×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    14

    RFCOMM Channel Request

    Hi,

    in the BTpoint2point example, the following procedure is used to
    get the offered services on the remote device before establishing a "serial profil" connection (if available) :

    iServiceSearcher->FindServiceL(iStatus)
    with
    iServiceClass(KServiceClass)
    and
    KServiceClass = 0x1101

    I try to repeat the procedure to obtain
    a RFCOMM Channel (before trying a connexion)

    with the RFCOMM UUID :
    KServiceClass = \x03

    Apparently I'm wrong, it doesn't work
    aError == KErrEof
    I guess, it is due to the fact that RFCOMM doesn't belong to the same class of Profils (or service), there's probably a specific SDPfunction to request the RFCOMM channel to the remote device
    but I'can't find It ..

    Does anyone can give me the correct procedure to get this precious channel number ?

    Thanks

    dphj

  2. #2
    Registered User
    Join Date
    Mar 2003
    Posts
    14
    no answer,
    I'm probably not clear enough,
    basically my question is :

    Can I get a RFCOMM channel, which is not associated with a Service record ?


    THANKS for your help.

    dphj

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×