×

Discussion Board

Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    Super Contributor
    Join Date
    Dec 2004
    Posts
    643

    Arrow Python for S60 wiki

    Hi all,

    as some people already noticed, we now have a new "official" wiki for PyS60:

    http://wiki.opensource.nokia.com/pro...Python_for_S60

    All PyS60 hackers are welcome to contribute. I'd suggest this as the canonical place for gathering links to all the applications and extensions modules people have done.

    NOTE: To avoid spam, you have to log in before you can edit the pages. The CAPTCHA you need to pass is currently a bit harder than it should be: to register you need to enter the fuzzy text you see in _lower case_ even though it's shown in upper case. Caught me a few times.

    Big thanks to Matt Croydon for hosting the PyS60 wiki at postneo.com so far! Most of the content from that wiki has been imported and reorganized already, though there's still work left.

  2. #2
    Registered User
    Join Date
    Feb 2007
    Location
    Espoo, Finland
    Posts
    6

    Re: Python for S60 wiki

    Hello,
    I'd like to make a standalone application with py2sis and followed the instructions in http://www.mobilenin.com/pys60/info_...pplication.htm.

    The uidcrc was not found, where can I find it from?

    C:\USERS\PyS60\myapps>py2sis run.py myfirst.sis --uid=0x0FFFFFFF --appname=myfir
    st
    Creating SIS for SDK2.0 and later
    ERROR 'uidcrc' utility not found. Please make sure you have the Symbian SDK corr
    ectly installed and configured

    C:\USERS\PyS60\myapps>


    The instructions mention Nokia 6630 has S60 2nd edition and FP2. I thought it should be FP3. Which one is correct, and does it have an impact on py2sis?

    "This will get you the s60_2nd_fp2_sdk_msb.zip file, unzip it and run the setup.exe file to install the SDK (Which SDK is the correct one depends on your phone model. The one referred to in here is for Nokia 6630)."
    BR,
    http://Risto.Mononen.at.openlaboratory.net

  3. #3
    Super Contributor
    Join Date
    May 2006
    Location
    Oulu, Finland
    Posts
    622

    Re: Python for S60 wiki

    Hi Risto,

    If you are trying to make a standalone application for 3rd edition devices, Jurgen's tutorial won't help since this part is only correct for 2nd edition.

    I'm not sure but have you installed 2nd and 3rd edition SDKs on the same machine? It looks like.

    To make your life easier jethro.fn has made a python script, ensymble, that embeds all tools for making standalone applications. Check it and its documentation at http://www.nbl.fi/jussi.ylanen/ensymble.html

    B.R

    LFD
    Devices:
    Nokia E61 3rd Edition - pys60 1.4.0

    Tips and modules:
    http://www.lfdm.net/thesis

  4. #4
    Registered User
    Join Date
    Mar 2007
    Posts
    3

    Re: Python for S60 wiki

    Quote Originally Posted by risto.mononen
    C:\USERS\PyS60\myapps>py2sis run.py myfirst.sis --uid=0x0FFFFFFF --appname=myfirst[/INDENT]
    Hi i'm a beginner and trying to make a standalone app too but what must i write for "uid" section?
    In example i make my a.sis with uid=0x0FFFFFFF and install to my 7610.It works OK.But when i make b.sis with the same uid(uid=0x0FFFFFFF) and try to install on my phone it warns me "if want to replace 1.00 with 1.00"
    Do i have to make or choose a different uid everytime i make a sis?
    How do i choose it? What is uid?
    Thanx already.

  5. #5
    Super Contributor
    Join Date
    May 2006
    Location
    Oulu, Finland
    Posts
    622

    Re: Python for S60 wiki

    Hi aden2004 and be welcome to the forum

    The UID is a unique identifier.

    it warns me "if want to replace 1.00 with 1.00"
    Every applications have a unique number, it is the consequence when you use the same UID. The phone thinks that you want to upgrade your application.

    Do i have to make or choose a different uid everytime i make a sis?
    One per application.

    How do i choose it? What is uid?
    I'm not exactly sure at the moment but it should be in a certain range 0x01000000 - 0x0FFFFFFF if I'm not mistaking.

    Now there's an alternative, called ensymble (by jethro.fn) to make your installation package. You might be interested in using it!

    Happy Pythoning

    LFD
    Devices:
    Nokia E61 3rd Edition - pys60 1.4.0

    Tips and modules:
    http://www.lfdm.net/thesis

  6. #6
    Super Contributor
    Join Date
    May 2004
    Location
    Tampere, Finland
    Posts
    524

    Re: Python for S60 wiki

    Quote Originally Posted by aden2004
    In example i make my a.sis with uid=0x0FFFFFFF and install to my 7610
    Quote Originally Posted by lfd
    Now there's an alternative, called ensymble (by jethro.fn) to make your installation package. You might be interested in using it!
    Unfortunately Ensymble is incompatible with 7610, which is a 2nd Edition FP1 device.

  7. #7
    Registered User
    Join Date
    Feb 2005
    Location
    Belgium (Europe)
    Posts
    1,352

    Re: Python for S60 wiki

    Quote Originally Posted by jethro.fn
    Unfortunately Ensymble is incompatible with 7610, which is a 2nd Edition FP1 device.
    But perhaps there's a solution : Python to Sis

    Cyke64
    pys60 1.4.5 and 2.0.0, pygame, PyS60 CE on E90 and 5800 !

    Find my pys60 extension modules on cyke64.googlepages.com

  8. #8
    Registered User
    Join Date
    Jul 2007
    Location
    india
    Posts
    19

    Re: Python for S60 wiki

    thanks brother for informing us.
    kunal shastry.

  9. #9
    Super Contributor
    Join Date
    Oct 2007
    Location
    Deva, Romania
    Posts
    3,471

    Re: Python for S60 wiki

    There's also an article on the official Forum Nokia Wiki:
    http://wiki.forum.nokia.com/index.php/Python

    And for Python beginners, there's an article about the basics here:
    http://wiki.forum.nokia.com/index.ph...ython_Elements
    Last edited by bogdan.galiceanu; 2008-01-24 at 08:06.

  10. #10
    Registered User
    Join Date
    Nov 2006
    Posts
    568

    Re: Python for S60 wiki

    <grmmpfgrmpfff>

  11. #11
    Regular Contributor
    Join Date
    Sep 2008
    Location
    Bhavnagar
    Posts
    115

    Re: Python for S60 wiki

    Tnks frds

    its realy usefull for us its realy
    good,

  12. #12
    Super Contributor
    Join Date
    Oct 2008
    Location
    INDIA
    Posts
    2,326

    Re: Python for S60 wiki

    ya ,its realy useful for the beginer.
    thanks

  13. #13
    Registered User
    Join Date
    Sep 2008
    Posts
    2

    Re: Python for S60 wiki

    Hi,

    I've written a basic tutorial for PyS60 in brazillian portuguese in Forum Nokia's Wiki:

    http://wiki.forum.nokia.com/index.ph...ython_para_S60

    Please, feel free to change, improve or fix errors in the document.

    Portuguese
    ==========

    Olá,

    Eu escrevi um tutorial para PyS60 em português no Wiki do Forum Nokia.

    http://wiki.forum.nokia.com/index.ph...ython_para_S60

    Sinta-se à vontade para alterá-lo, melhorá-lo ou para corrigir erros no documento.

    Este é o tutorial completo de onde surgiu a versão resumida que está sendo publicada no blog Zona Livre do site da revista Info:

    http://info.abril.com.br/blog/zonalivre/

  14. #14
    Nokia Developer Moderator
    Join Date
    May 2007
    Location
    21.46 N 72.11 E
    Posts
    3,795

    Re: Python for S60 wiki

    Hi Osvaldo,

    Nice to see you here.

    Just checked it ! Its really a good article

    Could you do one for english too ? If not let me know and I would add it

    Best Regards,
    Croozeus
    Pankaj Nathani
    www.croozeus.com

  15. #15
    Super Contributor
    Join Date
    Feb 2008
    Location
    Belo Horizonte, Brazil
    Posts
    744

    Re: Python for S60 wiki

    Quote Originally Posted by osantanabr View Post
    Hi,

    I've written a basic tutorial for PyS60 in brazillian portuguese in Forum Nokia's Wiki:

    http://wiki.forum.nokia.com/index.ph...ython_para_S60

    Please, feel free to change, improve or fix errors in the document.

    Portuguese
    ==========

    Olá,

    Eu escrevi um tutorial para PyS60 em português no Wiki do Forum Nokia.

    http://wiki.forum.nokia.com/index.ph...ython_para_S60

    Sinta-se à vontade para alterá-lo, melhorá-lo ou para corrigir erros no documento.

    Este é o tutorial completo de onde surgiu a versão resumida que está sendo publicada no blog Zona Livre do site da revista Info:

    http://info.abril.com.br/blog/zonalivre/
    English
    ===========

    Hi Oswaldo,

    Very cool tutorial, I'm sure it will be a start point for many Brazilian developers

    As Pankaj suggests, it would be cool if you can translate it to English too!

    Great work


    Portuguese
    ===========

    Olá Oswaldo,

    Muito legal o tutorial, tenho certeza de que será um começo para muitos desenvolvedores brasileiros

    Como o Pankaj sugeriu, seria interessante traduzi-lo para inglês também!

    Bom trabalho


    BR,

    Rafael.
    Last edited by Rafael T.; 2008-11-28 at 15:54.

Similar Threads

  1. Python for Series 60 released on Forum Nokia!
    By eriksmartt in forum Symbian
    Replies: 5
    Last Post: 2009-07-14, 17:00
  2. Use filebrowser.py to execute your python scripts.
    By zweiberg in forum Symbian Tools & SDKs
    Replies: 1
    Last Post: 2006-11-01, 13:24
  3. Python 2.2? 2.3?
    By mflux in forum Symbian
    Replies: 3
    Last Post: 2006-06-26, 22:36
  4. Python C++ Extension with Callback crashing
    By diggerdeep in forum Symbian
    Replies: 2
    Last Post: 2005-11-10, 16:33
  5. Python for Series 60 wiki in the Internet
    By tapio111 in forum Symbian
    Replies: 0
    Last Post: 2005-01-05, 14:12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
×