×

Discussion Board

Results 1 to 4 of 4
  1. #1
    Registered User
    Join Date
    Sep 2004
    Posts
    40

    MetroTrk Debugging

    I'm trying to debug usin metrotrk, I follows
    steps indicated in the "Codewarrior Help System" about "Debugging via USB Connection", but it fails:


    MetroTrkProtocolPlugin: Can`t connect to MetroTRK (Either target reset may be required or mismatch between selected and connected com port or com port not connected.)

    The connection is ok, I don't know where is the error. can anybody help me?

    Thanks in advance.

    Acar

  2. #2
    Nokia Developer Expert
    Join Date
    Mar 2004
    Posts
    98
    I just wanted to get a little detail from you. Which device are you targeting? Also, are you using a serial connection type?

  3. #3
    Registered User
    Join Date
    Sep 2004
    Posts
    40
    I tried with 7610 and DKU datacable ...



    Acar

  4. #4
    Nokia Developer Expert
    Join Date
    Mar 2004
    Posts
    98
    Unfortunately, you can't do on device debugging currently with the Nokia phones due to the Series 60 security model. So this is why you are getting errors when trying this.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •