×

Discussion Board

Results 1 to 6 of 6
  1. #1
    Registered User
    Join Date
    Sep 2011
    Location
    Lebanon
    Posts
    59

    My App crashes on symbian belle (Nokia 700)

    Hi,
    I developed an app targeting symbian ^1, symbian ^3 ( including belle) and meego
    my app utilizes multimedia and it works fine for all devices except of nokia 700 (belle).
    It runs well but after several open and exit for the app, it exits with:
    Thread has crashed: A data abort exception has occurred accessing 0x0.
    Process has finished.
    And it is no more runnable until I restart the phone.
    What could be the problem?
    Thanks
    Success is when you realize obstacles you face are challenges to help you become better - and your response equals the challenge.

  2. #2
    Super Contributor
    Join Date
    Oct 2008
    Location
    INDIA
    Posts
    2,326

    Re: My App crashes on symbian belle (Nokia 700)

    Yes, it's true it will not work.
    If you want to develop application for Belle, it should be build separately for belle devices.

    You have to download Qt 1.1.4 using online installer : https://www.developer.nokia.com/info...f8/Qt_SDK.html

    regards,
    rahul

  3. #3
    Registered User
    Join Date
    Sep 2011
    Location
    Lebanon
    Posts
    59

    Re: My App crashes on symbian belle (Nokia 700)

    Yes I am building it separately (Qt 4.4 for symbian belle).
    Success is when you realize obstacles you face are challenges to help you become better - and your response equals the challenge.

  4. #4
    Nokia Developer Moderator
    Join Date
    Mar 2003
    Location
    Lempäälä/Finland
    Posts
    29,167

    Re: My App crashes on symbian belle (Nokia 700)

    then do check the actual panic code: http://www.developer.nokia.com/Commu...ded_panic_code

    Also you could put some breakpoints to see where it is crashing at.

  5. #5
    Registered User
    Join Date
    Sep 2011
    Location
    Lebanon
    Posts
    59

    Re: My App crashes on symbian belle (Nokia 700)

    ok this is the debug output:
    --- token barrier ---
    dNOTE: INFERIOR RUN REQUESTED
    dState changed from InferiorStopOk(14) to InferiorRunRequested(10).
    sStep next requested...
    <435sal next,0x500218
    <436-exec-next
    Thread 1596 stopped: 'Step':
    >&"sal next,0x500218\n"
    >~"Traceback (most recent call last):\n"
    >~" File \"C:/QtSDK2/QtCreator/share/qtcreator/dumper/bridge.py\", line 19, in invoke\n"
    >~" output = func(args)\n"
    >~" File \"C:/QtSDK2/QtCreator/share/qtcreator/dumper/dumper.py\", line 839, in sal\n"
    >~" (cmd, addr) = arg.split(\",\")\n"
    >~"NameError: global name 'arg' is not defined\n"
    >&"Error occurred in Python command: global name 'arg' is not defined\n"
    >435^error,msg="Error occurred in Python command: global name 'arg' is not defined"
    >436^running
    dNOTE: INFERIOR RUN OK
    dState changed from InferiorRunRequested(10) to InferiorRunOk(11).
    >*running,thread-id="1"
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Step':
    Thread 1596 stopped: 'Exception': A data abort exception has occurred accessing 0x0.
    >*stopped,reason="signal-received",signal-name="SIGSEGV",signal-meaning="Segmentation fault",frame={addr="0x80566b38",func="??",args=[]},thread-id="1",stopped-threads="all"
    dNOTE: INFERIOR SPONTANEOUS STOP
    dState changed from InferiorRunOk(11) to InferiorStopOk(14).
    dHANDLING SIGNALSIGSEGV
    sStopped: Segmentation fault (Signal SIGSEGV).
    <437-stack-list-frames
    >437^done,stack=[frame={level="0",addr="0x80566b38",func="??"},frame={level="1",addr="0x7d584442",func="??"},frame={level="2",addr="0x7d584442",func="??"}]
    <438-stack-select-frame 0
    <439disassemble 0x80566b38
    <440bb options:fancy,autoderef vars: expanded: typeformats: formats: watchers:
    >438^done
    >&"disassemble 0x80566b38\n"
    >&"No function contains specified address.\n"
    >439^error,msg="No function contains specified address."
    <441disassemble 0x80566b24,0x80566b9c
    >&"bb options:fancy,autoderef vars: expanded: typeformats: formats: watchers:\n"
    >~"XXX: BLOCK IN FRAME NOT ACCESSIBLE: Cannot locate object file for block.\n"
    >~"\n"
    >~"data=[,],typeinfo=[]\n"
    >440^done
    dDISCARDING JUNK AT BEGIN OF RESPONSE: XXX: BLOCK IN FRAME NOT ACCESSIBLE: Cannot locate object file for block.
    d
    d
    <Rebuild Watchmodel 30>
    sFinished retrieving data
    >&"disassemble 0x80566b24,0x80566b9c\n"
    >~"Dump of assembler code from 0x80566b24 to 0x80566b9c:\n"
    >~" 0x80566b24:\t"
    >&"Cannot access memory at address 0x80566b38\n"
    >441^error,msg="Cannot access memory at address 0x80566b38"
    sDisassembler failed: Cannot access memory at address 0x80566b38
    --- token barrier ---
    dNOTE: INFERIOR RUN REQUESTED
    dState changed from InferiorStopOk(14) to InferiorRunRequested(10).
    sStep next requested...
    <442sal next,0x80566b38
    <443-exec-next
    >&"sal next,0x80566b38\n"
    >~"Traceback (most recent call last):\n"
    >~" File \"C:/QtSDK2/QtCreator/share/qtcreator/dumper/bridge.py\", line 19, in invoke\n"
    >~" output = func(args)\n"
    >~" File \"C:/QtSDK2/QtCreator/share/qtcreator/dumper/dumper.py\", line 839, in sal\n"
    >~" (cmd, addr) = arg.split(\",\")\n"
    >~"NameError: global name 'arg' is not defined\n"
    >&"Error occurred in Python command: global name 'arg' is not defined\n"
    >442^error,msg="Error occurred in Python command: global name 'arg' is not defined"
    >443^error,msg="Cannot find bounds of current function"
    dNOTE: INFERIOR RUN FAILED
    dState changed from InferiorRunRequested(10) to InferiorRunFailed(12).
    dState changed from InferiorRunFailed(12) to InferiorStopOk(14).
    --- token barrier ---
    dNOTE: INFERIOR RUN REQUESTED
    dState changed from InferiorStopOk(14) to InferiorRunRequested(10).
    sStep next instruction requested...
    <444-exec-next-instruction
    wError while stepping: 'functionality is not supported' Code: 1 ('Symbian', code: 4294967291) (fallback to 'continue')
    Thread 1596 stopped: 'Exception': A data abort exception has occurred accessing 0x0.
    >444^running
    dNOTE: INFERIOR RUN OK
    dState changed from InferiorRunRequested(10) to InferiorRunOk(11).
    >*running,thread-id="all"
    >*stopped,reason="signal-received",signal-name="SIGSEGV",signal-meaning="Segmentation fault",frame={addr="0x80566b38",func="??",args=[]},thread-id="1",stopped-threads="all"
    dNOTE: INFERIOR SPONTANEOUS STOP
    dState changed from InferiorRunOk(11) to InferiorStopOk(14).
    dHANDLING SIGNALSIGSEGV
    sStopped: Segmentation fault (Signal SIGSEGV).
    <445-stack-list-frames
    >445^done,stack=[frame={level="0",addr="0x80566b38",func="??"},frame={level="1",addr="0x7d584442",func="??"},frame={level="2",addr="0x7d584442",func="??"}]
    <446-stack-select-frame 0
    <447disassemble 0x80566b38
    <448bb options:fancy,autoderef vars: expanded: typeformats: formats: watchers:
    >446^done
    >&"disassemble 0x80566b38\n"
    >&"No function contains specified address.\n"
    >447^error,msg="No function contains specified address."
    <449disassemble 0x80566b24,0x80566b9c
    >&"bb options:fancy,autoderef vars: expanded: typeformats: formats: watchers:\n"
    >~"XXX: BLOCK IN FRAME NOT ACCESSIBLE: Cannot locate object file for block.\n"
    >~"\n"
    >~"data=[,],typeinfo=[]\n"
    >448^done
    dDISCARDING JUNK AT BEGIN OF RESPONSE: XXX: BLOCK IN FRAME NOT ACCESSIBLE: Cannot locate object file for block.
    d
    d
    <Rebuild Watchmodel 31>
    sFinished retrieving data
    >&"disassemble 0x80566b24,0x80566b9c\n"
    >~"Dump of assembler code from 0x80566b24 to 0x80566b9c:\n"
    >~" 0x80566b24:\t"
    >&"Cannot access memory at address 0x80566b38\n"
    >449^error,msg="Cannot access memory at address 0x80566b38"
    sDisassembler failed: Cannot access memory at address 0x80566b38
    Success is when you realize obstacles you face are challenges to help you become better - and your response equals the challenge.

  6. #6
    Nokia Developer Moderator
    Join Date
    Mar 2003
    Location
    Lempäälä/Finland
    Posts
    29,167

    Re: My App crashes on symbian belle (Nokia 700)

    I can not remember asking that, thus can you re-read what I actually asked for.

Similar Threads

  1. Replies: 3
    Last Post: 2013-11-24, 18:22
  2. emulator Belle o.6 SDK crashes to desktop
    By kompotFX in forum Symbian Tools & SDKs
    Replies: 3
    Last Post: 2011-11-13, 13:02
  3. problem with nokia 701 symbian belle ...
    By super_rider in forum General Development Questions
    Replies: 1
    Last Post: 2011-11-04, 17:45

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×