×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    1

    How do I power down a cardphone 2 from within an application?

    We are using the NCP2 in a WinCE device but have found it to be particularly 'power hungry'. I would like to be able to issue the appropriate commands from with an application that would power down and power up the device as required. Dow anyone know how this is done?

  2. #2
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    379

    RE: How do I power down a cardphone 2 from within an application?

    Hi,

    It is possible to power down Nokia Card Phone 2.0 with proper application, for e.g. this is possible by disconnecting the power supply to the PCMCIA-slot. However if you power down the phone, when restarting the phone you propably need also to restart the Nokia Card Phone software as you need to configure the phone for usage again. Also when phone is powered down, you will not be able to receive phone calls or SMS and possible data connection is disconnected when Nokia Card Phone 2.0 is powered down.

    Best regards,

    Marko Tuukkanen
    Forum Nokia

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×