×

Discussion Board

Page 1 of 2 12 LastLast
Results 1 to 15 of 21
  1. #1
    Registered User
    Join Date
    Mar 2006
    Posts
    42

    I want to Communicate with my mobile using AT Commands

    Hello I have Nokia 3100, and I want to communicate with it using PC (AT Commands) Is it possible please let me know if aany body has knowledge about it..
    Thanks

  2. #2
    Registered User
    Join Date
    Jun 2006
    Posts
    2

    Re: I want to Communicate with my mobile using AT Commands

    I am over here for the same thing... But as per my knowledge, nokia model 3*** doesnt support at commands... its bcoz they dont have internal modem... only models having internal modem can support at commands... hyperterminal has been developed only for connecting modems... try finding a nokia model tat have internal mmodem in it... as far as i know nokia 7100 series has it...

  3. #3
    Registered User
    Join Date
    Mar 2006
    Posts
    42

    Re: I want to Communicate with my mobile using AT Commands

    hmm thanks for reply....I came to know that Nokia 3100 works on FBUS Protocol...If u have any knowledge about that then please let me know...
    Muhammad Ummar Iqbal Bhutta
    Student (Computer Engineering)
    University of Engineering and Technology Lahore

  4. #4
    Registered User
    Join Date
    Apr 2006
    Posts
    22

    Re: I want to Communicate with my mobile using AT Commands

    I don't know much about 3100. But Nokia 3310 or Nokia 3315 will work trough FBUS protocol.yo can send and receive SMSes using these mobile through Serial FBUS datacable.


    Regards
    V V RAJU

  5. #5
    Registered User
    Join Date
    Jun 2006
    Posts
    27

    Re: I want to Communicate with my mobile using AT Commands

    The nokia 3100 doesn't do anything but

    AT

    OK

    when you try to access it as a modem. The first model we found that worked as a modem was 3220

    http://www.europe.nokia.com/nokia/0,,58033,00.html

    I also bought the 3100 thinking it could be used as a modem. wound up giving to my kid to replace the one he forgot in his pocket and his mother stuck in the washing machine

    Here's the quick and dirty for sending an sms using at+c commands


    AT Returns a "OK" to confirm that modem is working
    AT+CPIN="xxxx" To enter the PIN for your SIM ( if enabled )

    AT+CPIN? do you need a pin code?

    AT+CPIN=<1111> give pin code for kyivstar pay as you go

    AT+CREG? A "0,1" reply confirms your modem is connected to GSM network
    AT+CSQ Indicates the signal strength, 31.99 is maximum


    AT+CMGF=1 To format SMS as a TEXT message

    AT+CSCA="+380672020000" set sms center for kyivstar



    AT+CMGS="+380675551212" <Enter>
    > Your SMS text message here <Ctrl-Z>


    receiving

    AT+CMGF=1 To format SMS as a TEXT message

    AT+CNMI=1,2,0,0,0 nokia set to list on DTE

    (i'm pretty sure this particular example leaves the sms on the phone, there are other params. that let you control display and storage., there is also a command that deletes all sms's from any given storage)

    Anyway, check out this file for all the details.
    http://sw.nokia.com/id/95672052-6c77...ts_v1_2_en.pdf


    Hope that helped. I thought Nokia should be a little clearer on the fact the 3100 doesn't work like a modem, it's kind what you are expecting when they say connect it to your PC. If the phone says in the advertisement "connect to the internet" it's a modem.

    Good luck



    AT+CIMI sim info


    or AT+CNUM number being used

    ATQ0V1E0 - OK
    AT+GMM - Nokia 5140i
    ATI1 - 356201009290465
    ATI2 - V 03.70
    25-08-05
    RM-104
    (c) Nokia.
    ATI3 - Nokia 5140i
    ATI4 - 2005_wk07

  6. #6
    Registered User
    Join Date
    Sep 2006
    Posts
    1

    Re: I want to Communicate with my mobile using AT Commands

    Hello!
    My question is also the same.I have a Nokia 3100, connection cable (serial RS232).I want to connect Nokia 3100 with PC and use AT commands.I have read that it's possible to use AT with 3100.But some say that Nokia 3100 doesn`t support AT, only fbus is supported?Can you please explain it clearer?Can we use AT commands for Nokia 3100 or not?How can we use it?
    Thank you for your help.

  7. #7
    Registered User
    Join Date
    Mar 2006
    Posts
    42

    Re: I want to Communicate with my mobile using AT Commands

    Hello Dear lethlinh:
    You have asked about Nokia 3100 communication with PC using AT Commands...So its not possible...u can only use FBus to communicate with such type of phone...1 thing to remember in this regard you can only use AT commands with that mobile sets which have a GSM/GPRS Modem built in, e.g. Nokia 6230, 6600, 6680..and SonyEricsson K300i, 700i,500i, etc....
    I hope it will be easy for u now to answer that which mobile supoorts AT commands and which don't
    If any problem then let me know
    Bye
    Ummar
    Muhammad Ummar Iqbal Bhutta
    Student (Computer Engineering)
    University of Engineering and Technology Lahore

  8. #8
    Registered User
    Join Date
    Nov 2006
    Posts
    1

    Re: I want to Communicate with my mobile using AT Commands

    Hello Ummar!
    If have you found any good documentation about FBUS protocol, please let me know. I also want to access my NOKIA3310 through FBUS. Another question is that, Is it possible to communicate with 3310 using AT Commands. Thanks a lot in anticipation.

  9. #9
    Registered User
    Join Date
    Mar 2006
    Posts
    42

    Re: I want to Communicate with my mobile using AT Commands

    Asalamoalikum Mr Asif:
    Dear it is not possible to communicate to Nokia 3310 using AT Commands...be Remember that AT Commands are possible to apply only on that sets which have GSM Moden present in them..e.g. Nokia 6600,6230 etc and SonyEricsson K300i,K500i etc etc...U can only communicate to Nokia 3310 using FBUS Protocol...I have some link to good articles of FBUS protocol..Please have a look

    http://wiki.gnokii.org/index.php/Protocol_description

    http://http://www.gadgets.demon.co.uk/

    http://www.embedtronics.com/nokia/fbus.html (Recommended)

    Please let me know if u have any question...and do share your work with me...as it will be helpful for me...
    Allahhafiz
    Muhammad Ummar Iqbal Bhutta
    Student (Computer Engineering)
    University of Engineering and Technology Lahore

  10. #10
    Registered User
    Join Date
    Feb 2007
    Posts
    3

    Re: I want to Communicate with my mobile using AT Commands

    sir,Muhammad Ummar Iqbal Bhutta
    i am a student of MSC electronics in Peshawra University. i am working on my final year project in which commnunication with mobile is required. i am trying to read sms from mobile using AT-command. could u provide me some liks or material that can help me to understand AT commands.
    or please e-mail me
    fahadgul_00@hotmail.com

  11. #11
    Registered User
    Join Date
    Mar 2006
    Posts
    42

    Re: I want to Communicate with my mobile using AT Commands

    Dear Shazad Asalamoalikum,
    Hmmm you want to communicate with your mobile?? Thats interesting......Please let me know that which mobile you are using....there are some mobiles in which you cann't read sms from mobile....however I have used SonyEricsson K300i... and it worked perfectly in all concerns....There are many interesting and articals availables about AT Commands on NET.. specialy on Nokia site....let me see some one good articale and I will send it on your E-mail address....Please let me know if any help is required..I will be happy for that....
    Allahhafiz
    Muhammad Ummar Iqbal Bhutta
    University of Engineering and Technology Lahore
    Muhammad Ummar Iqbal Bhutta
    Student (Computer Engineering)
    University of Engineering and Technology Lahore

  12. #12
    Registered User
    Join Date
    Feb 2007
    Posts
    3

    Re: I want to Communicate with my mobile using AT Commands

    Respected Sir(Muhammad Ummar Iqbal Bhutta)"Asalamoalikum"

    First of all thanks to reply. I don’t know which mobile set should I use, but as you stated that you have used SonyEricsson K300i and it worked perfectly so I should also use this mobile set.

    Sir could you provide me the complete AT command set of K300i and some VB6 source code that can help me to understand using AT commands because I am not so expert in VB6 as well AT commands. I know serial communication techniques in VB6 through MsComm control so I think it will be easy for me to develop such application in VB6 but without your help it will be so difficult for me to do.

    Keep shine forever
    Allah Hafiz

    ______________________________
    Shahzad Fahad
    Student (M.Sc Electronics)
    University of Peshawar, Peshawar
    ______________________________

  13. #13
    Registered User
    Join Date
    Mar 2007
    Posts
    3

    Re: I want to Communicate with my mobile using AT Commands

    hello sir ,
    i have the same prob as shehzad has, sir i want to communicate ma PC with mobile using AT commands, i m using K300i but i didnt get the actual AT commands which "ll communicate with mobile, can u help me plz & send me that commands & some procedure to communicate,

    i "ll be thankful for your favor,
    waiting 4 response,

    Regards:
    SaNe
    UET, Lahore

  14. #14
    Registered User
    Join Date
    Mar 2006
    Posts
    42

    Re: I want to Communicate with my mobile using AT Commands

    Asalamoalikum Dear!
    Thats very simple to communicate with your k300i using AT commands...just use an infrared device or Serial cable to connect ur mobile to PC.. after that start hyper terminal and set the baud rate and other options to default after that on main console write
    AT and press Enter The mobile will respond OK
    then try all other commands u will understand then how to communicate with ur mobile using AT Commands...Then If u want to write a program use any of computer language and just do the same thing as in Hyperterminal..
    Ok Take care
    Allahhafiz
    Muhammad Ummar Iqbal Bhutta
    Student (Computer Engineering)
    University of Engineering and Technology Lahore

  15. #15
    Registered User
    Join Date
    Mar 2007
    Posts
    3

    Re: I want to Communicate with my mobile using AT Commands

    Thanks,
    i want to read SMS from mob through hyper terminal , then i "ll implemen this this in ma program,
    i wanna know that one we use serial cable or infrared , ma question is can we use USB cable of K300i ???? to connent to PC
    ne way thanks again 4 ur favor , hope so after this i wuldnt get any prob InshahAllah ,
    sir can you send me AT commands available for K300i to ma mailbox ??? (optional)

    Regards:
    SaNe
    Comp. Science & Engg. UET, Lahore

Page 1 of 2 12 LastLast

Similar Threads

  1. executing linux commands from mobile phone
    By satya3050 in forum Mobile Java Networking & Messaging & Security
    Replies: 2
    Last Post: 2006-03-09, 23:06
  2. Replies: 0
    Last Post: 2005-02-16, 16:38
  3. Nokia Mobile VPN Client
    By marcyl in forum Symbian Networking & Messaging (Closed)
    Replies: 1
    Last Post: 2003-12-01, 14:47
  4. Replies: 4
    Last Post: 2003-04-07, 16:06
  5. Replies: 2
    Last Post: 2003-04-07, 11:07

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •