×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Jul 2003
    Posts
    4

    Problems w/D211 under Linux

    Hello!

    The Nokia D211-Card works fine under Windows, but I have to change completely to a linux-network-platform.

    The compilation under Suse 8.1/Kernel 2.4.19-4GB seems to work fine, but the Card does not start. Other WIFI-Cards working fine.

    Perhaps can you tell me something new. The configuration-files under /etc/pcmcia seems to be configured by the right way...

    Thanks a lot.

    Thomas Kraus


    Output of /var/log/messages after inserting the d211-card:

    Jul 14 08:57:18 L10 cardmgr[543]: socket 0: Nokia D211
    Jul 14 08:57:18 L10 cardmgr[543]: executing: 'insmod -v /lib/modules/2.4.19-4GB//pcmcia/nokia_cs.o'
    Jul 14 08:57:18 L10 cardmgr[543]: + Using /lib/modules/2.4.19-4GB//pcmcia/nokia_cs.o
    Jul 14 08:57:18 L10 cardmgr[543]: + Symbol version prefix ''
    Jul 14 08:57:18 L10 cardmgr[543]: + Warning: loading /lib/modules/2.4.19-4GB//pcmcia/nokia_cs.o will taint the kernel: non-GPL license - Proprietary
    Jul 14 08:57:18 L10 cardmgr[543]: + See http://www.tux.org/lkml/#export-tainted for information about tainted modules
    Jul 14 08:57:18 L10 kernel: D211: ----------------------------------------------------------------
    Jul 14 08:57:18 L10 kernel: D211: - Nokia D211 multimode radio card driver
    Jul 14 08:57:18 L10 kernel: D211: - Version 1.06 (Wed Apr 16 12:26:36 EEST 2003).
    Jul 14 08:57:18 L10 kernel: D211: ----------------------------------------------------------------
    Jul 14 08:57:18 L10 cardmgr[543]: + Module nokia_cs loaded, with warnings
    Jul 14 08:57:18 L10 kernel: D211: Card Inserted. Initializing...
    Jul 14 08:57:18 L10 kernel: D211: Config: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x010f
    Jul 14 08:57:19 L10 cardmgr[543]: executing: './nokia_cs start eth1'
    Jul 14 08:57:19 L10 cardmgr[543]: + action start
    Jul 14 08:57:19 L10 cardmgr[543]: + ./nokia_cs: line 49: initlog: command not found
    Jul 14 08:57:19 L10 cardmgr[543]: + Starting up WLAN
    Jul 14 08:57:20 L10 cardmgr[543]: + I know of these:
    Jul 14 08:57:20 L10 cardmgr[543]: + eth1,default,0,0,,253,0
    Jul 14 08:57:20 L10 cardmgr[543]: + Initializing profile rottenberg
    Jul 14 08:57:25 L10 cardmgr[543]: + msgrcv: Interrupted system call
    Jul 14 08:57:27 L10 /etc/hotplug/net.agent[1289]: No HW description found ... exiting
    Jul 14 08:57:30 L10 cardmgr[543]: + msgrcv: Interrupted system call
    Jul 14 08:58:00 L10 last message repeated 6 times
    Jul 14 08:58:10 L10 last message repeated 2 times
    Jul 14 08:58:10 L10 cardmgr[543]: + Timeout in IPC message sending
    Jul 14 08:58:10 L10 last message repeated 7 times
    Jul 14 08:58:10 L10 cardmgr[543]: + Enable Shared Key authentication (shared_key1)
    Jul 14 08:58:10 L10 cardmgr[543]: + Timeout in IPC message sending
    Jul 14 08:58:10 L10 cardmgr[543]: + Timeout in IPC message sending
    Jul 14 08:58:10 L10 cardmgr[543]: + Starting Network start eth1
    Jul 14 08:58:10 L10 ifup-wireless: command 'iwconfig eth1 mode Managed' returned
    Jul 14 08:58:10 L10 ifup-wireless: Error for wireless request "Set Mode" (8B06) : SET failed on device eth1 ; Operation not supported.
    Jul 14 08:58:10 L10 ifup-wireless: command 'iwconfig eth1 nick L10' returned
    Jul 14 08:58:11 L10 ifup-wireless: Error for wireless request "Set Nickname" (8B1C) : SET failed on device eth1 ; Operation not supported.
    Jul 14 08:58:11 L10 ifup-wireless: command 'iwconfig eth1 nwid default' returned
    Jul 14 08:58:11 L10 ifup-wireless: Error for wireless request "Set NWID" (8B02) : SET failed on device eth1 ; Operation not supported.
    Jul 14 08:58:11 L10 ifup-wireless: command 'iwconfig eth1 key XXXXXXXXXX(the right HW-Adress)' returned
    Jul 14 08:58:11 L10 ifup-wireless: Error for wireless request "Set Encode" (8B2A) : SET failed on device eth1 ; Operation not supported.
    Jul 14 08:58:11 L10 ifup-wireless: command 'iwconfig eth1 essid default' returned
    Jul 14 08:58:11 L10 ifup-wireless: Error for wireless request "Set ESSID" (8B1A) : SET failed on device eth1 ; Operation not supported.
    Jul 14 08:58:21 L10 kernel: eth1: no IPv6 routers present

  2. #2
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    452
    Hello,

    Try using the search engine. There are several discussions available how to install the drivers for different Linux versions.


    Best Regards,

    Nokia D211 Support

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×