×

Discussion Board

Results 1 to 6 of 6
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    25

    Terminal Connection to phone

    Hello !
    I just try to develope an application that send and reveice SMS throught the COM Port that is connected to a nokia phone ! (ok nothing speacial I thought)

    I just connect to my nokia 6600 by hyperterm over Irda. When I enter AT i've got the answer OK. Unfortunatly no other AT command (like the needed AT+CNMI) workes. I always got back ERROR from the phone. It looks like only simple AT Commands (like ATD or ATI workes !).

    So what is my fault ? Can you please help !

    best regards

    Joerg Tuttas

  2. #2
    Registered User
    Join Date
    Dec 2003
    Location
    India
    Posts
    26

    Verbose mode

    Hi,
    Try to look for AT command which sets
    error display in Verbose mode
    There is also option to display error No :

    Check What that error means by looking up in the appropriate Nokia PCCSDK (2.1 0r 3) Manual
    ( You get it if you install it )

    Hope this helps...
    Regards,
    Ram.

  3. #3
    Nokia Developer Expert
    Join Date
    Mar 2003
    Location
    Tampere / Finland
    Posts
    1,839
    Hi!

    There is limited number of AT commands implemented in Symbian OS based phones. Commands like AT+CNMI is one of the ones that are not being implemented. This is due the fact that OS will receive all incoming messages and will store it to the internal database and forwarding to AT command interface is possible.

    Teemu / Forum Nokia

  4. #4
    Registered User
    Join Date
    Mar 2004
    Posts
    7
    Hello,

    How can a PPP connection be established with PHP or do i need to connect to my modem with a dialup script.

    Also am i wondering how i can send AT commands over PPP with PHP without using the hyperterminal.

    Greetings,

    Hamid

  5. #5
    Registered User
    Join Date
    Aug 2004
    Posts
    8

    how did u get your phone connected using irDA

    Hi,

    please help me with my problem.
    I have been trying to get my Nokia 6610/8250 conncted to the pc and get it response to AT commands.

    I tried to connect it to serial port . but I failed to get any response from the hyperterminal.

    if I use an irDA- does it nor connect it to a USB port? in that case
    from the hyperterminal which port should I select?


    I would be gratful if someone could mention the full process of
    connecting the phone to the pc and getting a response to AT cpmmands from the hyperterminal.

    cheers

    ranjan

  6. #6
    Registered User
    Join Date
    Aug 2004
    Posts
    4

    Try some other

    hi
    u may try AT+CPIN command. look for other commands.
    u may succeed.

    thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •