP=AT&F
    CCSETUP=ATE0V1
    CCSETUP=ATQ0X5S10=80S7=55S35=7&C1&D2&S1
    BLIND DIAL=ATX1
    ANSWER RINGS OFF=ATS0=0
    ANSWER RINGS ON=ATS0=1
    CCHANGUP=
    MODEM BUFFER=38
    CCRTS/CTS ENABLED=ATS34=2
    CCRTS/CTS IGNORED=ATS34=0

    [commands]

    ESCAPE=+++
    ATTENTION=ATE0V1
    HANGUP=ATH0
    SETUP=AT&F
    SETUP=ATE0V0
    SETUP=ATQ0&D2&C1S0=0S7=60S35=7X5
    VOLUME OFF=ATM0
    VOLUME LOW=ATM1L1
    VOLUME MEDIUM=ATM1L2
    VOLUME HIGH=ATM1L3
    RTS/CTS ENABLED=ATS34=2
    RTS/CTS IGNORED=ATS34=0
    ANSWER=ATA
    MANUAL DIAL=ATX3S9=1D,
    AUTO DIAL SETUP=ATS9=6
    AUTO PULSE DIAL=ATDP
    AUTO TONE DIAL=ATDT
    AUTO DIAL SUFFIX=,

    [responses]

    OK=OK
    OK=0
    BUSY=BUSY
    BUSY=DELAYED
    BUSY=13
    NO ANSWER=NO ANSWER
    NO ANSWER=8
    NO CARRIER=NO CARRIER
    NO CARRIER=4
    NO DIALTONE=NO DIALTONE
    NO DIALTONE=NO DIAL TONE
    ERROR=ERROR
    ERROR=4
    RING=RING
    RING=2
    CONNECT, 14400=CONNECT 14400
    CONNECT, 14400=14
    CONNECT, 9600=CONNECT 9600
    CONNECT, 9600=12
    CONNECT, 4800=CONNECT 4800
    CONNECT, 4800=11
    CONNECT, 2400=CONNECT 2400
    CONNECT, 2400=10
    CONNECT, 1200=CONNECT 1200
    CONNECT, 1200=5

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •