×

Discussion Board

Results 1 to 2 of 2

Thread: SIP settings

  1. #1
    Registered User
    Join Date
    May 2005
    Posts
    38

    SIP settings

    Hi,

    I tried running "ChipFlip" example that comes bundled with Symbian.

    As mentioned in one of my other posts, rgistration occurs successfully but server shows that Accept Pattern is "blank".

    I am wondering whether this could be due to SIP settings on my emulator. I am using SIP3.0.

    SIP settings --

    1. Provider

    2. Service Profile : IETF

    3. Default Access Point : LAN_IAP_1

    4. Public user name : tom_symbian@realm

    5. Use Compression : No

    6. Registration : When needed

    7. Use security : Yes

    8. Proxy Server
    a) Proxy Serv address : 192.168.0.XX
    b) Realm : realm
    c) User name : tom_symbian
    d) Password : xxxxx
    e) Allow loose routing : Yes
    f) Transport type : UDP
    g) Port : 5060

    9. Registrar Server
    a) Registrar Serv address : 192.168.0.XX
    b) Realm : realm
    c) User name : tom_symbian
    d) Password : xxxxx
    e) Transport type : UDP
    f) Port : 5060


    Is there anything wrong with this configuration ?

    Tom

  2. #2
    Registered User
    Join Date
    May 2005
    Posts
    38
    I am now getting SIP error code 415 i.e. Unsupported Media Type

    What am I doing wrong ?

    Tom

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •