×

Discussion Board

Results 1 to 3 of 3
  1. #1
    Registered User
    Join Date
    Mar 2003
    Posts
    35

    How to send SMS using Nokia 6110 Mobile Phone using Data Cable.

    Hi All ,

    I am not able to Communicate with the Nokia 6110 phone with AT Commnads.
    When i installed the Nokia Data Suite some improvement was there but i could not send the SMS thru AT+CMGS.Any clues or suggestion from your side will be highly helpfull to me.
    Can anybody clarify me whether it is Necessary to use Nokia Data Suite to support the AT Commands for Nokia Mobile Phone 6110?
    Can anybody tell which model nokia phone doesnot require the Nokia Data Suite.


    Thanks in Advance,
    Naveen

  2. #2
    Nokia Developer Expert
    Join Date
    Mar 2003
    Location
    Tampere / Finland
    Posts
    1,839

    RE: How to send SMS using Nokia 6110 Mobile Phone using Data Cable.

    Hello!

    Data Suite or Connectivity SDK is required to communicate with 6110.

    Any data enabled phone works without Data Suite (7110, 6210, 6310, 6310i to name few)

    What happens when you try to issue the AT commands?

    Teemu / Forum Nokia

  3. #3
    Registered User
    Join Date
    Mar 2003
    Posts
    1

    RE: How to send SMS using Nokia 6110 Mobile Phone using Data Cable.

    I don't know exactly about a 6110, but for example with a 6310 you just need, a
    DLR-3P cable and a terminal program like hyperterm

    Comm Parameters are 8N1 and 57600 bit/s should work

    Just try "ATZ" and see if you get the "OK"

    good luck
    Patrick

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •