×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Aug 2003
    Posts
    13

    Client Provisioning for MMS

    Hi there,

    I have tried Client Provisioning for GPRS and CSD via SMS successfully. Based on the document, I try to provide MMS setting by adding the following before the end of document:
    <characteristic type="APPLICATION"/>
    <param name="APPID" value="w4"/>
    <param name="NAME" value="MMS"/>
    <param naem="To-NAPID" value="INTERNET"/>
    <characteristic type="APPADDR"/>
    <param name="ADDR" value="http://mmsc.operator.com"/>
    <characteristic type="PORT"/>
    <param name="PORTNBR" value="8005"/>
    </characteristic>
    </characteristic>
    <characteristic type="RESOURCE"/>
    <param name="URI" value="http://mmsc.operator.com:8005"/>
    <param name="STARTPAGE" value="http:/mmsc.operator.com:8005"/>
    </characteristic>
    </characteristic>

    However, it fail to be stored into the handset. Could anyone point out the problem with this?
    or how should I set the parameter for
    GPRS access point = "mms",
    Homepage as "http://mmsc.operator.com:8005"

    Thank you very much

  2. #2
    Nokia Developer Expert
    Join Date
    Mar 2003
    Location
    Tampere / Finland
    Posts
    1,839
    Hi!

    You need to have a NapDef called "INTERNET" to be able to bind the MMS application some specific APN settings. You could/should send the APN settings at the same document describing the APN parameters for "INTERNET" APN.

    What device you have been testing?

    Teemu / Forum Nokia

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •