×

Discussion Board

Results 1 to 8 of 8

Thread: OMA and 6600

  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    7

    OMA and 6600

    Hi all,

    I have some issues that I can't get clear from reading documents on the subjects.

    I work on creating a plattform for reciving the settings for WAP,MMS on the phone with a sms. I have currently used the OTA specification 7.0 (now 7.1) and this works fine on most devices. I have some questions to the futher regarding this option.

    1. Where could I get a whitepaper on 6600(url?)?

    2. OMA OTA looks like taking over the function that the 7.0 system uses. Is this a replacing technology or will they be used parallell in the future?

    3. What is the correct tech to use. Should I use OMA to configure this phones or should I start use OMA Provisioning?

    regards

    Vidar Kalsund

  2. #2
    Nokia Developer Expert
    Join Date
    Mar 2003
    Location
    Tampere / Finland
    Posts
    1,839
    Hello!

    1) You can find a document for Nokia 6600 from following URL: http://www.forum.nokia.com/main/1,65...ml&fileID=4066 Similar document for Series 40 products can be found also from Forum Nokia site.

    2) OMA Client Provisioning will replace the OTA 7.0 in future. All coming Nokia products uses OMA CP.

    3) OMA CP

    Teemu / Forum Nokia

  3. #3
    Registered User
    Join Date
    Mar 2003
    Posts
    7
    What is wrong with this file then?

    I would like to have the Nokia 6600 recive the mms settings.
    I have not set the right values to my provider yet, as this is just a test to get it to work as a sms

    Do I need to have the application part in another place?

    <?xml version="1.0"?>
    <!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN" "http://www.wapforum.org/DTD/prov.dtd">

    <wap-provisioningdoc version="1.0">
    <characteristic type="PXLOGICAL">
    <parm name="PROXY-ID" value="PROXY1"/>
    <parm name="NAME" value="Proxy 1"/>
    <characteristic type="PORT">
    <parm name="PORTNBR" value="8080"/>
    </characteristic>
    <characteristic type="PXPHYSICAL">
    <parm name="PXADDR" value="131.111.3.4"/>
    <parm name="PXADDRTYPE" value="IPV4"/>
    <parm name="TO-NAPID" value="Browsing_GPRS"/>
    </characteristic>
    </characteristic>
    <characteristic type="PXLOGICAL">
    <parm name="PROXY-ID" value="PROXY2"/>
    <parm name="NAME" value="Proxy 2"/>
    <characteristic type="PORT">
    <parm name="PORTNBR" value="8080"/>
    </characteristic>
    <characteristic type="PXPHYSICAL">
    <parm name="PXADDR" value="13.22.45.55"/>
    <parm name="PXADDRTYPE" value="IPV4"/>
    <parm name="TO-NAPID" value="Browsing_CSD"/>
    </characteristic>
    </characteristic>
    <characteristic type="NAPDEF">
    <parm name="NAPID" value="Browsing_CSD"/>
    <parm name="BEARER" value="GSM-CSD"/>
    <parm name="NAME" value="Browsing CSD"/>
    <parm name="NAP-ADDRESS" value="+5555555555"/>
    <parm name="NAP-ADDRTYPE" value="E164"/>
    <parm name="CALLTYPE" value="ANALOG-MODEM"/>
    <parm name="LINKSPEED" value="9600"/>
    <characteristic type="NAPAUTHINFO">
    <parm name="AUTHTYPE" value="PAP"/>
    <parm name="AUTHNAME" value="name2"/>
    <parm name="AUTHSECRET" value="password2"/>
    </characteristic>
    </characteristic>
    <characteristic type="NAPDEF">
    <parm name="NAPID" value="Browsing_GPRS"/>
    <parm name="BEARER" value="GSM-GPRS"/>
    <parm name="NAME" value="Browsing GPRS"/>
    <parm name="NAP-ADDRESS" value="internet"/>
    <parm name="NAP-ADDRTYPE" value="APN"/>
    <characteristic type="NAPAUTHINFO">
    <parm name="AUTHTYPE" value="PAP"/>
    <parm name="AUTHNAME" value="name"/>
    <parm name="AUTHSECRET" value="password"/>
    </characteristic>
    </characteristic>
    <characteristic type="APPLICATION">
    <parm name="APPID" value="w4"/>
    <parm name="TO-PROXY" value="PROXY1" />
    <parm name="ADDR" value="http://wap.mms.com" />
    </characteristic>
    </wap-provisioningdoc>

  4. #4
    Nokia Developer Expert
    Join Date
    Mar 2003
    Location
    Tampere / Finland
    Posts
    1,839
    Hi!

    Few things: MMS can only be used over GPRS connection and You need to assign an application to access point. I did some modifications to your XML and tested it with success using Nokia 6600.

    <?xml version="1.0"?>
    <!DOCTYPE wap-provisioningdoc PUBLIC "-//WAPFORUM//DTD PROV 1.0//EN" "http://www.wapforum.org/DTD/prov.dtd">

    <wap-provisioningdoc version="1.0">

    <characteristic type="PXLOGICAL">
    <parm name="PROXY-ID" value="PROXY1"/>
    <parm name="NAME" value="Proxy 1"/>
    <characteristic type="PORT">
    <parm name="PORTNBR" value="8080"/>
    </characteristic>
    <characteristic type="PXPHYSICAL">
    <parm name="PXADDR" value="131.111.3.4"/>
    <parm name="PXADDRTYPE" value="IPV4"/>
    <parm name="TO-NAPID" value="Browsing_GPRS"/>
    </characteristic>
    </characteristic>

    <characteristic type="PXLOGICAL">
    <parm name="PROXY-ID" value="PROXY2"/>
    <parm name="NAME" value="Proxy 2"/>
    <characteristic type="PORT">
    <parm name="PORTNBR" value="8080"/>
    </characteristic>
    <characteristic type="PXPHYSICAL">
    <parm name="PXADDR" value="13.22.45.55"/>
    <parm name="PXADDRTYPE" value="IPV4"/>
    <parm name="TO-NAPID" value="Browsing_CSD"/>
    </characteristic>
    </characteristic>

    <characteristic type="NAPDEF">
    <parm name="NAPID" value="Browsing_CSD"/>
    <parm name="BEARER" value="GSM-CSD"/>
    <parm name="NAME" value="Browsing CSD"/>
    <parm name="NAP-ADDRESS" value="+5555555555"/>
    <parm name="NAP-ADDRTYPE" value="E164"/>
    <parm name="CALLTYPE" value="ANALOG-MODEM"/>
    <parm name="LINKSPEED" value="9600"/>
    <characteristic type="NAPAUTHINFO">
    <parm name="AUTHTYPE" value="PAP"/>
    <parm name="AUTHNAME" value="name2"/>
    <parm name="AUTHSECRET" value="password2"/>
    </characteristic>
    </characteristic>

    <characteristic type="NAPDEF">
    <parm name="NAPID" value="Browsing_GPRS"/>
    <parm name="BEARER" value="GSM-GPRS"/>
    <parm name="NAME" value="Browsing GPRS"/>
    <parm name="NAP-ADDRESS" value="internet"/>
    <parm name="NAP-ADDRTYPE" value="APN"/>
    <characteristic type="NAPAUTHINFO">
    <parm name="AUTHTYPE" value="PAP"/>
    <parm name="AUTHNAME" value="name"/>
    <parm name="AUTHSECRET" value="password"/>
    </characteristic>
    </characteristic>

    <characteristic type="APPLICATION">
    <parm name="APPID" value="w4"/>
    <parm name="TO-PROXY" value="PROXY1" />
    <parm name="ADDR" value="http://mms.operator.com" />
    </characteristic>

    <characteristic type="APPLICATION">
    <parm name="APPID" value="w2"/>
    <parm name="TO-PROXY" value="PROXY2"/>
    <parm name="NAME" value="Browsing"/>
    <characteristic type="RESOURCE">
    <parm name="URI" value="http://wap.operator.com"/>
    <parm name="STARTPAGE"/>
    </characteristic>
    </characteristic>

    </wap-provisioningdoc>

    Teemu / Forum Nokia

  5. #5
    Registered User
    Join Date
    Mar 2003
    Posts
    7
    Thanx a lot.

    It worked great..

  6. #6
    Registered User
    Join Date
    Mar 2003
    Posts
    17

    How to encode the Application charecterstic in OTAP

    Hi All

    After recieving the ota settings, if i am trying to update the settings.Nokia 6600 is displaying like "unable to save the settings, i setting saved"

    Except MMSURL ( ADDR of the APPLICATION charterstic) it is saving all other parameters.
    The WBXML data:
    01062F1F2DB69181923239363437613535393566333762373633316138616238303731653565666264613230643365373100
    030B6A00
    C54601
    C65601 //bootstrap
    870706036D6F62696C656D6D7363000101
    C65101 //pxlogical
    871506036D6F62696C656D6D7363000187070603444E410001
    C65301 //port
    8723060338303830000101
    C65201 //pxphysical
    872006033139322E3136382E312E333000018721068501872206034E41503100010101
    C600015501 //application
    873606037734000187340603687474
    703A2F2F6D6F62696C656D6D73632F6D6D732F0001873906036D6F62696C656D6D73630001870706034D4D534300010101

    1. The way i am encoding the APPLICATION is it correct?
    In the oma document for ADDR, To-PROXY, APPID code page 1 is specified. But in nokia 60 series example it is different

    2. Is it complesary to use String table, in my msg i am setting to zero

    Please help me in this regard

  7. #7
    Nokia Developer Expert
    Join Date
    Mar 2003
    Location
    Tampere / Finland
    Posts
    1,839
    Hi!

    I'm sorry, but I dont have tools to convert your WBXML to XML. The previous example can be founs as WBXML format as an attachment in this post.

    Teemu / Forum Nokia
    Attached Files Attached Files

  8. #8
    Registered User
    Join Date
    Sep 2004
    Posts
    2
    talluritrk i am not sure if your wbxml code is valid.

    If you have a look at the beginning of the document:

    01062F1F2DB69181....

    0x01: specifies WBXML version 1.1. Version numbers 0x02 or 0x03 are more common these days.

    0x06: sets the DTD to -//WAPFORUM//DTD SL 1.0//EN Service Loading 1.0
    This should be 0x0B for Provisioning 1.0. http://www.openmobilealliance.org/te...lic-docid.html

    Regards, Gerald Smith

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×