×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Super Contributor
    Join Date
    Mar 2003
    Posts
    2,426

    Bytes missing when sending ucs2 messages in PDU mode

    Some ending bytes are missing while trying to send (or write) messages in PDU mode.

    at+cmgw=23
    > 0011000D91683106115500F0000800080031003200330034
    +CMGW: 1

    OK
    at+cmgr=1
    +CMGR: 2,23
    0891683108100005F011000D91683106115500F0000800080031003200330000

    OK

    We can see that the last byte 34 is missing, and was replaced by a "00" and sometime other values.

    The data suite version is Nokia Cellular Data Suite 1.2 and a Nokia 6150 is used for testing.

    Can anyone help me out?
    Regards
    Johannowic

  2. #2
    Super Contributor
    Join Date
    Mar 2003
    Posts
    2,426

    RE: Bytes missing when sending ucs2 messages in PDU mode

    Posted by Al Pritchard, al_pritchard@mac.com
    on March 10, 2002 at 17:40



    Johannowic,

    What value is displayed on the 6150? I do not have one to test with, but it may be a bug in the phone handling USC2 characters.

    Do you only experience this with the last character of a USC2 TP-UD field? Or is it only with the digit 4?

    The rest of the TPUD looks fine, but the expiration is a bit short at 5 minutes.

    -al-

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×