×

Discussion Board

Results 1 to 12 of 12
  1. #1
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    64

    Ethernet Plugin: The horror never stops! :-(

    Hi there!

    I've been struggling with the ethernet plugin for the 2.0 SDK for two days now but couldn't get the network connection to work so far. I have followed all the steps from the docs and previous posts to the forum.

    Strangely enough, when I open a socket connection I can see in the npacketadmin that packets actually leave the emulator (e.g. the DHCP server gets query packets) but _NO_ packets are received.

    I've tried both DHCP and static IP, both PROMPT and DONOTPROMPT, both IPv4 and IPv6 but all to the same result: I get a virtual MAC for the emulator, packets leave the emulator (and can be seen on the net via ethereal) but _NO_ packets get back into the emulator.

    Anyone an idea on this?

    Cheers,
    Stevie

    PS.: Is there a forum dedicated to npacket admin problems?

  2. #2
    Regular Contributor
    Join Date
    Nov 2004
    Posts
    153
    Hey Stevie,

    Try out the ethernet plug-in for Series60 2.1 version and it worked for me.

    Reply back if u couldn't able to make it work.

    Cheers,
    Sunil

  3. #3
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    64
    Hi Sunil!

    Hmmm... I re-scanned the site for a 2.1 Ethernet plugin but could only find the 2.0 plugin. Where do I get the 2.1 one?

    Cheers,
    Stevie.

  4. #4
    Regular Contributor
    Join Date
    Nov 2004
    Posts
    153
    Hey,i was talking about the Series60 SDK 2.1,

    You install that SDK and leave about searching the ethernet plug-in for SDK 2.1 as u don't require ethernet plug-in once you install SDK.


    Cheers,
    Sunil

  5. #5
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    64

    Still not successful!

    Hi Sunil,

    I've now tried it with 2.1/CW with same (unsatisfactory) results: As I can see in npacketadmin, packets leave the emulator (sent packet count rises) but no packets come back in (received packet count stays zero). Any idea??

    Cheers,
    Stefan

  6. #6
    Regular Contributor
    Join Date
    Nov 2004
    Posts
    153
    Hi Stevie,

    I think the problem may be with the network settings of your emulator,could you let me know what are your settings i.e,IP address,DNS server address,Gateway address etc.

    Cheers,
    Sunil

  7. #7
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    64
    Sure, here we go with cedout.cfg directly dumped from my S60_2.1_CW emulator, slightly edited to fit the 10k limit:


    ##
    ## AUTO-GENERATED CONFIGURATION FILE
    ## CommDB Database Dump Utility
    ## 1.1
    ##

    ##
    ## Network
    ##
    [Network]
    ADD_SECTION
    # COMMDB_ID = 1
    Name=Intranet
    FIELD_COUNT=1
    END_ADD


    ##
    ## ModemBearer
    ##
    [ModemBearer]
    ## ...

    ##
    ## LANBearer
    ##
    [LANBearer]
    ADD_SECTION
    # COMMDB_ID = 1
    Name=LAN_bearer_1
    Agent=NullAgt
    IfName=ethint
    LDDName=ethercard
    PDDName=etherwins
    LastSocketActivityTimeout=600
    LastSessionClosedTimeout=600
    LastSocketClosedTimeout=600
    FIELD_COUNT=8
    END_ADD


    ##
    ## Location
    ## ...

    ##
    ## Chargecard
    ## ...

    ##
    ## GlobalSettings
    ##
    [GlobalSettings]
    ADD_SECTION
    WAPAccessPoint=2
    RedialAttempts=3
    SmsBearer=3
    SmsReceiveMode=2
    GPRSAttachMode=1
    AcceptIncomingGprs=1
    GPRSClassCBearer=GSM
    ConnectionAttempts=2
    ModemForDataAndFax=2
    ModemForPhoneServicesAndSMS=2
    LocationForDataAndFax=2
    LocationForPhoneServicesAndSMS=2
    DefaultNetwork=1
    BearerAvailabilityCheckTSY=MM
    FIELD_COUNT=14
    END_ADD


    ##
    ## DialOutISP
    ##
    [DialOutISP]
    ADD_TEMPLATE
    Name=Default Dial Out ISP
    DialResolution=TRUE
    UseLoginScript=FALSE
    PromptForLogin=TRUE
    DisplayPCT=FALSE
    IfPromptForAuth=TRUE
    IfCallbackEnabled=FALSE
    CallbackTimeout=0
    IpAddrFromServer=TRUE
    IpDNSAddrFromServer=TRUE
    EnableIPHeaderComp=FALSE
    EnableLCPExtension=FALSE
    DisablePlainTextAuth=FALSE
    EnableSWComp=FALSE
    BearerService=0
    BearerProtocol=UNSPECIFIED
    RlpVersion=0
    IwfToMs=0
    MsToIwf=0
    AckTimer=0
    RetransmissionAttempts=0
    ResequencePeriod=0
    V42Compression=0
    V42Codewords=0
    V42MaxLength=0
    Asymmetry=0
    UserInitUpgrade=FALSE
    UseEdge=FALSE
    FIELD_COUNT=28
    END_TEMPLATE

    ADD_SECTION
    # COMMDB_ID = 2
    Name=NT RAS
    Description=Test
    Type=INTERNETONLY
    DialResolution=TRUE
    UseLoginScript=TRUE
    LoginScript=CHARMAP \[windows-1252\]\nLOOP 10\n{\nSEND "CLIENT"+<0x0d>\nWAIT 3\n{\n"SERVER" OK\n}\n}\nEXIT KErrNoAnswer$\n\nOK:\nEXIT\n
    PromptForLogin=FALSE
    DisplayPCT=FALSE
    IfNetworks=ip
    IfPromptForAuth=FALSE
    IfAuthName=RasUser
    IfAuthPass=pass
    AuthRetries=0
    IfCallbackEnabled=FALSE
    CallbackTimeout=0
    IpAddrFromServer=TRUE
    IpAddr=0.0.0.0
    IpNetMask=255.255.255.0
    IpGateway=0.0.0.0
    IpDNSAddrFromServer=TRUE
    IpNameServer1=0.0.0.0
    IpNameServer2=0.0.0.0
    EnableIPHeaderComp=FALSE
    EnableLCPExtension=FALSE
    DisablePlainTextAuth=FALSE
    EnableSWComp=FALSE
    BearerName=SERVICEEXTENDED
    BearerSpeed=UNSPECIFIED
    BearerCE=UNSPECIFIED
    BearerType=CSD
    ChannelCoding=UNSPECIFIED
    AIUR=UNSPECIFIED
    RequestedTimeSlots=0
    MaximumTimeSlots=0
    BearerService=0
    BearerProtocol=UNSPECIFIED
    RlpVersion=0
    IwfToMs=0
    MsToIwf=0
    AckTimer=0
    RetransmissionAttempts=0
    ResequencePeriod=0
    V42Compression=0
    V42Codewords=0
    V42MaxLength=0
    Asymmetry=0
    UserInitUpgrade=FALSE
    UseEdge=FALSE
    FIELD_COUNT=48
    END_ADD


    ##
    ## DialInISP
    ##
    [DialInISP]
    ADD_TEMPLATE
    Name=Default Dial In ISP
    UseLoginScript=FALSE
    IpAddrFromServer=TRUE
    IpDNSAddrFromServer=TRUE
    EnableIPHeaderComp=FALSE
    EnableLCPExtension=FALSE
    DisablePlainTextAuth=FALSE
    EnableSWComp=FALSE
    UseEdge=FALSE
    FIELD_COUNT=9
    END_TEMPLATE

    ADD_SECTION
    # COMMDB_ID = 2
    Name=Dial In ISP01
    UseLoginScript=FALSE
    IpAddrFromServer=TRUE
    IpDNSAddrFromServer=TRUE
    EnableIPHeaderComp=FALSE
    EnableLCPExtension=FALSE
    DisablePlainTextAuth=FALSE
    EnableSWComp=FALSE
    UseEdge=FALSE
    FIELD_COUNT=9
    END_ADD


