×

Discussion Board

Results 1 to 3 of 3

Thread: SIP Stack & NAT

  1. #1
    Regular Contributor
    Join Date
    Jun 2004
    Posts
    53

    SIP Stack & NAT

    Hi,

    I am trying to register to a SIP proxy that is behind NAT. When proxy modifies the contact header of the REGISTER message to
    register the address of the NAT rather than the UA's private IP-address behind the NAT, the SIP stack ignores the returned 200 OK message and doesn't inform my application at all.

    I tried the same thing with e.g. "SJPhone" and everything worked well...

    So, my question is that is it possible to configure the SIP stack so that it accepts these responses which have contact-header modified, or is there any other solution to my problem?

    Has anyone had similar problems?

    Thanks in advance,
    jrantam

  2. #2
    Super Contributor
    Join Date
    Apr 2003
    Location
    Czech Republic
    Posts
    915
    yeah, that is the problem with SIP protocol and common access to the internet through GPRS (usually behind some NAT). The only solution as far as I know is to make your provider to support this SIP thingy in the proxy... Of course there can be some way, like some kind of tunnel, but for that you would also need entry points on both sides of the proxy...:-(

    So, I don't think there is a way around it from the client point of view.

  3. #3
    Registered User
    Join Date
    May 2003
    Posts
    187

    SIP & NAt

    Hi,

    this is not correct I'm using sip over GPRS and it's working fine

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×