×

Discussion Board

Results 1 to 12 of 12
  1. #1
    Registered User
    Join Date
    Jul 2005
    Location
    italy
    Posts
    72

    [carbide.c++] ecom shape example problem

    hi all,

    i've imported the ecom-shape example in carbide from build.inf files:

    3 different project:
    shaperesolver .inf
    shapeimplementation .inf
    ecomShape .inf (testapp)

    all build process works fine, but when i try to launch the app in emulator, the starting process fail and this note is displayed: "Missing Ecom shape"...
    i'm confused... what can be my mistake?

    tanxx
    Leonardo

  2. #2
    Nokia Developer Expert
    Join Date
    Oct 2004
    Location
    Austin, TX USA
    Posts
    271

    Re: [carbide.c++] ecom shape example problem

    Leonardo,

    Can you please tell me what SDK you are using, and where to find this example?

    Thanks,

    Matt P.

  3. #3
    Registered User
    Join Date
    Jul 2005
    Location
    italy
    Posts
    72

    Re: [carbide.c++] ecom shape example problem

    hi Matt,

    thanks for your reply!
    the example is located here.

    and the sdk is "S60_2nd_FP2_CW"...

  4. #4
    Nokia Developer Expert
    Join Date
    Oct 2004
    Location
    Austin, TX USA
    Posts
    271

    Re: [carbide.c++] ecom shape example problem

    Hmm. I can't even build these projects inside Carbide at all. I get lots of "illegal use of incomplete struct/union/class 'CShape'" errors. I'll play with it some more and let you know what I come up with.

    Matt P.

  5. #5
    Registered User
    Join Date
    Jul 2005
    Location
    italy
    Posts
    72

    Re: [carbide.c++] ecom shape example problem

    ok tnx... i'm waiting your response

    i tell you what i've done:

    i've simply imported the example as three different project (shapeimplementation.dll, shaperesolver.dll and ecomshape.app), and i've checked necessary project references and user include. Doing this i was able to compile without errors all projects (for emulator). but when i run from carbide's emulator ecomshape project, in the applicationDocument constructL method (i've debugged it with breakpoints), the application starting process fails with the message: "Missing Ecom shap"..

    i hope i've been clear. sorry for my english

    Best
    Leonardo

  6. #6
    Registered User
    Join Date
    Jul 2005
    Location
    italy
    Posts
    72

    Re: [carbide.c++] ecom shape example problem

    another additional information:

    if i compile the projects for armi (not emulator), i'm able to make the correct sis file witch run fine on target device...

    i'm a bit confused...

  7. #7
    Registered User
    Join Date
    Nov 2005
    Posts
    42

    Re: [carbide.c++] ecom shape example problem

    I've also imported the ecomshape example to carbide.c++
    To compile it I put the shapeinterface.h and shapeinterface.inl in the epoc32/include directorie.
    It compiled but the emulator didn't work. It gives the following error:
    ERROR: cannot bind to port 3651, error 10048
    And it just doesn't open.

    I used the s60_2nd_fp3
    Suggestions?

    regards

  8. #8
    Registered User
    Join Date
    Jul 2005
    Location
    italy
    Posts
    72

    [solution]

    Hi!

    I've find the solution to my problem... The problem was that shapeinterface.dll and shaperesolver.dll have to be placed in {emulator}/z/system/libs/plugins directory..
    My carbide put this files in udeb root dir, and I've to place them "by hand" to correct position. Anyone knows how to correct this problem in project proprieties panel?

    bye
    Leonardo

  9. #9
    Registered User
    Join Date
    Nov 2005
    Posts
    42

    Re: [carbide.c++] ecom shape example problem

    Hi, I've fixed my previous problem and put the .dll in the correct place but I still have the same problem you had: "Missing Ecom shap" (using s60_2nd_fp2)

    Have you done something more??

    Have it really worked well?
    I've seen a forum thread where some people say carbide.c++ doesn't offers support to plugins (ecom) is that right?

    help appreciated

    regards

  10. #10
    Registered User
    Join Date
    Jul 2005
    Location
    italy
    Posts
    72

    Re: [carbide.c++] ecom shape example problem

    I really don't know... the problem for me was the dll location..
    yes it seems to work very well!

  11. #11
    Registered User
    Join Date
    Nov 2005
    Posts
    42

    Re: [carbide.c++] ecom shape example problem

    Just one more doubt
    Did it work on the emulator and also on the device?

    regards

  12. #12
    Registered User
    Join Date
    Jul 2005
    Location
    italy
    Posts
    72

    Re: [carbide.c++] ecom shape example problem

    Quote Originally Posted by olympio
    Just one more doubt
    Did it work on the emulator and also on the device?
    yes olympio, it works both... as usually i had problems with some specific paths (es. pkg file). but finally i was able to run it on emulator and device.
    if you want, cantact me by e-mail and i'll send u a zip file containing carbide project files.

    Bye
    Leonardo

Similar Threads

  1. J2ME: Problem in Nokia Solution for a software problem
    By mte01 in forum Mobile Java Tools & SDKs
    Replies: 4
    Last Post: 2011-06-08, 05:52
  2. problem when stop playing video on 3650 and try to play again
    By niko86 in forum Mobile Java General
    Replies: 5
    Last Post: 2007-08-03, 07:40
  3. Ringing problem with Nokia N70
    By DVogdos in forum Audio
    Replies: 2
    Last Post: 2007-06-26, 20:49
  4. J2ME: Problem in Nokia Solution for a media problem
    By mte01 in forum Mobile Java Tools & SDKs
    Replies: 0
    Last Post: 2005-08-12, 11:30
  5. PJava runtime problem within Nokia 9210, Hrlp~!
    By Nokia_Archive in forum PersonalJava
    Replies: 1
    Last Post: 2002-05-28, 13:15

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×