    ##
    ## OutgoingGPRS
    ##
    [OutgoingGPRS]
    ADD_SECTION
    # COMMDB_ID = 1
    Name=GPRS01
    APN=gprs01APNPlaceHolder
    PDPType=IPV4
    ReqPrecedence=0
    ReqDelay=0
    ReqReliability=0
    ReqPeakThroughput=0
    ReqMeanThroughput=0
    MinPrecedence=0
    MinDelay=0
    MinReliability=0
    MinPeakThroughput=0
    MinMeanThroughput=0
    DataCompression=FALSE
    HeaderCompression=FALSE
    GprsUseEdge=FALSE
    AnonymousAccess=FALSE
    IfNetworks=ip
    IfPromptForAuth=FALSE
    AuthRetries=1
    IpDNSAddrFromServer=FALSE
    EnableLCPExtension=FALSE
    DisablePlainTextAuth=FALSE
    IpAddrFromServer=TRUE
    GprsAccessPointType=0
    QosWarningTimeout=0
    FIELD_COUNT=26
    END_ADD


    ##
    ## IncomingGPRS
    ##
    [IncomingGPRS]
    ADD_SECTION
    # COMMDB_ID = 1
    Name=Incoming GPRS Settings PlaceHolder
    APN=Test
    PDPType=IPV4
    ReqPrecedence=1
    ReqDelay=1
    ReqReliability=1
    ReqPeakThroughput=1
    ReqMeanThroughput=1
    MinPrecedence=1
    MinDelay=1
    MinReliability=1
    MinPeakThroughput=1
    MinMeanThroughput=1
    DataCompression=FALSE
    HeaderCompression=FALSE
    GprsUseEdge=FALSE
    AnonymousAccess=FALSE
    IfNetworks=ip
    IfPromptForAuth=FALSE
    IfAuthName=RasUser
    IfAuthPass=pass
    AuthRetries=1
    IpDNSAddrFromServer=TRUE
    IpNameServer1=0.0.0.0
    IpNameServer2=0.0.0.0
    EnableLCPExtension=FALSE
    DisablePlainTextAuth=FALSE
    PDPAddress=0.0.0.0
    IpAddrFromServer=TRUE
    FIELD_COUNT=29
    END_ADD


    ##
    ## DefaultGPRS
    ##
    [DefaultGPRS]
    ADD_SECTION
    # COMMDB_ID = 1
    Name=Dummy Default GPRS Settings
    Usage=1
    APN=Access point name
    PDPType=IPV6
    PDPAddress=www.wid.com
    Precedence=1
    Delay=1
    Reliability=1
    PeakThroughput=1
    MeanThroughput=1
    MinPrecedence=1
    MinDelay=1
    MinReliability=1
    MinPeakThroughput=1
    MinMeanThroughput=1
    DataCompression=TRUE
    HeaderCompression=TRUE
    GprsUseEdge=FALSE
    AnonymousAccess=TRUE
    FIELD_COUNT=19
    END_ADD


    ##
    ## CDMA2000PacketServiceTable
    ##
    [CDMA2000PacketServiceTable]
    ## ...


    ##
    ## DefaultCDMA2000SettingsTable
    ##
    [DefaultCDMA2000SettingsTable]

    ##
    ## LANService
    ##
    [LANService]
    ADD_SECTION
    # COMMDB_ID = 1
    Name=LAN_service_1
    IfNetworks=ip,ip6
    IpNetMask=255.255.254.0
    IpGateway=172.27.24.10
    IpAddrFromServer=FALSE
    IpAddr=172.27.25.102
    IpDNSAddrFromServer=FALSE
    IpNameServer1=172.27.24.5
    IpNameServer2=0.0.0.0
    FIELD_COUNT=9
    END_ADD


    ##
    ## IAP
    ##
    [IAP]
    ADD_SECTION
    # COMMDB_ID = 1
    Name=LAN_IAP_1
    IAPService=1
    IAPServiceType=LANService
    IAPBearer=1
    IAPBearerType=LANBearer
    IAPNetwork=1
    IAPNetworkWeighting=0
    Location=3
    FIELD_COUNT=8
    END_ADD

    ADD_SECTION
    # COMMDB_ID = 2
    Name=NTRas GPRS
    IAPService=1
    IAPServiceType=OutgoingGPRS
    IAPBearer=2
    IAPBearerType=ModemBearer
    IAPNetwork=1
    IAPNetworkWeighting=0
    Location=4
    FIELD_COUNT=8
    END_ADD


    ##
    ## ConnectionPreferences
    ##
    [ConnectionPreferences]
    ADD_SECTION
    Ranking=1
    Direction=OUTGOING
    DialogPref=DONOTPROMPT
    BearerSet=LAN
    IAP=1
    FIELD_COUNT=5
    END_ADD


    ##
    ## BTDeviceTable
    ##
    [BTDeviceTable]

    ##
    ## BTSecurityTable
    ##
    [BTSecurityTable]

    ##
    ## BTDefaultTable
    ##
    [BTDefaultTable]

    ##
    ## Proxies
    ##
    [Proxies]
    ADD_SECTION
    # COMMDB_ID = 1
    ISP=2
    ProxyServiceType=DialOutISP
    UseProxyServer=FALSE
    ProxyServerName=www.dummyproxy.com
    ProtocolName=http
    PortNumber=80
    Exceptions=www.dummyproxy.com/exception
    FIELD_COUNT=7
    END_ADD


    ##
    ## AgentLookup
    ##
    [AgentLookup]

    ##
    ## WAPAccessPoint
    ##
    [WAPAccessPoint]
    ADD_TEMPLATE
    Name=Default Dial In ISP
    CurrentBearer=WAPIPBearer
    FIELD_COUNT=2
    END_TEMPLATE

    ADD_SECTION
    # COMMDB_ID = 2
    Name=ETHERNET
    CurrentBearer=WAPIPBearer
    StartPage=none
    FIELD_COUNT=3
    END_ADD


    ##
    ## WAPIPBearer
    ##
    [WAPIPBearer]
    ADD_TEMPLATE
    AccessPointId=0
    IAP=0
    WSPOption=CONNECTIONLESS
    Security=FALSE
    ProxyPortNumber=0
    FIELD_COUNT=5
    END_TEMPLATE

    ADD_SECTION
    # COMMDB_ID = 2
    AccessPointId=2
    GatewayAddress=www.wapgateway.com
    IAP=1
    WSPOption=CONNECTIONORIENTED
    Security=FALSE
    ProxyPortNumber=1
    FIELD_COUNT=6
    END_ADD


    ##
    ## WAPSMSBearer
    ##
    [WAPSMSBearer]
    ADD_TEMPLATE
    AccessPointId=0
    WSPOption=CONNECTIONLESS
    Security=FALSE
    FIELD_COUNT=3
    END_TEMPLATE

    ADD_SECTION
    # COMMDB_ID = 2
    AccessPointId=2
    GatewayAddress=+4412345678901
    ServiceCentreAddress=+442071234567
    WSPOption=CONNECTIONORIENTED
    Security=FALSE
    FIELD_COUNT=5
    END_ADD


    ##
    ## SecureSocketTable
    ##
    [SecureSocketTable]
    ADD_SECTION
    # COMMDB_ID = 1
    ProtocolName=ssl3.0
    ProtoLibrary=ssladaptor.dll
    FIELD_COUNT=2
    END_ADD

    ADD_SECTION
    # COMMDB_ID = 2
    ProtocolName=tls1.0
    ProtoLibrary=ssladaptor.dll
    FIELD_COUNT=2
    END_ADD


    ##
    ## BTPersistTable
    ##
    [BTPersistTable]
    ##
    ## ERROR
    ## AccessTypeTable
    ##
    ##
    ## ERROR
    ## Error opening table
    ##
    ##
    ## ERROR
    ## Unable to find the specified object or missing required field values
    ##

    ##
    ## VirtualBearer
    ##
    [VirtualBearer]

    ##
    ## VpnService
    ##
    [VpnService]

  8. #8
    Regular Contributor
    Join Date
    Mar 2003
    Posts
    64

    W2k seems to do - anyone has the emu working under XP???

    Okay, I've successfully tried the 2.0 SDK / Ethernet Plug-In combo on a vanilla Windows 2000 system. Worked like a charm .

    Question now: is this an XP specific problem? Does anyone have the emulator networking under XP??

    Cheers, Stevie.

  9. #9
    Registered User
    Join Date
    Feb 2004
    Posts
    124
    no.

  10. #10
    Regular Contributor
    Join Date
    Nov 2004
    Posts
    153
    Yeah,it is working fine for me on XP,

    Cheers,
    Sunil

  11. #11
    Registered User
    Join Date
    Mar 2005
    Posts
    3
    well I've been trying to get this shit work with my xp.. no luck.. is this problem solved or what? how it can be that it works on someone but not the other?

  12. #12
    Registered User
    Join Date
    Mar 2005
    Posts
    3
    I got my networking to work and made a simple howto about it
    http://koti.utanet.fi/~figu/networkhowto/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×