×

Discussion Board

Results 1 to 3 of 3
  1. #1
    Registered User
    Join Date
    Mar 2005
    Location
    switzerland
    Posts
    11

    modified: (Bluetooth) PMP not possible?

    point-to-point communications works properly ...

    but when i configure a point-to-multipoint network with bluetooth/sockets my n6600 shows the following exception when i create the 2nd socket object:
    "Unable to connect. Max. Number of Bluetooth Connections already in use."

    did i miss something or is it truly impossible to use more than one bluetooth connection in python4series60? or is it a socket problem?

    any ideas?

    thanks - phile

    ------------------------------
    i've made more tests around the problem above this morning:

    N6600 as Master:
    - the error message is shwon, if socket.bt_discover() is called the second time
    - but when i connect directly to (address,port), both connections work properly (... yeah ...)

    N6600 as Slave:
    the second Master can discover my device but not my service. I've tried following configurations:
    - 1socket and 1service
    - 1socket and 2services
    - 2 sockets and same service
    - 2 sockets and different services

    did anybody notice similar problems?

    thanks - phile
    Last edited by pfriki; 2005-08-05 at 14:14.

  2. #2
    Registered User
    Join Date
    Mar 2005
    Location
    Switzerland
    Posts
    3
    same problem on my 6630 ...

  3. #3
    Registered User
    Join Date
    Mar 2005
    Location
    switzerland
    Posts
    11
    is nobody using Point-to-Multipoint exempt from freyc1? What are your experiences with PMP freyc1?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×