×

Discussion Board

Results 1 to 10 of 10
  1. #1
    Registered User
    Join Date
    Dec 2005
    Posts
    5

    6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    Hello,

    I'm trying to read SMS out of a nokia 6630 with the provided usb cable + hyperterminal. I have installed the latest firmware (v5) on the phone.

    Sms sending works great, but I can't read them. It looks like I cannot select the SMS "bank" (sim/memory). Here's the at+cpms output:

    AT+CPMS?
    +CPMS: ,,,,,,,,
    OK
    AT+CPMS=?
    +CPMS: (),(),()
    OK

    Please help!
    Stephen

  2. #2
    Registered User
    Join Date
    Dec 2005
    Posts
    4

    Re: 6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    hi,

    my handphone model is nokia 6230. do u mind to tell me what AT command u type in order to sms? i have tried it. So, pls show me an example.

    Thank you very much.

  3. #3
    Registered User
    Join Date
    Dec 2005
    Posts
    5

    Re: 6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    Hi,

    assuming that your phone is correctly connected, the PIN code has been inserted and SMS Message Center number is correctly configured on your phone, try:

    ATZ<CR>
    AT+CMGF=1<CR>
    AT+CSCS="GSM"<CR>
    AT+CMGS="<telephone number>"<CR><...sms text...><CTRL+Z>

    where:
    <CR> stands for carriage return
    <CTRL+Z> Control+Z, (0x1A character)


    No idea on how to read SMS? I think there must be an AT command to select the memory to use (internal or MMC Card), but I don't know what it is...

    Stephen

  4. #4
    Registered User
    Join Date
    Jul 2005
    Posts
    31

    Re: 6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    Surely there are commands to read SMS. You can select PDU or Text Mode fine surely you can read the SMS.

    Almost every phone supports AT+CMGR but the 6630 d0esn't appear to. Do you need to put the phone into a particular mode first?

  5. #5
    Registered User
    Join Date
    Dec 2005
    Posts
    4

    Re: 6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    hi,

    i am using nokia mobile phone 6230. The followings are the code that i try for sms:

    ATZ
    ok
    AT+CMGF=1
    ok
    AT+CSCS="GSM"
    ok
    AT+CMGS="<0121234567>"<CR><...sms text...><CTRL+Z>
    error

    What causes this error response? Is it related to SMS Message Center Number?

    Thank you.

  6. #6
    Registered User
    Join Date
    Dec 2005
    Posts
    5

    Re: 6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    Maybe... it works for me! are you able to send sms by using the phone only?

  7. #7
    Registered User
    Join Date
    Nov 2004
    Posts
    3

    Re: 6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    I've read that receiving SMS on 6630 via AT is impossible.

    Having said that i can't even get mine to send anything. So I'm very curious as how you managed that? I just get ERROR on +CSMS ....

    Nice phone, but quite a few bits lacking...

  8. #8
    Registered User
    Join Date
    Feb 2006
    Posts
    3

    Re: 6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    Hi All,
    There is some issue with the 6630, sending SMS is ok with this phone, I could not receive/read any messages frmo this phone. I have set the message memory to "ME", "SM" and "TE" also. Nothing works. Please let me know if there is some workaround?
    Shery

  9. #9
    Registered User
    Join Date
    Feb 2006
    Posts
    2

    Re: 6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    Hi Nevez,

    I think a had similiar project with yours.
    Could you read my thread in SMS as well and give some ideas?

    thanks.

    best regards.

  10. #10
    Registered User
    Join Date
    Aug 2006
    Posts
    2

    Re: 6630 AT+CMGS works, +CPMS/+CMGR doesn't... please HELP!

    Please tell me how to send sms from the vb.net application.
    command iam using is
    AT+CMGF=1
    it response ok
    which iam reading and writting is like
    serialport.write("AT+CMGF=1")
    after getting the response in ok send sms command iam executing.
    serialport.write("AT+CMGS=" & smstophone & Chr(13) & " Application Test SMS " & Chr(26))
    But iam getting no response for that.
    Please help.
    Thanks in advance
    Chetna

Similar Threads

  1. Setting max height of CAKnPopupList - works on Emulator, not on Nokia 6630
    By godblesssymbian in forum Symbian User Interface
    Replies: 1
    Last Post: 2006-12-16, 10:31
  2. getSnapshot works on 6630, but not 7610
    By Gergall in forum Mobile Java General
    Replies: 1
    Last Post: 2005-10-05, 11:17
  3. 6630 network connection on O2
    By leisuresuit in forum Mobile Java Tools & SDKs
    Replies: 0
    Last Post: 2005-08-04, 21:06
  4. 6630 wallpaper bug
    By dakku in forum Symbian C++
    Replies: 0
    Last Post: 2004-12-29, 20:45
  5. Cannot Sync through bluetooth or usb on 6630
    By Un6rand3d in forum Bluetooth Technology
    Replies: 0
    Last Post: 2004-12-10, 09:14

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •