×

Discussion Board

Results 1 to 3 of 3
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    1

    Card Phone 2 freezes on win 98

    I'm trying to install Card Phone 2 on my laptop with finnish Win 98 SE. The setup runs smooth, but when I restart the computer and plug the card in, the software says it's reading and then the computer freezes. I've tried to change the com port, but it doesn't help. Any ideas?

  2. #2
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    379

    RE: Card Phone 2 freezes on win 98

    Hi,

    Check that no other program is using the PCMCIA-slot where the Nokia Card Phone 2.0 is inserted. Also check that no other hardware is aasigned to that port and that there is a free IRQ for the Nokia Card Phone 2.0.

    Best regards,

    Marko Tuukkanen
    Forum Nokia

  3. #3
    Registered User
    Join Date
    Mar 2003
    Posts
    3

    RE: Card Phone 2 freezes on win 98

    I used to get a similar problem under NT4.0 when installing Gold Card modems on IBM Thinkpads - it was a resource conflict issue with the TP's internal modem. I suggest you check carefully that nothing else is trying to grab the IRQ or I/O port your CardPhone is trying to use.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×