×

Discussion Board

Page 4 of 7 FirstFirst 1234567 LastLast
Results 46 to 60 of 102
  1. #46
    Registered User
    Join Date
    May 2012
    Posts
    24

    Committed text differs from the one shown in input field

    PRECONDITIONS:
    PR1.2, PR1.3
    N9
    I used the conventional virtual keyboard. Tested also by Swype virtual keyboard.

    STEPS LEADING TO THE PROBLEM:
    Start e.g. website touch.facebook.com* Nokia Browser. Type some content in an input field. Tap in the middle of the text and remove some characters by backspace. You may also type more characters in the middle.

    EXPECTED OUTCOME:
    After committing the text it should look like the one in input field.

    ACTUAL OUTCOME:
    Some characters are undeleted and/or missing.

    FREQUENCY OF OCCURRENCE:
    Sometimes

    *) Check in seems to work better when using this website compared to m.facebook.com
    Last edited by jarno76; 2012-07-05 at 22:17. Reason: Added Swype

  2. #47
    Registered User
    Join Date
    Mar 2012
    Posts
    2

    Re: Nokia N9 default browser buggy for certain sites.

    PRECONDITIONS:
    PR1.3 40.2012.21-3_PR_001
    N9
    Got a mail for exchange account configured and trying to use it.

    STEPS LEADING TO THE PROBLEM:
    Got a MfE-account set up.
    Receive a mail, and try to forward it to someone.

    EXPECTED OUTCOME:
    All mail history will be forwarded.
    ACTUAL OUTCOME:
    All mail history is left out. Only thing inserted in the forwarded mail is my mail signature and the subject.

    FREQUENCY OF OCCURRENCE:
    All the time.


    Edit: This was also evident on PR1.2

    Edit2: A "workaround" is to press reply and change the recipients. This is of course ridiculous, but that's how you have to do it.
    When forward is pressed it actually does attach a .eml attachment to the email. But that does not make it readable on either Lotus Notes, or MS Outlook, or Gmail (the once i've been able to test)
    Last edited by larsxsamuelsson; 2012-07-06 at 11:36.

  3. #48
    Registered User
    Join Date
    May 2011
    Posts
    5

    [PR1.3] URL cleared from the address bar when browser failed to load a site

    OPERATING SYSTEM:
    N9 40.2012.21-3 (PR1.3)

    STEPS LEADING TO THE PROBLEM:

    1.
 Launch Web (stock browser), type a bad url or make network unavailable so the browser cannot load the url content successfully.
    2. A dialog appears to tell users the site cannot be loaded.
    3. Click 'ok' to bypass the dialog.

    EXPECTED OUTCOME:

    Url remains in the address bar, and users can conveniently click refresh icon to try reloading the site again.

    ACTUAL OUTCOME:

    Url disappears from the address bar, no refresh icon whatsoever. Users need to re-type the entire url to reload the site.

    FREQUENCY OF OCCURRENCE:
    Always

    This is a regression in PR1.3, PR1.0-PR1.2 have doesn't clear url when sites failed to load.

  4. #49
    Registered User
    Join Date
    May 2010
    Posts
    43

    Re: Harmattan Bug Reports

    OPERATING SYSTEM:
    PR1.3)

    STEPS LEADING TO THE PROBLEM:

    1.
 Select Portuguese (or any language that uses Accents in their words most likely) European and enable autocorrection
    2. Type "ja", "so" or "ha" - words that have no meaning in Portuguese
    3. See autocorrection suggestion

    EXPECTED OUTCOME:

    "ja" is autocorrected to "já"

    ACTUAL OUTCOME:

    Autocorrection searches for adjacent words. "ja" for example is autocorrected to "na"

    FREQUENCY OF OCCURRENCE:
    Always

    This is a regression in PR1.3, PR1.0-PR1.2 autocorrected this correctly.

    Example:
    PR 1.2
    Typed: ja
    Autocorrection: já

    PR 1.3
    Typed: ja
    Autocorrection: na (searches for adjacent word)

    Other words that don't autocorrect:
    nao > não
    so > só
    ha > há
    bebedo > bêbedo
    cao > cão

    However, some words do autocorrect:
    amanha > amanhã

    All the words exemplified do not mean anything in their non-accented forms. This is VERY frustrating!

  5. #50
    Nokia Developer Champion
    Join Date
    Aug 2010
    Location
    Ahmedabad
    Posts
    299

    Re: More ways to lock phone wanted

    OPERATING SYSTEM:
    N9 40.2012.21-3 (PR1.3)

    Bug : 1
    1. Start playing some musing.
    2. Lock screen
    3. Double tap or press lock/unlock button.
    4. You will not see current date and time in the screen if music is already playing.

    Bug : 2

    Internet access is not possible when using behind proxy server and the proxy is protected with username and password.

  6. #51
    Registered User
    Join Date
    Jul 2012
    Posts
    1

    Angry Alarms lost on reboot

    Since PR 1.2, whenever the device reboots, all alarms set in the clock app are lost.

  7. #52
    Registered User
    Join Date
    Apr 2012
    Posts
    2

    Swipe duplicating started words

    Release: Nokia N9 PR 1.2 as well as Nokia N9 PR 1.3
    Frequency: Always

    REPRODUCE:
    - use the inbuilt web browser and go to http://www.google.com
    - enter a long word using swipe into the search box (in my example I used Francisco)
    - Place the cursor into the middle of the word (in my example, I placed it behind the "c")
    - if you tab the word multiple times (to try to place the cursor just after the c because the screen is too small)
    - the word starts getting replicated. The more you try to place the cursor at the right place to even delete the extra characters/words, it will keep replicating

    ACTUAL RESULT:
    instead of placing the cursor at the right location, words get replicated and it becomes impossible to delete the words. on every tab, the word is replicated even more

    EXPECTED RESULT:
    Cursor is placeable so i can delete mistyped characters and words

  8. #53
    Registered User
    Join Date
    Apr 2012
    Posts
    2

    Standby Screen not working as expected on reboot

    Release: Nokia N9 PR 1.3
    Frequency: Always

    REPRODUCE:
    - enable standby screen (ensure that time and operator logo are shown by testing this)
    - switch off phone
    - switch on phone
    - lock phone
    - standby screen is all black

    ACTUAL RESULT:
    standby screen is all black and does not show the clock or operator logo

    EXPECTED RESULT:
    standby screen is working properly displaying the operator logo and clock

    KNOWN WORKAROUND:
    go to setting/device/display and disable the standby screen and enable it again. now the clock and logo are shown until the next reboot

  9. #54
    Registered User
    Join Date
    Jul 2012
    Posts
    1

    New IMAP e-mail not displayed in "recent messages" view

    FIRMWARE VERSION: PR1.3 (regression from PR1.2)

    BUG DESCRIPTION:

    New e-mail from IMAP accounts does not appear on main "recent messages" view in e-mail application upon reception and the unread e-mail counter (bubble) is not updated. Notification on lock-screen and events view however operates as expected.
    Opening "all messages" view shows the unread IMAP mails correctly.
    This functionality works as expected with POP accounts and the built-in Gmail account type.

    EXPECTED OUTCOME:

    E-mail from any type of account should be handled the same way and update unread counts and "recent messages" view.

    INVESTIGATION:
    Tested with different e-mail provider IMAP accounts. Removed and re-configured accounts. Tried different combinations of IMAP and POP/Gmail accounts. Re-installed operating system and started from clean-slate.

    FREQUENCY OF OCCURRENCE:
    Always

    This is a regression in PR1.3, PR1.0-PR1.2 operated correctly. How did this pass QA?

  10. #55
    Registered User
    Join Date
    Jul 2012
    Posts
    4

    Re: Harmattan Bug Reports

    PRECONDITIONS

    PR1.2,PR1.3 firmware
    Language selection on N9: Traditional Chinese(Hong Kong)

    STEPS LEADING TO THE PROBLEM:

    1. Open Facebook application

    EXPECTED OUTCOME:

    1.) Facebook open in Traditional Chinese interface.

    ACTUAL OUTCOME:

    1.) Facebook open in English interface.

    FREQUENCY OF OCCURRENCE:
    Permanently.

    Comment:
    It behave expected in PR1.1 and It behave different after PR1.1
    Last edited by michaelmhk; 2012-07-12 at 15:29. Reason: Wrong title

  11. #56
    Registered User
    Join Date
    May 2012
    Posts
    24

    Phone is stuck in silent mode and vibration

    PRECONDITIONS

    PR1.3 firmware

    STEPS LEADING TO THE PROBLEM:

    No idea.

    EXPECTED OUTCOME:

    You should be able to set alarm mode and have no vibration on all the time. The alarm mode switcher should not be visible all the time.

    ACTUAL OUTCOME:

    Phone vibrates all the time, except when in screen lock. Phone is stuck in silent mode. See the video for more specific information: http://youtu.be/VGI9YMJ24TU

    FREQUENCY OF OCCURENCE:
    Once so far

    WORKAROUND:
    Restart phone

  12. #57
    Registered User
    Join Date
    May 2012
    Posts
    24

    Auto white balance tends to produce too bluish colors in certain conditions

    PRECONDITIONS

    PR1.2 or PR1.3 firmware

    STEPS LEADING TO THE PROBLEM:

    Take a photo using the back camera, automatic mode, auto white balance. The target contains bright sky and something on ground.

    EXPECTED OUTCOME:

    Natural colors

    ACTUAL OUTCOME:

    Some rather neutral targets appear bluish:
    http://www.flickr.com/photos/jarno_s...th/7586933462/

  13. #58
    Registered User
    Join Date
    Jun 2011
    Posts
    5

    Re: Image resize quality bad

    PRECONDITIONS

    PR1.2 or PR1.3 firmware

    STEPS LEADING TO THE PROBLEM:

    Add words to stock keyboard's dictionary and reboot

    EXPECTED OUTCOME:

    After adding new words to the keyboard's dictionary it should be still there and used for auto-correction after a device reboot.

    ACTUAL OUTCOME:

    After device reboot, all user-added words are gone from keyboard dictionary, so for have them used in auto-correction you have to add them again.

    FREQUENCY OF OCCURENCE:
    After every device reboot.

    WORKAROUND:
    Never restart phone.

  14. #59
    Registered User
    Join Date
    May 2012
    Posts
    24

    Favorite blogs not bookmarked

    PRECONDITIONS

    PR1.2 or PR1.3 firmware

    STEPS LEADING TO THE PROBLEM:

    Set some feed appear on home screen.
    Refresh home screen.
    Tap on a blog item.
    Tap on the star to bookmark the item.
    Swipe to close the preview.
    Start Feeds application
    Check the Favorites.

    EXPECTED OUTCOME:

    The bookmarked article is shown in Favorites.

    ACTUAL OUTCOME:

    The bookmarked is not shown in Favorites.

    FREQUENCY OF OCCURENCE:
    Frequently (if not always)

    WORKAROUND:
    Skip closing the preview. (You may tap the Feed application icon in the preview.)

  15. #60
    Registered User
    Join Date
    May 2012
    Posts
    24

    Maps do not find the addresses it suggests (depending on language)

    PRECONDITIONS

    PR1.2 or PR1.3 firmware?

    STEPS LEADING TO THE PROBLEM:

    Set language to English (United States) in settings.
    Start Maps application.
    Type "Kauppakatu" in search box.
    Maps suggests "Kauppakatu, 33210, Tampere, Finland" (maybe depending on your current location).
    Choose to search the suggested address.

    EXPECTED OUTCOME:

    Maps shows the place in the map.

    ACTUAL OUTCOME:

    Maps shows Taninkatu 3, 33400 Tampere, Finland

    FREQUENCY OF OCCURENCE:
    Always

    WORKAROUND:
    Replace Finland by Suomi in the search string, or change language to Suomi.

Similar Threads

  1. Where Harmattan Platform SDK 1.2?
    By CODeRUS in forum Feedback - Nokia Developer Services & Infrastructure
    Replies: 2
    Last Post: 2012-03-21, 01:16
  2. Harmattan PR 1.2 available for N9!
    By gnuton in forum Nokia N9
    Replies: 0
    Last Post: 2012-02-28, 14:02
  3. Replies: 5
    Last Post: 2011-10-14, 09:01
  4. Harmattan Platform API vs. Meego 1.2 Harmattan Platform API
    By cycnus in forum [Archived] Qt SDKs and Tools
    Replies: 3
    Last Post: 2011-08-11, 10:04
  5. Forum for N9 Harmattan SDK
    By kalinga_ray in forum [Archived] Qt SDKs and Tools
    Replies: 1
    Last Post: 2011-06-30, 14:40

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •