Discussion Board

Page 1 of 3 123 LastLast
Results 1 to 15 of 33
  1. #1
    Registered User
    Join Date
    Mar 2013
    Posts
    16

    sending MMS using AT commande

    I have send the SMS using AT and GSM Modem, can i use this for sending MMS also?. If it so, please tell me AT commands, ans how i can use this for the MMS please..
    Last edited by maia1991; 2013-03-13 at 22:05.

  2. #2
    Super Contributor
    Join Date
    Mar 2003
    Location
    Finland
    Posts
    9,570

    Re: sending MMS using AT commande

    It is quite possible that there are no AT commands at all for sending MMS, but ask the manufacturer of the GSM modem that you are using for a reference manual for the AT commands they support, in case it has/mentions sending/receiving MMS.

  3. #3
    Registered User
    Join Date
    Mar 2013
    Posts
    16

    Re: sending MMS using AT commande

    i can't ask a manufacturer ,there not another way.

  4. #4
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,789

    Re: sending MMS using AT commande

    As far as I know Nokia devices do not support sending MMS-s via AT commands.
    But in general there are devices supporting it, I searched for MMS AT commands with Google, and one of the first hits was http://www.mt-system.ru/sites/defaul...nual_v1.01.pdf. Some others seem implement that via AT*EAPP command (execute application or something), where the application is yet again completely manufacturer dependent.

  5. #5
    Registered User
    Join Date
    Mar 2013
    Posts
    16

    Re: sending MMS using AT commande

    Thanks,but i d'ont understand how do you mean (AT*EAPP).

  6. #6
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,789

    Re: sending MMS using AT commande

    A search for MMS AT commands EAPP shows what I mean.

  7. #7
    Registered User
    Join Date
    Mar 2013
    Posts
    16

    Re: sending MMS using AT commande

    please,i used the putty laguage is supported this commande?

  8. #8
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,789

    Re: sending MMS using AT commande

    PuTTY is an application, not a language. Otherwise yes, if the modem supports a commands, it is expected to work with PuTTY, or even with HyperTerminal.

  9. #9
    Registered User
    Join Date
    Mar 2013
    Posts
    16

    Re: sending MMS using AT commande

    hay,wizard I want to now how I can relize a platform of push MMS

  10. #10
    Registered User
    Join Date
    Mar 2013
    Posts
    16

    Re: sending MMS using AT commande

    in the doc http://www.mt-system.ru/sites/defaul...nual_v1.01.pdf.I can't understand the (title 4.2 configuration)
    and the parameters of the MMS PDU.

  11. #11
    Registered User
    Join Date
    Jan 2005
    Location
    Italy
    Posts
    639

    Re: sending MMS using AT commande

    Quote Originally Posted by maia1991 View Post
    in the doc http://www.mt-system.ru/sites/defaul...nual_v1.01.pdf.I can't understand the (title 4.2 configuration)
    and the parameters of the MMS PDU.
    Hello,
    the above link isn't working... i think it's been trunkated....

    regards,
    pg

  12. #12
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,789

    Re: sending MMS using AT commande

    Quote Originally Posted by pavarang View Post
    the above link isn't working... i think it's been trunkated....
    It is probably the one from #4.

  13. #13
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,789

    Re: sending MMS using AT commande

    Quote Originally Posted by maia1991 View Post
    in the doc http://www.mt-system.ru/sites/defaul...nual_v1.01.pdf.I can't understand the (title 4.2 configuration)
    and the parameters of the MMS PDU.
    As it says "About the details of these parameters, please refer to [2].". References are listed in section 1.2, bottom of page 4 actually.

  14. #14
    Registered User
    Join Date
    Mar 2013
    Posts
    1

    Re: sending MMS using AT commande

    Hi .. wizard please I have a problem, why on hyperterminal I can see the response in vb6 AT Comand but I can see the response never an AT command, I encountered an error reading comm device vb6 error no 8020 what's the solution?

  15. #15
    Nokia Developer Moderator
    Join Date
    Feb 2006
    Location
    Oslo, Norway
    Posts
    28,789

    Re: sending MMS using AT commande

    According to http://support.microsoft.com/default...b;en-us;318784, it is a VB6-specific problem with certain serial port drivers. I have absolutely no familiarity with Visual Basic. You may want to try updating the drivers as suggested.

Similar Threads

  1. Sending SMS with multiple recipients slower then sending separate SMS
    By Zeddeh in forum [Archived] Qt Mobility Project
    Replies: 1
    Last Post: 2010-05-12, 10:46
  2. Sending SMS from MIDlet causes error in sending normal sms's
    By hparkar in forum Mobile Java Networking & Messaging & Security
    Replies: 1
    Last Post: 2008-12-25, 11:02
  3. Sending SMS from MIDlet causes error in sending normal sms's
    By hparkar in forum Symbian Networking & Messaging (Closed)
    Replies: 1
    Last Post: 2008-12-24, 14:36
  4. Replies: 0
    Last Post: 2008-11-13, 13:15
  5. Sending/receiving sms and sending wap push message
    By noelfern501 in forum General Messaging
    Replies: 3
    Last Post: 2004-05-31, 09:20

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×