×

Discussion Board

Results 1 to 4 of 4
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    3

    Problems with the d211 nokia_ctl under linux.

    Hi,

    I've been playing around with the source that comes with the d211 drivers for linux. The problem is that I'm unable to compile a working version of the ui. The original, ready-compiled binary (nokia_ctl) works just fine, but although I can compile it from source, it doesn't appear to work. All commands return an unknown ipc error.

    The readme said that nokia has tested the ui with kernel 2.4.0 and I'm using 2.4.19 and SystemV type ipc. Might this be the problem?
    I'm using GCC 2.95.3

    -- Mikko Airaksinen

  2. #2
    Registered User
    Join Date
    Mar 2003
    Posts
    1

    RE: Problems with the d211 nokia_ctl under linux.

    I have also problems compliling a working version if nokia_ctl. enable_gsm and gsm enableGSMradio works fine but when try to send an SMS i get the following output with debug enabled:

    cmd: 33
    sending message to msg queue 0, key 0x407f98ea
    send request:
    TID: 305a9f65
    Message ID: 290000
    Timeout: 5000
    Len: 115

    waiting responce message from msg queue 65538, key 0x417f98ea
    received responce:
    TID: 305a9f65
    Message ID: 1290000
    Timeout: 180000
    Len: 21
    Status: ERROR 1
    An error occurred
    DataLen -21

    send_message failed


    There is no problems to send an SMS when I use the compiled version that comes with the d211 drivers.

    --Pr-Johan Lif

  3. #3
    Registered User
    Join Date
    Mar 2003
    Posts
    2

    RE: Problems with the d211 nokia_ctl under linux.

    Hi,

    Im trying to get connected with D211 / Linux, too. Presently I ve succeeded to get nokia_ctl OK, and I m able to send e.g. SMS. However, the ttyNCO does not activate (MODE=GSM). Following messages are generated during boot:

    Sep 4 17:00:13 localhost cardmgr[949]: config error, file './nokia_cs.conf' line 1: no function bindings

    Sep 4 17:00:14 localhost cardmgr[949]: + Warning: loading /lib/modules/2.4.18-3/pcmcia/nokia_cs.o will
    taint the kernel: no license

    Any idea for the error messages ?

    For WLAN, I ve not done trial so far.

    I m using Redhat 7.3 (kernel 2.4.18-3)

    Pekka Virtanen

  4. #4
    Registered User
    Join Date
    Mar 2003
    Posts
    20

    RE: Problems with the d211 nokia_ctl under linux.

    It is worth trying the new Linux version 1.02 available at http://www.nokia.com/phones/productsupport/d211/index.html.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×