×

Discussion Board

Results 1 to 8 of 8
  1. #1
    Regular Contributor
    Join Date
    Apr 2008
    Posts
    95

    Symbian Belle compilation issue

    I am using Carbide v3.2.0 and Nokia_Symbian_Belle_SDK_v0.6.
    I have activeperl 5.14.x installed and is in path.

    I am getting following error.


    ***Invoking bldmake command
    perl.exe -S bldmake.pl bldfiles
    Can't locate E32env.pm in @INC (@INC contains: C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v0.6_2\epoc32\tools\ C:/Perl/site/lib C:/Perl/lib .) at C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v0.6_2\epoc32\tools/bldmake.pl line 37.
    BEGIN failed--compilation aborted at C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v0.6_2\epoc32\tools/bldmake.pl line 37.

    === BLDMAKE Command failed with error code 2 ===
    ***Stopping. Check the Problems view or Console output for errors.

    ***Errors were detected in build. See the Problems or Console view for details.

    Total Time: 0 sec

    Any pointers would really help?

  2. #2
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,674

    Re: Symbian Belle compilation issue

    Recently Symbian SDK-s from Nokia have started to contain the required Active Perl version.
    I decided to install it now, it has just started, right now it says "Nokia Symbian Belle SDK 0.6 with ActivePerl 5.6.1 635 is preparing installation". So for you it might be a good start to get rid of ActivePerl 5.14.x, and install the correct one, which is bundled with the SDK.

    EDIT: the installer of the required Active Perl is deployed to C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v0.6\epoc32\tools\distrib\ActivePerl-5.6.1.635-MSWin32-x86.msi (assuming the default location)
    Last edited by wizard_hu_; 2011-10-10 at 12:58.

  3. #3
    Registered User
    Join Date
    Mar 2011
    Posts
    29

    Re: Symbian Belle compilation issue

    I am using Carbide v2.7.0 and Nokia_Symbian_Belle_SDK_v0.6, activeperl installer default with the SDK 5.6.1 build 635.
    I am also having the same problem instead i have re installed the SDK and Active pearl many times.
    Error is...



    ***Invoking bldmake command
    perl.exe -S bldmake.pl bldfiles winscw
    Can't locate E32env.pm in @INC (@INC contains: C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v0.6\epoc32\tools\ E:/Perl/lib E:/Perl/site/lib .) at C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v0.6\epoc32\tools/bldmake.pl line 37.
    BEGIN failed--compilation aborted at C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v0.6\epoc32\tools/bldmake.pl line 37.

    === BLDMAKE Command failed with error code 2 ===
    ***Stopping. Check the Problems view or Console output for errors.

    ***Errors were detected in build. See the Problems or Console view for details.

    Total Time: 0 sec
    --------------------------------------- AND ---------------------------------------------------------


    The command line output for perl -v and path is ......

    **************************************
    C:\>perl -v

    This is perl, v5.6.1 built for MSWin32-x86-multi-thread
    (with 1 registered patch, see perl -V for more detail)

    Copyright 1987-2001, Larry Wall

    Binary build 635 provided by ActiveState Corp. http://www.ActiveState.com
    Built 15:34:21 Feb 4 2003


    Perl may be copied only under the terms of either the Artistic License or the
    GNU General Public License, which may be found in the Perl 5 source kit.

    Complete documentation for Perl, including FAQ lists, should be found on
    this system using `man perl' or `perldoc perl'. If you have access to the
    Internet, point your browser at http://www.perl.com/, the Perl Home Page.


    C:\>PATH
    PATH=E:\Perl\bin\;C:\Program Files\Common Files\Symbian\tools;C:\Program Files\C
    odeSourcery\bin;C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v0.6\epoc32\tools\sbs\b
    in;C:\Program Files\CSL Arm Toolchain\bin;E:\Perl\bin;C:\Program Files\CSL Arm T
    oolchain\bin;E:\Perl\bin

    **************************************

    Thanks in advance.
    Last edited by harshalsengar; 2011-10-14 at 14:29. Reason: output was showing url

  4. #4
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,674

    Re: Symbian Belle compilation issue

    I have not tried to do anything with the SDK (except installation), but the release notes say
    Quote Originally Posted by C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v0.6\releasenotes.txt
    Deprecated Tools:
    ================
     ABLD tool (SBSv1).
    so bldmake+abld probably will not work. In fact there is no bldmake.bat any more (though bldmake.pl is still present).
    Check the same file and GCCE_readme.txt (next to it) in order to find out how SBSv2 can be configured.

  5. #5
    Nokia Developer Moderator
    Join Date
    Sep 2004
    Location
    Tampere, Finland
    Posts
    11,359

    Re: Symbian Belle compilation issue

    SBSv2 (aka Raptor) and GCCE should be configured by default, just make sure to import yout projects in Carbide.c++ so that it uses SBSv2.
    -- Lucian

    If you are not yet a DVLUP member it is time to correct that mistake :) Click here to join: http://www.dvlup.com/lucian/Invite

  6. #6
    Registered User
    Join Date
    Mar 2011
    Posts
    29

    Re: Symbian Belle compilation issue

    Thank you for reply Wizard and Itomuta... I am trying according to you...

    selecting SBSv2 builder in importing project ...... shows

    *********
    SBS version cannot be determined, some SBS functionality may not work. Please check your SBS installation.

    ********

    on File Import Wizard header...

  7. #7
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,674

    Re: Symbian Belle compilation issue

    I do not have the SDK here and now, but those files explain some thing you can check/set manually if the automatic configuration has not succeeded.

  8. #8
    Registered User
    Join Date
    Nov 2005
    Posts
    42

    Re: Symbian Belle compilation issue

    Try changing your carbide workspace. I had the same problem and everything was in the correct place. Then I changed the workspace and it worked.

Similar Threads

  1. Symbian Belle SDK (beta) released
    By ltomuta in forum Symbian Tools & SDKs
    Replies: 55
    Last Post: 2012-06-01, 09:07
  2. Why called Symbian Anna, Symbian Belle?
    By patrickz in forum Symbian
    Replies: 7
    Last Post: 2011-08-25, 11:03

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×