×

Discussion Board

Results 1 to 4 of 4
  1. #1
    Registered User
    Join Date
    Oct 2011
    Posts
    2

    CODA not working for Carbide C++ 3.3.0 and N97, 5233

    It seems nowadays less people develop for S60 devices...while searching on net, most of the discussions were years old.

    I recently installed the latest version of Carbide C++ 3.3.0, and S60v5 SDK v1.0. in emulator mode, applications work fine, but on device debugging does not work.

    I also installed Nokia PC suite and Nokia ovi PC suite, they worked fine too.

    Here is my problem:
    I successfully installed CODA Version 4.0.23 (using driver: legacy(4.0)(running from C: ) on my N97 device.
    N97's software version is v22.0.110, date:11-06-10.
    while i plug USB cable to N97, CODA is automatically launched and display the following information:
    Status: connected
    Connection: USB
    Port: 0

    in Carbide C++, however, i got the following error:
    Connection Type status description
    N97 USB Not Ready Debug service unavailable
    Debug(CODA) Not accessible Connection type is supported, but is missing some settings.
    Trace Not accessible null


    i tried to test with new connections, but it also failed.
    here is my control panel image:

    it shows N97 use vCom9 to communicate with my PC.
    here is the new connection test result:



    anyone has ideas about what i am missing? for almost there are no posts discussing this issue, i doubt if it is just a stupid configuration problem?

    btw, i also tried Carbide C++ 2.7 and TRK tools for debugging, and it seemed worse. TRK tools can be installed to N97, but can not run. while i tried to run it, it display some error messages:
    Error in connecting to TRK server. please restart the phone and try.
    App TRK: 不支持此功能(the function is not supported?)

  2. #2
    Super Contributor
    Join Date
    Mar 2008
    Posts
    1,481

    Re: CODA not working for Carbide C++ 3.3.0 and N97, 5233

    Hi,

    I have been using same version of Carbide like you with Belle, it looks it works for me.
    I have not used N97 with 3.3.0 but I have carbide 2.7 in another machine and there is 5th ed SDK there.
    I have used TRK there and it work. May be you can try that

  3. #3
    Registered User
    Join Date
    Oct 2011
    Posts
    2

    Re: CODA not working for Carbide C++ 3.3.0 and N97, 5233

    Thank you for the info. Unfortunately, I don't have belle to test with my dev env.

  4. #4
    Registered User
    Join Date
    Mar 2012
    Posts
    1

    Re: CODA not working for Carbide C++ 3.3.0 and N97, 5233

    install err version! TRK 3.2.7 is correct

Similar Threads

  1. CODA/USB not working after Anna-update
    By virne in forum [Archived] Qt SDKs and Tools
    Replies: 1
    Last Post: 2011-12-01, 21:12
  2. CODA
    By waelfarouk in forum [Archived] Qt SDKs and Tools
    Replies: 2
    Last Post: 2011-11-27, 07:41
  3. where to get CODA for QtSdk 1.1.3 ?
    By vdharankar in forum [Archived] Qt SDKs and Tools
    Replies: 4
    Last Post: 2011-09-21, 14:05

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •