×

Discussion Board

Results 1 to 2 of 2
  1. #1
    Registered User
    Join Date
    Sep 2003
    Posts
    4

    6230 DKU-2 cable and linux

    Hello,

    I cannot transfer files from my Linux box to my 6230 via DKU-2 cable. I was able set up serial connection, but i didn't succeed mounting the memory card. (What was very staightforward with 3300.)

    Kernel log looks like this with 6230:

    Sep 16 09:25:25 localhost kernel: usb.c: USB disconnect on device 00:1d.1-2 address 6
    Sep 16 09:25:28 localhost kernel: hub.c: new USB device 00:1d.1-2, assigned address 7
    Sep 16 09:25:28 localhost kernel: ttyACM0: USB ACM device
    Sep 16 09:25:32 localhost kernel: usb-uhci.c: ENXIO 80000780, flags 0, urb d9fe4320, burb d9fe44a0
    Sep 16 09:25:32 localhost kernel: usb-uhci.c: ENXIO 80000780, flags 0, urb d9fe44a0, burb d9fe4220

    Kernel log looks like this with 3300:

    Sep 16 09:28:27 localhost kernel: hub.c: new USB device 00:1d.1-2, assigned address 8
    Sep 16 09:28:27 localhost kernel: usb.c: USB device 8 (vend/prod 0x421/0x408) is not claimed by any active driver.
    Sep 16 09:28:30 localhost kernel: Initializing USB Mass Storage driver...
    Sep 16 09:28:30 localhost kernel: usb.c: registered new driver usb-storage
    Sep 16 09:28:30 localhost kernel: usb-uhci.c: interrupt, status 2, frame# 1225
    Sep 16 09:28:31 localhost kernel: usb_control/bulk_msg: timeout
    Sep 16 09:28:31 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices
    Sep 16 09:28:31 localhost kernel: Vendor: NOKIA Model: 3300a Rev: 0001
    Sep 16 09:28:31 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02
    Sep 16 09:28:31 localhost kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
    Sep 16 09:28:31 localhost kernel: SCSI device sda: 62656 512-byte hdwr sectors (32 MB)
    Sep 16 09:28:31 localhost kernel: /dev/scsi/host0/bus0/target0/lun0: p1
    Sep 16 09:28:31 localhost kernel: USB Mass Storage support registered.
    Sep 16 09:28:31 localhost scsi.agent[29318]: disk at devices/scsi0/0:0:0:0
    Sep 16 09:28:32 localhost perl: drakupdate_fstab called with --auto --add /dev/scsi/host0/bus0/target0/lun0/part1


    I use Mandrake 10.0

    Any ideas?

  2. #2
    Registered User
    Join Date
    Jun 2003
    Posts
    15

    What was very staightforward with 3300.

    3300 is actually two devices in one. if you try to open your phone you will see that it is actually two pieces.

    * one is for phone
    * the other is for mass storage

    in other words 3300 acts like a conpact flash device.

    6230 needs a third party software like OPM2, Audio manager or PC Suite to function.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •