My problem with Symbian ^3 SDK has been solved and now my images are created and the App shows the app Icon and works fine.
But there is a problem with S60 3rd edition fp1.2 i.e s60 3rd FP1_2 and the the image of App icon i.e MyView_0x2004aa1e.mif is not getting created when the App is built or Run.
why is it so ?
Check the console for any errors, usually when something goes wrong, the console does have explanation on what is happening..
Then I have followed
step-1: copy your application .svg in this folder \epoc32\tools
(mifconv will be there)
step-2: From your command prompt to go this directory and call
"mifconv hello.mif hello.svg"
Done,hello.mif will be created.use it in your .pkg file for application Icon
I have copied my application's .svg in tools folder /path
typed C:\Symbian\9.2\S60_3rd_FP1_2\Epoc32\tools>mifconv MyView_0x2004aa1e.mif qgn_menu_MyView.svg
Then MyView_0x2004aa1e.mif got created in the tools path and in .pkg file I have replaced as
Now the App is Built without errors but still image /app ison is is not seen on the device.
Iam waiting after restarting the device
Edit: Looks like this tab was open for a long time and already some more discussions have taken place.
Like pointed out in post #50, this could be a side effect of the second installations andyou tweaking.
I would suggest you to replace epocroot with the actual path in the pkg file to point the second installations SDK path.
Alternatively you can see what EPOCROOT path is set in the carbide (and probably see if you have set the systems environment variable to point to older installation.)
You know your system much better than us, so please check these things more closely and see if its ok logically.
By going thru your last comment I have checked the System Variable path in the Environment Variable settings of my system and the path is showing as
C:\Program Files\Common Files\Symbian\Tools;C:\Program Files\PC Connectivity Solution\;E:\Perl\bin\;C:\site\bin;C:\bin;C:\Perl\bin\;C:\Perl\site\bin;C:\Perl\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\CSL Arm Toolchain\bin;C:\Program Files\CodeSourcery\Sourcery G++ Lite\bin;C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v1.0\epoc32\tools\sbs\bin;C:\Symbian\Nokia_Symbian_Belle_SDK_v1.0\epoc32\tools\sbs\bin;;C:\Nokia\devices\Nokia_Symbian_Belle_SDK_v1.0\epoc32\tools\sbs\bin;%sbs_home%\bin;
Again when I have changed the workspace all are getting created except the .rsc file and the app icon on the device is not showing too.
Last edited by GTO_India; 2013-08-23 at 14:27.
replace epocroot with the actual path in the pkg file to point the second installations SDK path.?
What is the actual path My actual path is C:\Symbian\9.2\S60_3rd_FP1_2\Epoc32\Data\z\resource\apps.
Actually in what cases does the .mif files are not created in the above path and why ?